2jzgte build with wiring, real cost - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jjsz32racing · 09-22-2011, 07:40 PM

Hey fellas my SR was not enough for me at 420whp so i want to try this, and will try to show u how with the oh so secret wiring lol. thanks any advice is welcome.

This is what i have purchased for the swap.

1. aristo 2j $1460 shipped

2. ebay freddy intake manifold $ 220

3. Rukus knock off mounts $ 180

4. 94 non turbo tranny $ 175 supra forums

5. God speed t4 mani $189

6. koyo radiator already had

7. ebay 50mm wastegate have good experience with this specific one $125

8. wiring 000000

So this was the car before

Got the engine out.

some cleaning of the bay.

after.

and a test fit with the ebay mounts.

found a problem with aftermarket intake manifold gotta beat the brakebooster a little just dont crack it or put a hole in it then it fits great

More updates soon

Prove It · 09-22-2011, 07:44 PM

ummm sweet an halfass 2jz build...do it right brotha

jjsz32racing · 09-22-2011, 07:49 PM

Not half ass, the only stuff thats half ass is wastegate but i have great experience with this specific unit this is my second 2jz build. and intake manifold is coated and cleaned. also welded to lower runners no leaks tested it to 150psi thanks for the advice though trying give people a option thats on a budget.

Flicktitty · 09-22-2011, 07:52 PM

Advice? You want advice...

Ok. SELL THAT N/A 5spd trans (W58) if you had a 420whp sr20 and you are doing a more hp 2JZ you WILL break that trans.

i have heard of people doing a Miata booster inplace of the S-1X booster for intake manifold clearance. Also the stock intake manifold woulda have been good for 700+ HP unless you want it for looks then more power to you.

jjsz32racing · 09-22-2011, 07:56 PM

yeah i broke my last w58 at 470whp with m/t drag radials
but my buddy owns a tranny shap so all the thrust washers have been replaced with titanium.

kalypso123 · 09-22-2011, 07:56 PM

keep going, I want to see how this ends... :0)

jjsz32racing · 09-22-2011, 09:55 PM

update

a t3 looks tiny

now the turbo i got off a international semi garrett gt4088

TrueFreshness · 09-22-2011, 10:00 PM

Where did you buy your 2j from?

jjsz32racing · 09-22-2011, 10:04 PM

japaneseengineimport.com dave he is a pretty straight up guy

blueshark123 · 09-22-2011, 10:13 PM

you could use a manual non abs brake booster which is very slim

TrueFreshness · 09-22-2011, 10:18 PM

I just went to their site and it says the 2j is $2,299

jjsz32racing · 09-22-2011, 10:19 PM

Its non abs. I checked it doesnt have a diaphram as long as you dont puncture it. It will work the same. Yeah i was checkin into other options though for the looks. its kind of last minute to make it to the local drift event.

Imarvin240 · 09-22-2011, 10:36 PM

haha why do you need a turbo that big? the little guy would spool a lot quicker

TrueFreshness · 09-22-2011, 10:44 PM

How did you get it for 1400?

DeeezwasRiceSauce · 09-22-2011, 10:49 PM

you need a front mount intercooler with a RHD feed. chase the air from the opposite side of the engine bay.. and you could gain up to 34hp

jdm2191 · 09-22-2011, 11:11 PM

I want to see how to do the wiring!!

Please shows us JZ People!

DeeezwasRiceSauce · 09-22-2011, 11:22 PM

wiring map from 2jz - sr20 - ka24de lights harness? RB20 ecu, 350z Maf, SR20/RB25de engine bay harness. should run 9.7 voltz. stock cps. But the New R35 GTR Skyline runs this mapping board so the pressure will dump about 8psi unexspected if you have brake light for your guage cluster.. its a brakes heat sensor for the 2 step. it crosses the rev limiter and ignition spark to counter the brake dust-shield removal (no skylines have dust shield anymore)

jdm2191 · 09-22-2011, 11:56 PM

Quote:

Originally Posted by DeeezwasRiceSauce

wiring map from 2jz - sr20 - ka24de lights harness? RB20 ecu, 350z Maf, SR20/RB25de engine bay harness. should run 9.7 voltz. stock cps. But the New R35 GTR Skyline runs this mapping board so the pressure will dump about 8psi unexspected if you have brake light for your guage cluster.. its a brakes heat sensor for the 2 step. it crosses the rev limiter and ignition spark to counter the brake dust-shield removal (no skylines have dust shield anymore)

WTF are u talking about??

jdm2191 · 09-22-2011, 11:58 PM

Quote:

Originally Posted by TrueFreshness

How did you get it for 1400?

