Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 02-28-2012, 12:43 PM   #1
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
1995 S14 VQ35DE Swap

I had a 04 G35 coupe that i had an extra engine for that is no more then i was left with a VQ35DE and a lot of parts that would not fit the 2010 Mustang GT so I bought a car to go with my engine.

I bought 1995 240SX automatic but it only had 73,xxx miles got it from a little old lady. no ready little old lady.



this how I got it







first this new rims















Rear sub frame bushing where shot so did Next











cleared and smoked hazzy headlights



painted new fender to match will change color off car but did not want a wrecked fender or a green one





My VQ35DE swap parts









clutch peddel since my car is an automatic











Most swaps i have seen use a new shifter braket i cut and welded the old one shifts fine setting on the table I will see if it works in the car and post a fallow up answer



block cleaned and painted





ACL Race bearings installed





ARP Head and Main Studs





Cleaned Pistions with a cheap Harbor Fright ultra sonic cleaner and purple degreaser used new OEM rings





Getting every thing out of the engine bay and ready for paint





Relay box back wiring is long then the car its self













Seler



Base coat



Clear coat color is black Cherry effect









and this is where i sit will post more as i get it done

Last edited by Lost8lives; 02-28-2012 at 03:34 PM..
Lost8lives is offline   Reply With Quote
Sponsored Links
Old 02-28-2012, 02:10 PM   #2
nomoremk2
Zilvia Member
 
Join Date: Sep 2010
Location: South jersey
Age: 31
Posts: 293
Trader Rating: (1)
nomoremk2 is an unknown quantity at this point
Feedback Score: 1 reviews
What the fuck? Why is this in tech? And why are your headlights black? Do you only drive your car in rap videos?
nomoremk2 is offline   Reply With Quote
Old 02-28-2012, 03:16 PM   #3
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by nomoremk2 View Post
What the fuck? Why is this in tech? And why are your headlights black? Do you only drive your car in rap videos?
well i am real sorry my post is not living up to your dreams and expectations
this is my first post and i was(and still am) having a hard time using the site the forum i use the most has a page for "project cars" i did not see that so i guessed. Maybe when i am 22 years old and all grown up i can know everything and criticize everyone just like you. Oh and yes you have not seen my car in the new Jay Z video you should check it out it is full of old POS's with blacked out head lights becouse that is the only place you will see that no one else in the world would do that...thanks
Lost8lives is offline   Reply With Quote
Old 03-02-2012, 04:39 PM   #4
cassa_bx
Leaky Injector
 
cassa_bx's Avatar
 
Join Date: Jan 2009
Location: jersey
Age: 46
Posts: 55
Trader Rating: (0)
cassa_bx is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by nomoremk2 View Post
What the fuck? Why is this in tech? And why are your headlights black? Do you only drive your car in rap videos?
nomoremk2 has what is known as vwvortex withdrawl...lmao....
Every time I see someone doing this swap, I miss my car and am ready to do another. Gl with the build
And finish it......you'll love it when u do....i did.
cassa_bx is offline   Reply With Quote
Old 03-02-2012, 06:23 PM   #5
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Quote:
Originally Posted by cassa_bx View Post
nomoremk2 has what is known as vwvortex withdrawl...lmao....
Every time I see someone doing this swap, I miss my car and am ready to do another. Gl with the build
And finish it......you'll love it when u do....i did.
cassa took me on a test ride when he was selling his vq'd s14 and that shit was monsterous...def do another we need more in nj lol...thanx man that inspired me to finish my swap... I'll hav a thread up soon of my progress but when im almost done (DEF is gona be different from what I've seen on forums so far)...

