Seat belt light - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dreambuild808 · 09-05-2011, 08:15 PM

hi i have an 89 240sx and my auto seatbelts still work but my dash light blink. it so annoying

. where is the sensor for the light? i have 180sx seats but the passanger side seat the guy before me took out the lap belt buckle and idk if thats the reason. help please

harrypotter · 09-05-2011, 08:52 PM

The lap belt connected has a sensor on it. You have to take out the seat to get to the wiring. All you need to have is a ratchet with a 14mm socket, only 3 bolts and one nut hold the seat in. Or you can reach under the seat and see if you can get it that way.

Good luck and welcome to zilvia! There are two threads you should have posted in. One is the introduction thread. The other is the small questions thread. You can use the search button above to the right.

Dreambuild808 · 09-05-2011, 09:43 PM

ya sorry i dont know the site well just new to zilvia.net how would i disable it after i get to it becuase the passanger side buckle was taken out by previous owner but the drivers one is ther thanks

harrypotter · 09-05-2011, 10:13 PM

Should be able to just complete the circuit. Cheap way would be to just use any kind of covered wire and make it into a jumper. But do at your own risk! Any passenger still needs a seat belt!

dkim1985 · 01-07-2013, 06:19 PM

i know this is an old thread but I'm having the same problem.
after i take the seat out to expose the wiring...what do i do from there?

i dont mind fixing it. i see no need to disable it. why not keep it working if i can.

09-05-2011, 08:15 PM	#1
Dreambuild808 Leaky Injector Join Date: Sep 2011 Location: San Diego Age: 28 Posts: 64 Trader Rating: (2) Feedback Score: 2 reviews	Seat belt light hi i have an 89 240sx and my auto seatbelts still work but my dash light blink. it so annoying. where is the sensor for the light? i have 180sx seats but the passanger side seat the guy before me took out the lap belt buckle and idk if thats the reason. help please

09-05-2011, 08:52 PM	#2
harrypotter Zilvia Junkie Join Date: Jun 2010 Location: Crestview FL Posts: 574 Trader Rating: (19) Feedback Score: 19 reviews	The lap belt connected has a sensor on it. You have to take out the seat to get to the wiring. All you need to have is a ratchet with a 14mm socket, only 3 bolts and one nut hold the seat in. Or you can reach under the seat and see if you can get it that way. Good luck and welcome to zilvia! There are two threads you should have posted in. One is the introduction thread. The other is the small questions thread. You can use the search button above to the right. __________________

09-05-2011, 10:13 PM	#4
harrypotter Zilvia Junkie Join Date: Jun 2010 Location: Crestview FL Posts: 574 Trader Rating: (19) Feedback Score: 19 reviews	Should be able to just complete the circuit. Cheap way would be to just use any kind of covered wire and make it into a jumper. But do at your own risk! Any passenger still needs a seat belt! __________________

01-07-2013, 06:19 PM	#5
dkim1985 Zilvia Addict Join Date: Apr 2011 Location: Gardena, CA Posts: 771 Trader Rating: (28) Feedback Score: 28 reviews	i know this is an old thread but I'm having the same problem. after i take the seat out to expose the wiring...what do i do from there? i dont mind fixing it. i see no need to disable it. why not keep it working if i can. __________________ FS: Nismo R-Tune Camshafts for VQ35DE.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-05-2011, 09:43 PM	#3
Dreambuild808 Leaky Injector Join Date: Sep 2011 Location: San Diego Age: 28 Posts: 64 Trader Rating: (2) Feedback Score: 2 reviews	ya sorry i dont know the site well just new to zilvia.net how would i disable it after i get to it becuase the passanger side buckle was taken out by previous owner but the drivers one is ther thanks