240sx r154 transmission question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Turb · 09-28-2015, 05:57 PM

Okay so I have a 240sx with a 1jz and r154 transmission and I've had some grinding between 2nd and 3rd gear, thinking she just needed a tranny oil change when i jacked her up ( Im not at all familiar with a 1jz or r154, I just bought it so don't crucify me) and it seems like something is missing, like around where the fly wheel is there suppose to be a cover?

Z32TwinTurbo · 09-28-2015, 06:23 PM

Nope

....

Racerfanny · 09-29-2015, 12:18 AM

Ask dealer to solve the problem

darcyjohan · 09-29-2015, 04:30 AM

There are actually covers you can get for those inspection holes. Not sure on part numbers for the r154 covers but these are my v160 covers that I bent and cut a little bit and bolted on to my r154.

S-Verteen · 09-29-2015, 08:26 AM

You are missing a dust cover for sure. My suggestions are changing the oil to redline if it isn't already. Next is to bleed the clutch and check the slave cylinder is moving the correct distance. if this doesn't work syncros are probably done for check out Marlin Crawler.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-28-2015, 06:23 PM	#2
Z32TwinTurbo Zilvia Junkie Join Date: Nov 2013 Location: Sacramento, CA Age: 24 Posts: 526 Trader Rating: (0) Feedback Score: 0 reviews	Nope ....

09-29-2015, 12:18 AM	#3
Racerfanny Join Date: Sep 2015 Location: USA Age: 39 Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Ask dealer to solve the problem

09-29-2015, 04:30 AM	#4
darcyjohan Join Date: May 2012 Location: australia Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	There are actually covers you can get for those inspection holes. Not sure on part numbers for the r154 covers but these are my v160 covers that I bent and cut a little bit and bolted on to my r154.

09-29-2015, 08:26 AM	#5
S-Verteen Leaky Injector Join Date: Jun 2013 Location: Quad Cities Posts: 96 Trader Rating: (0) Feedback Score: 0 reviews	You are missing a dust cover for sure. My suggestions are changing the oil to redline if it isn't already. Next is to bleed the clutch and check the slave cylinder is moving the correct distance. if this doesn't work syncros are probably done for check out Marlin Crawler.