Lost8lives keep rolling in pix and progress
sexcii-zenki is offline   Reply With Quote
Old 02-28-2012, 04:59 PM   #6
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Nice job bro, wana see the end results...btw whose doing ur harness? If u do it urself post up step by step pix and try 2b as detailed as possible so I kan use as a reference lol...and dnt worry bout them south jerzee katz hating on ur smoked headlightz, like they never seen any out in seaside

Last edited by sexcii-zenki; 02-28-2012 at 06:27 PM..
sexcii-zenki is offline   Reply With Quote
Old 02-28-2012, 05:25 PM   #7
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by sexcii-zenki View Post
Nice job bro, wana see the end results...btw whose doing ur harness? If u do it urself post up step by step pix and try 2b as detailed as possible so I kan use as a reference lol...and dnt worry bout them jerzee katz hating on ur smoked headlightz, like they never seen any out in seaside
Thank you sir I am going to do the wiring myself I have been fallowing Dudewutup's posts on his swap and wiring I will post when I get to it. waiting on heads to come back from machine shop and like most more money for more parts. And don't worry I looked at that guys post and the ones I read where all the same
Lost8lives is offline   Reply With Quote
Old 02-28-2012, 06:31 PM   #8
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Quote:
Originally Posted by Lost8lives View Post
Thank you sir I am going to do the wiring myself I have been fallowing Dudewutup's posts on his swap and wiring I will post when I get to it. waiting on heads to come back from machine shop and like most more money for more parts. And don't worry I looked at that guys post and the ones I read where all the same

I dnt have patience 4 wires, and i kant follow his write-up since its a not a rev up engine i think its different? Idk, but deff put up as much as possible on the harness...
sexcii-zenki is offline   Reply With Quote
Old 02-28-2012, 06:42 PM   #9
slydin240sx
Zilvia Addict
 
Join Date: Apr 2009
Location: Missouri
Posts: 919
Trader Rating: (3)
slydin240sx is an unknown quantity at this point
Feedback Score: 3 reviews
Nice progress! Ignore the haters. It's your car and should be modded to your liking.
slydin240sx is offline   Reply With Quote
Old 02-28-2012, 07:56 PM   #10
nomoremk2
Zilvia Member
 
Join Date: Sep 2010
Location: South jersey
Age: 31
Posts: 293
Trader Rating: (1)
nomoremk2 is an unknown quantity at this point
Feedback Score: 1 reviews
Only half those pics were up earlier. I clicked expecting to see a vq swap and saw an s14 with black headlights. Goodluck with the swap, I've heard the wiring is intense for these.
nomoremk2 is offline   Reply With Quote
Old 02-28-2012, 08:44 PM   #11
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by nomoremk2 View Post
Only half those pics were up earlier. I clicked expecting to see a vq swap and saw an s14 with black headlights. Goodluck with the swap, I've heard the wiring is intense for these.
Thank you getting around the site better my browser kept locking up so was having a hard time....in your defense tho I did smoke the headlights to much I will have to get brighter bulbs or sand that stuff off can see at night
Lost8lives is offline   Reply With Quote
Old 02-28-2012, 08:58 PM   #12
jesse_s13
Nissanaholic!
 
jesse_s13's Avatar
 
Join Date: Aug 2010
Location: Sacramento,CA/Fresno,CA/El Paso,Tx
Posts: 1,829
Trader Rating: (5)
jesse_s13 is an unknown quantity at this point
Feedback Score: 5 reviews
cool swap engine bay looking fresh!

lights are ehh
__________________
jesse_s13 is offline   Reply With Quote
Old 03-13-2012, 06:56 PM   #13
irax
Post Whore!
 
irax's Avatar
 
Join Date: Aug 2003
Location: San Diego
Age: 37
Posts: 4,248
Trader Rating: (4)
irax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfection
Feedback Score: 4 reviews
Send a message via AIM to irax
I like where this is going!
__________________
Drives a BRZ and is building a V6 S12 coupe.
irax is offline   Reply With Quote
Old 03-14-2012, 09:22 AM   #14
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
more

