Gleeso's Sileighty - Page 7 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Gleeso · 10-03-2013, 05:34 AM

Rolled the car out again today to get some more Vitamin D, because I can do that, and gave it a wash as well, since it hasn't recieved one in over a year and then some.

Since the car was all clean now, I got around to chucking the engine in for the first time. It was a pretty momentous event. It gave me many feels.

soundboy · 10-03-2013, 05:39 PM

nice build.

the_brownie1 · 10-03-2013, 06:27 PM

the build is just full of win!!

Darren · 10-04-2013, 02:43 PM

looking good, but needs moar low!

Gleeso · 10-05-2013, 02:58 AM

Bolted on some more goodies yesterday to allow for mocking up of parts. Looks all kinds of pretty.

Also sanded back and primed up the brackets for the oil cooler so I could fit that up as well. I forgot how good it all looks together. Just need a Koyo N-Flow radiator to complete the picture.

I don't plan on putting an aftermarket manifold on it just yet. I can always add an aftermarket one on later and take it for a re-tune, so I decided to clean up one of my many intake mani's that I have laying around. I soaked it with oven cleaner and left it over night.

future · 10-05-2013, 12:01 PM

Can't even tell it's there lol

Gleeso · 10-05-2013, 10:22 PM

Quote:

Originally Posted by future

Can't even tell it's there lol

Can't even tell what's where? The intake mani amongst the oven cleaner suds?

Gleeso · 11-05-2013, 02:28 AM

After Nigel Petrie has decided to not make his conversion kit any more, I've had to do a bit of research as to which one will be best for me. I looked at the Mazworx, but I decided against it because of the shifter position, and the AO kit just didn't do it for me, so this is the list that I've come to conclusion with:

I was initially getting the kit without the driveshaft because it could've just been easier and cheaper to get one made up here, but after luck would have it, a mate happened to have the driveshaft from the kit that I'm getting, fucking score!

I went and picked it up today:

ka-titties · 11-05-2013, 11:01 AM

Quote:

Originally Posted by Gleeso

Since the car was all clean now, I got around to chucking the engine in for the first time. It was a pretty momentous event. It gave me many feels.

can i make a request? can you describe these feels in INTENSE detail?

Hatemy7 · 11-05-2013, 02:10 PM

wow I have to say that you are doing fabulous work mate ( lol )

Overall I am following this thread

Darren · 11-06-2013, 11:56 AM

I am very interested in that Z32 adapter kit, i have done a bit of research and come to the same conclusion.

Besides the shifter position with the Mazworks kit, it also requires some machining of the Z32 trans bell housing so i want to stay away from making permanent changes to the trans in case of having to resell, or w/e...

Please go into some detail about the kit if you can. Fitment, quality, etc...

Thanks, and as usual, looking good!

Gleeso · 11-07-2013, 09:47 PM

As soon as I get the kit, I'll post it detail how it all went.

That's exactly it, I'm not a fan of making permanent changes on the trans.

*brndck* · 01-12-2014, 12:02 AM

fantastic build! i just ordered that same p/s bracket from taarks (and a pile of other shit as well)

any new updates?

Gleeso · 06-27-2014, 08:54 AM

Nah, no new updates, sadly. Building a house, so deposits had to be paid, and my daily (180SX) shot a rod so I'm almost done with rebuilding a donor engine, which will then be sold and I'll be on the prowl for an M35 daily.

Progress on this will happen later in the year.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2013, 05:34 AM	#181
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Rolled the car out again today to get some more Vitamin D, because I can do that, and gave it a wash as well, since it hasn't recieved one in over a year and then some. Since the car was all clean now, I got around to chucking the engine in for the first time. It was a pretty momentous event. It gave me many feels.

10-03-2013, 05:39 PM	#182
soundboy Zilvia Junkie Join Date: Aug 2013 Location: trinidad Age: 41 Posts: 320 Trader Rating: (0) Feedback Score: 0 reviews	nice build.

10-03-2013, 06:27 PM	#183
the_brownie1 Join Date: Sep 2013 Location: GA Age: 33 Posts: 24 Trader Rating: (1) Feedback Score: 1 reviews	the build is just full of win!!

10-04-2013, 02:43 PM	#184
Darren Zilvia Addict Join Date: Apr 2010 Location: kelowna, bc, canada Age: 45 Posts: 680 Trader Rating: (1) Feedback Score: 1 reviews	looking good, but needs moar low!

10-05-2013, 02:58 AM	#185
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Bolted on some more goodies yesterday to allow for mocking up of parts. Looks all kinds of pretty. Also sanded back and primed up the brackets for the oil cooler so I could fit that up as well. I forgot how good it all looks together. Just need a Koyo N-Flow radiator to complete the picture. I don't plan on putting an aftermarket manifold on it just yet. I can always add an aftermarket one on later and take it for a re-tune, so I decided to clean up one of my many intake mani's that I have laying around. I soaked it with oven cleaner and left it over night.

11-05-2013, 02:28 AM	#188
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	After Nigel Petrie has decided to not make his conversion kit any more, I've had to do a bit of research as to which one will be best for me. I looked at the Mazworx, but I decided against it because of the shifter position, and the AO kit just didn't do it for me, so this is the list that I've come to conclusion with: I was initially getting the kit without the driveshaft because it could've just been easier and cheaper to get one made up here, but after luck would have it, a mate happened to have the driveshaft from the kit that I'm getting, fucking score! I went and picked it up today:

11-05-2013, 02:10 PM	#190
Hatemy7 Zilvia FREAK! Join Date: Mar 2008 Location: Chicago Il Age: 36 Posts: 1,367 Trader Rating: (0) Feedback Score: 0 reviews	wow I have to say that you are doing fabulous work mate ( lol ) Overall I am following this thread

11-06-2013, 11:56 AM	#191
Darren Zilvia Addict Join Date: Apr 2010 Location: kelowna, bc, canada Age: 45 Posts: 680 Trader Rating: (1) Feedback Score: 1 reviews	I am very interested in that Z32 adapter kit, i have done a bit of research and come to the same conclusion. Besides the shifter position with the Mazworks kit, it also requires some machining of the Z32 trans bell housing so i want to stay away from making permanent changes to the trans in case of having to resell, or w/e... Please go into some detail about the kit if you can. Fitment, quality, etc... Thanks, and as usual, looking good!

11-07-2013, 09:47 PM	#192
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	As soon as I get the kit, I'll post it detail how it all went. That's exactly it, I'm not a fan of making permanent changes on the trans.

06-27-2014, 08:54 AM	#194
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Nah, no new updates, sadly. Building a house, so deposits had to be paid, and my daily (180SX) shot a rod so I'm almost done with rebuilding a donor engine, which will then be sold and I'll be on the prowl for an M35 daily. Progress on this will happen later in the year.