shielded wires question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nicku · 05-01-2008, 12:34 PM

Hey guys...
I am about to buy some shielded wires for my MAF wiring on ebay.
I am just wondering how many gauges of shielded wires I should buy?

should I buy this one?
http://cgi.ebay.com/50-22-AWG-Shield...QQcmdZViewItem

or this one

http://cgi.ebay.com/50-22-AWG-Shield...QQcmdZViewItem

or any other suggestion?

awesomenick · 05-01-2008, 12:52 PM

Those are both 22 gauge.

clark · 05-01-2008, 12:58 PM

i used sheielding from Cat5 cable and have not had a problem with my MAF signal, same deal. all it does is shield the wire from emi. which is what that jacket on cat5 cable does.

i also used a haggared KA harness for anotehr SR harness job i did.

so if you have an old ka harness lying around use the wiring off of that.

nicku · 05-01-2008, 03:49 PM

what is cat5?

so do either of those work?

pbcstylez · 05-01-2008, 03:50 PM

cat5 is ur typical router/network cables

nicku · 05-01-2008, 07:41 PM

so anybody know if i want to buy the shielded wires, what size should I buy?

05-01-2008, 12:34 PM	#1
nicku Zilvia Junkie Join Date: Aug 2007 Location: St. Cloud, MN Age: 37 Posts: 545 Trader Rating: (0) Feedback Score: 0 reviews	shielded wires question Hey guys... I am about to buy some shielded wires for my MAF wiring on ebay. I am just wondering how many gauges of shielded wires I should buy? should I buy this one? http://cgi.ebay.com/50-22-AWG-Shield...QQcmdZViewItem or this one http://cgi.ebay.com/50-22-AWG-Shield...QQcmdZViewItem or any other suggestion?

05-01-2008, 03:50 PM	#5
pbcstylez Nissanaholic! Join Date: May 2005 Location: East Bay Age: 36 Posts: 2,110 Trader Rating: (0) Feedback Score: 0 reviews	cat5 is ur typical router/network cables __________________ parking lot pimpin... Seller Feedback here: http://www.zilvia.net/f/showthread.p...ight=pbcstylez

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2008, 12:52 PM	#2
awesomenick Zilvia Addict Join Date: May 2006 Location: UT Age: 32 Posts: 944 Trader Rating: (33) Feedback Score: 33 reviews	Those are both 22 gauge.

05-01-2008, 12:58 PM	#3
clark Zilvia FREAK! Join Date: Mar 2008 Location: new york Posts: 1,035 Trader Rating: (1) Feedback Score: 1 reviews	i used sheielding from Cat5 cable and have not had a problem with my MAF signal, same deal. all it does is shield the wire from emi. which is what that jacket on cat5 cable does. i also used a haggared KA harness for anotehr SR harness job i did. so if you have an old ka harness lying around use the wiring off of that.

05-01-2008, 03:49 PM	#4
nicku Zilvia Junkie Join Date: Aug 2007 Location: St. Cloud, MN Age: 37 Posts: 545 Trader Rating: (0) Feedback Score: 0 reviews	what is cat5? so do either of those work?

05-01-2008, 07:41 PM	#6
nicku Zilvia Junkie Join Date: Aug 2007 Location: St. Cloud, MN Age: 37 Posts: 545 Trader Rating: (0) Feedback Score: 0 reviews	so anybody know if i want to buy the shielded wires, what size should I buy?