I have been getting parts in i Got my heads back






















this plate on the rear timing cover the gasket was jacked up so I pulled it off
and this i look in the FSM and it says not to remove it i could not find a gasket so i had to make one useing a sheet of gasket maker from autozone i put the plate on the sheet and traced the out side and bolt holes used a paper hole punch for the bolt holes (thank god that was the right size for the holes) then i put it on and hit it with a rubber hammer witch gave me an outline to cut out the inside
Lost8lives is offline   Reply With Quote
Old 03-14-2012, 09:38 AM   #15
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Axis halo 18x8.5 and 18x9.5



i bought a box of 350Z bolts from Nissan unlimited in Houston 832-467-4400
they have an Ebay store they sell used late model Nissan and infiniti parts for a good price.. the box had Flywheel and bellhousing bolts that i needed and i paid less for 25ibs of bolts then nissan wanted for 8 new flywheel bolts
i got my Accel plug from em too



my car was an Automatic i pulled this cut out in the insulation out and the punch marks where there i drilled the bolt holes out and got a 1 3/4 hole cut out tool at lowes it was made for wood but worked well





Steering rack bushings




I ordered lot of other stuff.. i did order the mckenney mount kit i will post how that goes i know other have had problems with fitment

i have started the wiring i will do a wright up on it when i get done and the car starts

i am finally getting to the swap part of the swap
Lost8lives is offline   Reply With Quote
Old 03-14-2012, 12:48 PM   #16
Frank_Jaeger
Zilvia FREAK!
 
Join Date: Jan 2012
Location: Port Charlotte, Florida
Age: 29
Posts: 1,352
Trader Rating: (1)
Frank_Jaeger is an unknown quantity at this point
Feedback Score: 1 reviews
Nice build so far! Keep it up!
Frank_Jaeger is offline   Reply With Quote
Old 04-03-2012, 02:07 PM   #17
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
updates

















My assistant





McKinney VQ35 Mount Kit came in after 3 1/2 weeks and like others dont fit















guess i will hammer the fire wall out to make it fit



chasebays sent the wrong feel line the short one at the top thay are suppost to send me a new one



Lost8lives is offline   Reply With Quote
Old 04-03-2012, 03:37 PM   #18
irax
Post Whore!
 
irax's Avatar
 
Join Date: Aug 2003
Location: San Diego
Age: 37
Posts: 4,248
Trader Rating: (4)
irax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfectionirax is close to perfection
Feedback Score: 4 reviews
Send a message via AIM to irax
you might have the engine brackets flipped

I didn't have mckinney mounts, they didn't make them back then, and my shit sat perfectly thanks to Bardabe
__________________
Drives a BRZ and is building a V6 S12 coupe.
irax is offline   Reply With Quote
Old 04-04-2012, 07:35 AM   #19
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by irax View Post
you might have the engine brackets flipped

I didn't have mckinney mounts, they didn't make them back then, and my shit sat perfectly thanks to Bardabe
good idea but it would push the engine back more with the mounts i have

like rik boellen i mod the firewall and the intake clears i had to bend the brake hard lines to rerount them. but i am back on track. i have every thing to make it start (i hope) so this weekend i hope to fire it up for the first time
Lost8lives is offline   Reply With Quote
Old 04-03-2012, 03:59 PM   #20
rik boellen
Leaky Injector
 
Join Date: Dec 2010
Location: the netherlands
Age: 41
Posts: 115
Trader Rating: (1)
rik boellen is an unknown quantity at this point
Feedback Score: 1 reviews
same promblem to me



i think the have a s14 halfcut to testfit because s13's dont have the bump in it like s14's
rik boellen is offline   Reply With Quote
Old 04-04-2012, 07:28 AM   #21
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by rik boellen View Post
same promblem to me



i think the have a s14 halfcut to testfit because s13's dont have the bump in it like s14's
Yeah I had seen you post on the dudes thread. i do beleave you are right, they test fit it on a S13 half cut then decided that it would fit a S14 as well. I am not that mad about it. It is call modifying some times you just have to mod. more than planned just wish that they would tell you these things and admit that the mounts dont fit the S14 as well.*