Probably because it didnt come with a tranny.... Getrag Trannys are like 3k

DeeezwasRiceSauce · 09-23-2011, 12:03 AM

^ so you don't know what im talking about, and your trying to source a transmission that cost $3000.00 because our cars go for that much.... wow. next your gona say you've never been inside of the skyline but you now how to upgrade performance with a brand new data board.. cause your car never came or heard of the parts i mentioned? next your gona ask for my oil weight numbers and ask me the number to a engine harness company and see if this will work but only tmr after you wake up from your moist dreams... burn

tac 1 · 09-23-2011, 12:07 AM

Quote:

Originally Posted by TrueFreshness

How did you get it for 1400?

Im guessing he came with his own tranny? Idk, womdering as well.

DeeezwasRiceSauce · 09-23-2011, 12:18 AM

re-manufactured ahah... those trannys push intercoolers

jdm2191 · 09-23-2011, 12:26 AM

Quote:

Originally Posted by DeeezwasRiceSauce

^ so you don't know what im talking about, and your trying to source a transmission that cost $3000.00 because our cars go for that much.... wow. next your gona say you've never been inside of the skyline but you now how to upgrade performance with a brand new data board.. cause your car never came or heard of the parts i mentioned? next your gona ask for my oil weight numbers and ask me the number to a engine harness company and see if this will work but only tmr after you wake up from your moist dreams... burn

still dont know what your talking about

GFO Here with your 20 post go to NICO

DeeezwasRiceSauce · 09-23-2011, 12:32 AM

so your cheesing about not knowing what a RB25DE is? you don't know what a $3000.00 tranny would do? you don't know why you would need a 350z maf.. and your telling me to GetFuccOut... are you a flying lizard. yo mike is that you!?!? ahaha race me then with that slow single cam meadow hammer... or does your speed limiter kick in at 155mph... chump

jdm2191 · 09-23-2011, 12:36 AM

Quote:

Originally Posted by DeeezwasRiceSauce

so your cheesing about not knowing what a RB25DE is? you don't know what a $3000.00 tranny would do? you don't know why you would need a 350z maf.. and your telling me to GetFuccOut... are you a flying lizard. yo mike is that you!?!? ahaha race me then with that slow single cam meadow hammer... or does your speed limiter kick in at 155mph... chump

No i dont know or care about a RB25DE NOR do I care about being in a Skyline & YES GETRAG MK4 SUPRA 6 SPEED TRANNYS GO FOR 3000K & i STILL DONT KNOW WHAT YOUR TALKING ABOUT?

Flicktitty · 09-23-2011, 12:38 AM

Hey 2JZGTE Built thread. No need to get off track. god damn noobs.

kalypso123 · 09-23-2011, 05:00 AM

YES PLEASE CONTINUE...

Ok so... RB20 ecu and a 350z MAF - with the r35 mapping right?

alcolade · 09-23-2011, 06:04 AM

Can i have my 10 minutes back. This is useless without the info you were trying to give.

OP please chime in and explain what you are trying to do with your wiring.

thefro526 · 09-23-2011, 06:25 AM

JZ builds are radical.

Though I am a bit concerned with your choice of transmissions. I guess you may or may not prove many of the W58's haters right.

Somewhat related: Do you have to extend all of the ECU wires on the harness like you do with a 1J swap? I sent my harness out, and they extended 50 or so wires about 18" so that I could have my ECU in the right spot.

jjsz32racing · 09-23-2011, 11:21 AM

i got the engine for 1460 shipped beacause it had no tranny and just like a car
lot they may ask one price but if u call and jew them down they will take less.

And for the wiring i got the car running today and im not using non of the sr wiring and it was easy. got everything working but speedo and tach waiting on dakota digital stuff. let me get my pinout up and i will show u. Oh and u only need to extend the wires about 12 inches and seeings how non are sensor related no need to solder. but both connectors will go through the stock location on firewall.

