97 240sx p1105 MAP/BARO Switch/Solenoid Valve - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jin8544 · 11-19-2009, 01:41 PM

i got that code...
what could be the problem?
i have hard time starting it sometimes but it runs find once it start..
help me!!!

aznpoopy · 11-19-2009, 01:59 PM

the obvious thing to do is start with the map/baro switch solenoid valve.

little box on top of the intake manifold with 3 vacuum lines coming out of it.

you can run through the full diagnosis listed in the factory service manual, or buy one from the dealer, replace it and hope the box itself was the problem.

***S14DB*** · 11-19-2009, 02:31 PM

The MAP sensor attached to it goes out commonly. Make sure you get the sensor with the straight out connector not the evap sensor with the 90* vac connector. They have similar part numbers and the evap sensor comes up first in the list.

It is located on your passenger strut tower behind the fuse box.

jin8544 · 11-19-2009, 03:55 PM

do you guys know anywhere i can download service manual for s14 kouki?

aznpoopy · 11-19-2009, 05:16 PM

go to google and type "240sx FSM," first result

jin8544 · 11-19-2009, 06:51 PM

i got it thanks
but what do you guys think are the problems..?

11-19-2009, 01:41 PM	#1
jin8544 Zilvia Junkie Join Date: Feb 2007 Location: Carbondale IL Posts: 458 Trader Rating: (6) Feedback Score: 6 reviews	97 240sx p1105 MAP/BARO Switch/Solenoid Valve i got that code... what could be the problem? i have hard time starting it sometimes but it runs find once it start.. help me!!!

11-19-2009, 02:31 PM	#3
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	The MAP sensor attached to it goes out commonly. Make sure you get the sensor with the straight out connector not the evap sensor with the 90* vac connector. They have similar part numbers and the evap sensor comes up first in the list. It is located on your passenger strut tower behind the fuse box. __________________ Comments should be taken as Opinions not as Statements of Fact

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-19-2009, 01:59 PM	#2
aznpoopy Post Whore! Join Date: Mar 2003 Location: New Jersey Age: 40 Posts: 5,013 Trader Rating: (1) Feedback Score: 1 reviews	the obvious thing to do is start with the map/baro switch solenoid valve. little box on top of the intake manifold with 3 vacuum lines coming out of it. you can run through the full diagnosis listed in the factory service manual, or buy one from the dealer, replace it and hope the box itself was the problem.

11-19-2009, 03:55 PM	#4
jin8544 Zilvia Junkie Join Date: Feb 2007 Location: Carbondale IL Posts: 458 Trader Rating: (6) Feedback Score: 6 reviews	do you guys know anywhere i can download service manual for s14 kouki?

11-19-2009, 05:16 PM	#5
aznpoopy Post Whore! Join Date: Mar 2003 Location: New Jersey Age: 40 Posts: 5,013 Trader Rating: (1) Feedback Score: 1 reviews	go to google and type "240sx FSM," first result

11-19-2009, 06:51 PM	#6
jin8544 Zilvia Junkie Join Date: Feb 2007 Location: Carbondale IL Posts: 458 Trader Rating: (6) Feedback Score: 6 reviews	i got it thanks but what do you guys think are the problems..?