180sx Headlight Problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

UglyBoi180 · 08-25-2020, 12:43 AM

Hello, Im having an issue with my right headlight where my low beam will not work.

My high beam works and both the high and low beam works on the left side. It is not a bulb as i have replaced it with multiple different bulbs and no luck. It's also not a fuse as all have been tested and work.

Has anyone else had this problem?

Thanks

My! · 08-25-2020, 02:14 AM

check under your fender and see if your harness has been rubbed by your front tires.

S14rebuild · 08-25-2020, 04:13 AM

yes check the harness running under the driver fender. Seen the head light connector corroded , and the wires come off the connector

UglyBoi180 · 10-19-2020, 01:36 AM

Just want to reply with my solution, My indicator stalk was the issue and after replacing fixed all my issues!

08-25-2020, 12:43 AM	#1
UglyBoi180 Join Date: Jun 2020 Location: Australia Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	180sx Headlight Problem Hello, Im having an issue with my right headlight where my low beam will not work. My high beam works and both the high and low beam works on the left side. It is not a bulb as i have replaced it with multiple different bulbs and no luck. It's also not a fuse as all have been tested and work. Has anyone else had this problem? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-25-2020, 02:14 AM	#2
My! Zilvia Member Join Date: Mar 2010 Location: fort worth Posts: 152 Trader Rating: (8) Feedback Score: 8 reviews	check under your fender and see if your harness has been rubbed by your front tires.

08-25-2020, 04:13 AM	#3
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	yes check the harness running under the driver fender. Seen the head light connector corroded , and the wires come off the connector

10-19-2020, 01:36 AM	#4
UglyBoi180 Join Date: Jun 2020 Location: Australia Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Just want to reply with my solution, My indicator stalk was the issue and after replacing fixed all my issues!