09-22-2011, 07:40 PM	#1
jjsz32racing Leaky Injector Join Date: Feb 2011 Location: georgia Age: 35 Posts: 73 Trader Rating: (1) Feedback Score: 1 reviews	2jzgte build with wiring, real cost Hey fellas my SR was not enough for me at 420whp so i want to try this, and will try to show u how with the oh so secret wiring lol. thanks any advice is welcome. This is what i have purchased for the swap. 1. aristo 2j $1460 shipped 2. ebay freddy intake manifold $ 220 3. Rukus knock off mounts $ 180 4. 94 non turbo tranny $ 175 supra forums 5. God speed t4 mani $189 6. koyo radiator already had 7. ebay 50mm wastegate have good experience with this specific one $125 8. wiring 000000 So this was the car before Got the engine out. some cleaning of the bay. after. and a test fit with the ebay mounts. found a problem with aftermarket intake manifold gotta beat the brakebooster a little just dont crack it or put a hole in it then it fits great More updates soon

09-22-2011, 07:52 PM	#4
Flicktitty Post Whore! Join Date: Apr 2007 Location: Wisconsin Age: 34 Posts: 3,685 Trader Rating: (13) Feedback Score: 13 reviews	Advice? You want advice... Ok. SELL THAT N/A 5spd trans (W58) if you had a 420whp sr20 and you are doing a more hp 2JZ you WILL break that trans. i have heard of people doing a Miata booster inplace of the S-1X booster for intake manifold clearance. Also the stock intake manifold woulda have been good for 700+ HP unless you want it for looks then more power to you. __________________ 2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo

09-22-2011, 10:36 PM	#13
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	haha why do you need a turbo that big? the little guy would spool a lot quicker __________________ https://instagram.com/eck_matthew/

09-22-2011, 11:11 PM	#16
jdm2191 Post Whore! Join Date: Dec 2008 Location: Whittier Age: 30 Posts: 3,717 Trader Rating: (79) Feedback Score: 79 reviews	I want to see how to do the wiring!! Please shows us JZ People! __________________ My Build: The "Coupe De Ville" 1JZ Build!!

09-23-2011, 12:38 AM	#26
Flicktitty Post Whore! Join Date: Apr 2007 Location: Wisconsin Age: 34 Posts: 3,685 Trader Rating: (13) Feedback Score: 13 reviews	Hey 2JZGTE Built thread. No need to get off track. god damn noobs. __________________ 2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo

09-22-2011, 07:44 PM	#2
Prove It Zilvia Member Join Date: Oct 2009 Location: Palm Beach Posts: 230 Trader Rating: (1) Feedback Score: 1 reviews	ummm sweet an halfass 2jz build...do it right brotha

09-22-2011, 07:49 PM	#3
jjsz32racing Leaky Injector Join Date: Feb 2011 Location: georgia Age: 35 Posts: 73 Trader Rating: (1) Feedback Score: 1 reviews	Not half ass, the only stuff thats half ass is wastegate but i have great experience with this specific unit this is my second 2jz build. and intake manifold is coated and cleaned. also welded to lower runners no leaks tested it to 150psi thanks for the advice though trying give people a option thats on a budget.

09-22-2011, 07:56 PM	#5
jjsz32racing Leaky Injector Join Date: Feb 2011 Location: georgia Age: 35 Posts: 73 Trader Rating: (1) Feedback Score: 1 reviews	yeah i broke my last w58 at 470whp with m/t drag radials but my buddy owns a tranny shap so all the thrust washers have been replaced with titanium.

09-22-2011, 07:56 PM	#6
kalypso123 (ノಠ益ಠ)ノ彡 Join Date: Apr 2008 Location: New York, NY Posts: 2,853 Trader Rating: (2) Feedback Score: 2 reviews	keep going, I want to see how this ends... :0)

09-22-2011, 09:55 PM	#7
jjsz32racing Leaky Injector Join Date: Feb 2011 Location: georgia Age: 35 Posts: 73 Trader Rating: (1) Feedback Score: 1 reviews	update a t3 looks tiny now the turbo i got off a international semi garrett gt4088

09-22-2011, 10:00 PM	#8
TrueFreshness Leaky Injector Join Date: Jun 2011 Location: United States Posts: 138 Trader Rating: (0) Feedback Score: 0 reviews	Where did you buy your 2j from?

09-22-2011, 10:04 PM	#9
jjsz32racing Leaky Injector Join Date: Feb 2011 Location: georgia Age: 35 Posts: 73 Trader Rating: (1) Feedback Score: 1 reviews	japaneseengineimport.com dave he is a pretty straight up guy

09-22-2011, 10:13 PM	#10
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	you could use a manual non abs brake booster which is very slim

09-22-2011, 10:18 PM	#11
TrueFreshness Leaky Injector Join Date: Jun 2011 Location: United States Posts: 138 Trader Rating: (0) Feedback Score: 0 reviews	I just went to their site and it says the 2j is $2,299

09-22-2011, 10:19 PM	#12
jjsz32racing Leaky Injector Join Date: Feb 2011 Location: georgia Age: 35 Posts: 73 Trader Rating: (1) Feedback Score: 1 reviews	Its non abs. I checked it doesnt have a diaphram as long as you dont puncture it. It will work the same. Yeah i was checkin into other options though for the looks. its kind of last minute to make it to the local drift event.

