KA24E 4-pin Distributor Wiring Diagram? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Slim240 · 09-15-2019, 11:25 AM

I cant seem to find a wiring diagram for a KA24E's distributor. I need to test for a short in the crank angle position sensor since im not getting spark or fuel. The colors on the harness side are blk, blk/wht, grn/blk, and grn/ylw. I was wondering if anyone has either found a diagram or can tell me what color corresponds to what. Thanks

Slim240 · 09-15-2019, 12:03 PM

Ive done a little more digging into the FSM and found that B and G/B are grounds while G/B runs to the ECU pins 22 and 30. G/Y Also runs to the ECU pins 31 and 40 and B/W runs to ECU pin 47 and the ECCS Relay.

09-15-2019, 11:25 AM	#1
Slim240 Join Date: Aug 2019 Location: New Jersey Age: 20 Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	KA24E 4-pin Distributor Wiring Diagram? I cant seem to find a wiring diagram for a KA24E's distributor. I need to test for a short in the crank angle position sensor since im not getting spark or fuel. The colors on the harness side are blk, blk/wht, grn/blk, and grn/ylw. I was wondering if anyone has either found a diagram or can tell me what color corresponds to what. Thanks Last edited by Slim240; 09-15-2019 at 11:57 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-15-2019, 12:03 PM	#2
Slim240 Join Date: Aug 2019 Location: New Jersey Age: 20 Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	Ive done a little more digging into the FSM and found that B and G/B are grounds while G/B runs to the ECU pins 22 and 30. G/Y Also runs to the ECU pins 31 and 40 and B/W runs to ECU pin 47 and the ECCS Relay.