|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
04-27-2005, 09:38 PM | #1 |
Help Rough Idling on ka24de
The car Idles funny, it fluctuates from 850rpm down to 600 at a dead stop. The last time it did this, it was one of the injectors. Is that possible. I'm sure it could be, but what else could it possibly be?
__________________
|
|
Sponsored Links |
04-27-2005, 11:06 PM | #2 |
Leaky Injector
|
Check the harness for your coolant temp sensor. Make sure it is securely connected and the wiring is all connected to the clips properly as well. This should stop any decel. shaking if you have it.
|
04-28-2005, 12:12 AM | #3 |
Zilvia FREAK!
Join Date: Jun 2003
Location: Berkeley/San Francisco
Posts: 1,435
Trader Rating: (0)
Feedback Score: 0 reviews
|
i just had the same problem. is your check engine light on? could be o-rings, injector, cracked hose, among other things. for me, i just did some hard driving and it cleared up all the gunk that was probably stuck.
__________________
There is a time in every man's education when he arrives at the conviction that envy is ignorance; that imitation is suicide; that he must take himself for better for worse as his portion; that though the wide universe is full of good, no kernel of nourishing corn can come to him but through his toil bestowed on that plot of ground which is given to him to till. -Emerson |
04-28-2005, 02:31 PM | #6 |
Zilvia Member
|
the last time i had idle problems like that it was my intake manifold gasket. just spray some carb cleaner to check vacuum leaks.
__________________
people on Zilvia need a big ol |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|