09-22-2011, 10:44 PM	#14
TrueFreshness Leaky Injector Join Date: Jun 2011 Location: United States Posts: 138 Trader Rating: (0) Feedback Score: 0 reviews	How did you get it for 1400?

09-22-2011, 10:49 PM	#15
DeeezwasRiceSauce BANNED Join Date: Sep 2011 Location: SF Bay Area Age: 30 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	you need a front mount intercooler with a RHD feed. chase the air from the opposite side of the engine bay.. and you could gain up to 34hp

09-22-2011, 11:22 PM	#17
DeeezwasRiceSauce BANNED Join Date: Sep 2011 Location: SF Bay Area Age: 30 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	wiring map from 2jz - sr20 - ka24de lights harness? RB20 ecu, 350z Maf, SR20/RB25de engine bay harness. should run 9.7 voltz. stock cps. But the New R35 GTR Skyline runs this mapping board so the pressure will dump about 8psi unexspected if you have brake light for your guage cluster.. its a brakes heat sensor for the 2 step. it crosses the rev limiter and ignition spark to counter the brake dust-shield removal (no skylines have dust shield anymore)

09-23-2011, 12:03 AM	#20
DeeezwasRiceSauce BANNED Join Date: Sep 2011 Location: SF Bay Area Age: 30 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	^ so you don't know what im talking about, and your trying to source a transmission that cost $3000.00 because our cars go for that much.... wow. next your gona say you've never been inside of the skyline but you now how to upgrade performance with a brand new data board.. cause your car never came or heard of the parts i mentioned? next your gona ask for my oil weight numbers and ask me the number to a engine harness company and see if this will work but only tmr after you wake up from your moist dreams... burn

09-23-2011, 12:18 AM	#22
DeeezwasRiceSauce BANNED Join Date: Sep 2011 Location: SF Bay Area Age: 30 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	re-manufactured ahah... those trannys push intercoolers

09-23-2011, 12:32 AM	#24
DeeezwasRiceSauce BANNED Join Date: Sep 2011 Location: SF Bay Area Age: 30 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	so your cheesing about not knowing what a RB25DE is? you don't know what a $3000.00 tranny would do? you don't know why you would need a 350z maf.. and your telling me to GetFuccOut... are you a flying lizard. yo mike is that you!?!? ahaha race me then with that slow single cam meadow hammer... or does your speed limiter kick in at 155mph... chump

09-23-2011, 05:00 AM	#27
kalypso123 (ノಠ益ಠ)ノ彡 Join Date: Apr 2008 Location: New York, NY Posts: 2,853 Trader Rating: (2) Feedback Score: 2 reviews	YES PLEASE CONTINUE... Ok so... RB20 ecu and a 350z MAF - with the r35 mapping right?

09-23-2011, 06:04 AM	#28
alcolade Leaky Injector Join Date: Jan 2006 Location: NJ Posts: 112 Trader Rating: (2) Feedback Score: 2 reviews	Can i have my 10 minutes back. This is useless without the info you were trying to give. OP please chime in and explain what you are trying to do with your wiring. __________________ http://allies-drift.blogspot.com/

09-23-2011, 06:25 AM	#29
thefro526 Nissanaholic! Join Date: Feb 2008 Location: New Jersey Posts: 1,813 Trader Rating: (8) Feedback Score: 8 reviews	JZ builds are radical. Though I am a bit concerned with your choice of transmissions. I guess you may or may not prove many of the W58's haters right. Somewhat related: Do you have to extend all of the ECU wires on the harness like you do with a 1J swap? I sent my harness out, and they extended 50 or so wires about 18" so that I could have my ECU in the right spot. __________________ http://thefro526.wordpress.com/ Deto International

09-23-2011, 11:21 AM	#30
jjsz32racing Leaky Injector Join Date: Feb 2011 Location: georgia Age: 35 Posts: 73 Trader Rating: (1) Feedback Score: 1 reviews	i got the engine for 1460 shipped beacause it had no tranny and just like a car lot they may ask one price but if u call and jew them down they will take less. And for the wiring i got the car running today and im not using non of the sr wiring and it was easy. got everything working but speedo and tach waiting on dakota digital stuff. let me get my pinout up and i will show u. Oh and u only need to extend the wires about 12 inches and seeings how non are sensor related no need to solder. but both connectors will go through the stock location on firewall.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode