92 de won't start after mt swap. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cconn32563 · 03-20-2016, 09:21 PM

Car ran great excluding the auto transmission only having low. Got everything swapped still using auto ecu and lower harness. Reverse lights and dash lights work fine. Engine turns over but won't fire up. Seems to be getting fuel but no spark. Any ideas?

Sent from my KYOCERA-C6745 using Tapatalk

03-21-2016, 08:15 AM

--Deleted--

cconn32563 · 03-21-2016, 09:00 AM

I found a forum that said I all the wiring I needed to do was , connect the lower gauge black wire and the low gauge brown wire off the auto shift linkage together. Then take the light green and high gauge black wire and connect to the reverse sensor on transmission and just hook up the vss as normal.

Sent from my KYOCERA-C6745 using Tapatalk

cconn32563 · 03-21-2016, 08:18 PM

Original problem fixed was a lose ground right below the valve cover, it fires up now but won't stay running without the gas being held down

Sent from my KYOCERA-C6745 using Tapatalk

03-20-2016, 09:21 PM	#1
cconn32563 Join Date: Feb 2016 Location: US Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	92 de won't start after mt swap. Car ran great excluding the auto transmission only having low. Got everything swapped still using auto ecu and lower harness. Reverse lights and dash lights work fine. Engine turns over but won't fire up. Seems to be getting fuel but no spark. Any ideas? Sent from my KYOCERA-C6745 using Tapatalk

03-21-2016, 08:15 AM	#2
Tucker240 Guest Posts: n/a	--Deleted-- Last edited by Tucker240; 03-17-2019 at 11:45 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-21-2016, 09:00 AM	#3
cconn32563 Join Date: Feb 2016 Location: US Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	I found a forum that said I all the wiring I needed to do was , connect the lower gauge black wire and the low gauge brown wire off the auto shift linkage together. Then take the light green and high gauge black wire and connect to the reverse sensor on transmission and just hook up the vss as normal. Sent from my KYOCERA-C6745 using Tapatalk

03-21-2016, 08:18 PM	#4
cconn32563 Join Date: Feb 2016 Location: US Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Original problem fixed was a lose ground right below the valve cover, it fires up now but won't stay running without the gas being held down Sent from my KYOCERA-C6745 using Tapatalk