*S14 owners may have to mod. there firewall.....see how hard was that
Lost8lives is offline   Reply With Quote
Old 04-04-2012, 08:18 AM   #22
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Are u having hood clearance issues as well?
sexcii-zenki is offline   Reply With Quote
Old 04-04-2012, 10:02 AM   #23
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by sexcii-zenki View Post
Are u having hood clearance issues as well?
I do not know yet looks like i will tho as soon as i test fit the hood i will let you know
Lost8lives is offline   Reply With Quote
Old 06-18-2012, 08:32 PM   #24
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Looking awesome! I like the red and black theme you have with the engine. The smoked headlights looked awful with the original paing, but will look sick with your black cherry paint.

I had the same TB clearence issue on my firewall. nothing a hammer couldn't fix

and sexcii, I did the revup swap. it was just as easy. the only thing I have noticed from the wiring stand point is the two additional sensors on the back of the heads. instead of two, there is now four.
dorrifto is offline   Reply With Quote
Old 06-19-2012, 07:41 AM   #25
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by dorrifto View Post
Looking awesome! I like the red and black theme you have with the engine. The smoked headlights looked awful with the original paing, but will look sick with your black cherry paint.

I had the same TB clearence issue on my firewall. nothing a hammer couldn't fix

and sexcii, I did the revup swap. it was just as easy. the only thing I have noticed from the wiring stand point is the two additional sensors on the back of the heads. instead of two, there is now four.
your car looks good to i have a 2nd block and plan to sleeve and stroke. i just dropped may gas tank to get all the old gas out hope to start it for the first time this weekend
Lost8lives is offline   Reply With Quote
Old 06-19-2012, 10:50 AM   #26
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Ebay

Check this out looks like some one did a knock off of the Mckinny mount kit for 210.00 shipped wish i had not bought my mount kit already. looks like it has solid mounts looks good for 210.00 shipped


240SX S13 S14 SWAP VQ35DE VQ35 350Z G35 ENGINE MOTOR MOUNT BRACKET | eBay
Attached Images
File Type: jpg $(KGrHqV,!psE-zm-pQ!YBP2mS545uQ~~60_12.jpg (39.2 KB, 19 views)
Lost8lives is offline   Reply With Quote
Old 06-20-2012, 07:42 AM   #27
Guilty1s
Zilvia Member
 
Join Date: Sep 2011
Location: Knoxville, TN
Age: 33
Posts: 263
Trader Rating: (1)
Guilty1s is an unknown quantity at this point
Feedback Score: 1 reviews
Thanks for that dude. I just bought some. I'll post a review once I get them and hopefully not to long after I can install them.
Guilty1s is offline   Reply With Quote
Old 06-20-2012, 09:38 AM   #28
Lost8lives
 
Join Date: Feb 2012
Location: Abilene, TX
Age: 39
Posts: 46
Trader Rating: (0)
Lost8lives is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Guilty1s View Post
Thanks for that dude. I just bought some. I'll post a review once I get them and hopefully not to long after I can install them.
yeah let us all know how they look and fit they may fit better then the ones i payed 500.00 for... you working on a S14 or S13?
Lost8lives is offline   Reply With Quote
Old 06-20-2012, 08:31 AM   #29
Guilty1s
Zilvia Member
 
Join Date: Sep 2011
Location: Knoxville, TN
Age: 33
Posts: 263
Trader Rating: (1)
Guilty1s is an unknown quantity at this point
Feedback Score: 1 reviews
And for a cheaper bracket:

https://sites.google.com/a/vq240z.com/www/shiftermount

And tutorial:
https://sites.google.com/a/vq240z.co...fterrelocation
Guilty1s is offline   Reply With Quote
Old 06-22-2012, 03:40 PM   #30
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Guilty1s View Post
Very nice brackets!!!

I got my shifter bracket from zfever and the reverse lockout is non existent. The shifter is in its lowest position all the time. Super annoying. But after looking at these pictures, I think I should be able to weld up a plate on the bottom to solve that problem
dorrifto is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™