LS1 350z Drift Build 'Nuff Said' - Page 11 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Royal_T · 10-07-2011, 08:09 PM

^^ Fa sho bro... And I can't wait for Wurstfest

S14kouki_10 · 10-07-2011, 10:49 PM

sweet is the car still at uprev?

blitzsti22 · 10-08-2011, 12:18 AM

Read from page 1 really like your build, making me want to get a ls1 now

mx597turbo · 10-08-2011, 07:34 AM

Nice build. I didn't read the whole thread, but I can tell you that chip in the balancer would make no difference what-so-ever. We have a pickup with a couple chips in the balancer, and it's been running fine for about 6 years and 150k miles. The belt is ribbed and auto-tensioned - it won't pop off.

What are you setting your redline at? I have a C5 with a LS1 with LS6 heads. I replaced the valve springs with LS3 springs (blue). I have mine set at 6950rpm, with a LS6 single roller cam chain. No problems in 2 years and 30k miles. Unfortunately, the cam dies off around 5500rpm, so I don't really drive above that.

If you're going with double springs, you really should do a double roller timing chain. Sustained high rpm with the extra tension of the heavier springs will definitely put extra stress on the chain. BTW, don't bother with the C5R single chain. You can get a double roller setup, including sprockets and chain for about $80. Check out texas speed. They have good prices and fast service.

Have fun spinning the tires at 2000 rpm

Royal_T · 10-08-2011, 10:49 AM

Quote:

Originally Posted by S14kouki_10

sweet is the car still at uprev?

Yup it is still up there... should be done from there in a week or so

Quote:

Originally Posted by blitzsti22

Read from page 1 really like your build, making me want to get a ls1 now

Thanks bro glad you like.. now go out there and buy you a LS

Quote:

Originally Posted by mx597turbo

Nice build. I didn't read the whole thread, but I can tell you that chip in the balancer would make no difference what-so-ever. We have a pickup with a couple chips in the balancer, and it's been running fine for about 6 years and 150k miles. The belt is ribbed and auto-tensioned - it won't pop off.

What are you setting your redline at? I have a C5 with a LS1 with LS6 heads. I replaced the valve springs with LS3 springs (blue). I have mine set at 6950rpm, with a LS6 single roller cam chain. No problems in 2 years and 30k miles. Unfortunately, the cam dies off around 5500rpm, so I don't really drive above that.

If you're going with double springs, you really should do a double roller timing chain. Sustained high rpm with the extra tension of the heavier springs will definitely put extra stress on the chain. BTW, don't bother with the C5R single chain. You can get a double roller setup, including sprockets and chain for about $80. Check out texas speed. They have good prices and fast service.

Have fun spinning the tires at 2000 rpm

I was not really concern about the chip on the balancer... I already new I was going to replace it so just mentioned it had a chip... But that was not my main reason for replacing it..

As far as what my RPM will be set at. I don't know really at this moment. Also I might replace the LS2 chain with a double roller timing chain but we will see..

Neteru · 10-09-2011, 07:02 AM

subscribed.

disgusting build.

and u drink hella beers, lol.

scottie · 10-09-2011, 07:53 AM

Quote:

Originally Posted by mx597turbo

If you're going with double springs, you really should do a double roller timing chain. Sustained high rpm with the extra tension of the heavier springs will definitely put extra stress on the chain. BTW, don't bother with the C5R single chain. You can get a double roller setup, including sprockets and chain for about $80. Check out texas speed. They have good prices and fast service.

In an ideal world yes you would want to use a double roller setup. However the C5R has been a proven chain hence why I went with it. But the main reason is the Melling HP oil pump will NOT allow a double rolled. For me personally I am concerned more with oil (Sikky pan, Melling pump & 3qt Accusump). I plan to run a conservative redline. Just knowing the notorious issues of oil starvation with these motors in circuit racing and drifting I didnt want to take chances.

Great build so far. Reminds me of my build posts in the past where I would include different beers with pics. If you like dark and/or flavor I stumbled on this combo:
Youngs Double Chocolate Stout & Wells Banana Bread. 3:1 ratio as the banana is stronger. It's like a banana split that looks like a Guinness.

Royal_T · 10-09-2011, 11:43 AM

^^ I agree with you on the oil concern, taking the similar precisions..

As for the Youngs Double Chocolate Stout,, I have been meaning to pick some up, heard it was good, so now I will def do that..

Update later today guys

silver04rsx · 10-09-2011, 11:59 AM

Excited to see how your tube front end turned out. I love when they are done correctly.

sterlinge · 10-09-2011, 05:17 PM

Nice build. I think I saw your 350 a few months ago in stone oak. clean bro...

Royal_T · 10-09-2011, 06:22 PM

^^ I don't think that was me, since my car has been down for more then 2 months but then again I do have a lot of copy cats in SA...lol

STAGE 4: Phase 2 '"More tube chassis work"'

Okay guys it's that time again.. Now I tried to plan for my weekly updates to be about a month behind where I am actually at, but it seems like that is not going to be the case anymore.. With that being said the next weeks post should be only a week behind me and might catch up to me, if that is the case I will still try to update every week with something..

Okay let's jump into it.. I decided this week I would show case one of the beers I like from my local spot. Its from BJs Restaurant & BrewHouse, they always have there in house season beer on tap and man oh man are they good. This one is there White Beer that taste amazing,,

Okay we are trying to finish up the front tube chassis. And Russell is working on the ducting for the Radiator.

I think it is turning out pretty damn sick if you ask me..

Also sorry for all the cell phone pic, I accidentally left my camera at home so had to use my I-phone.. So sorry for the crappy pics..

Closer look at ducting... yup that is a broom,,lol

Here are the new bumper brackets...

Also I decided to remove that damn ABS system completely. Going to run all new brake line and run lines to my new ASD hydro..

Also started working on removing all the OEM harness and dash.

And let me just say all that harness and extra brackets weighed a lot. I swear all the OEM harness weighs about 40lbs..

Also got rid of all the damn metal behind the seat that used to hold the speakers and cubby holes. And man was that some extra weight I did not need, that was another 30-40lbs.

And why I'm I getting rid of all this stuff you ask?

Getting ready to have my full custom FD Spec cage installed...

Its going to be one intense cage and I just can't wait to have this finished up..

Okay that is it for now, sorry for so little pics but like I said forgot my damn camera. Also the post are going to be kind of random from now, jumping from front tube chassis and cage work.

Hope you guys like..

Next week STAGE 4: Phase 3 '"Cage work and a little tube chassis work"'

sterlinge · 10-09-2011, 06:29 PM

It was about 4 months ago I guess it was on the rotiforms....

Royal_T · 10-09-2011, 06:30 PM

^^ yea prb was me then

sterlinge · 10-09-2011, 06:35 PM

My bro has a tt 350 he lives on real close to stone oak. Should get some beers if you ever go drink.

thefro526 · 10-09-2011, 06:53 PM

Royal_T is king of both beer and the Z33.

Well done.

project-D180 · 10-09-2011, 07:03 PM

niice...ill a$$ build bro

thenooblet · 10-09-2011, 07:17 PM

Do you have an expected finish date?

What size tires do you plan on running with those enormous 13" wide wheels?

Where do you plan on getting it tuned?

StReeTz · 10-09-2011, 07:52 PM

Looking good Edafe! The radiator looks beast in there! Goodluck on the rest of the build!

*s13 @ fullboost* · 10-09-2011, 08:11 PM

I love how organized this thread is awesome work keep it up and thumbs up for blue moon!

Royal_T · 10-09-2011, 08:12 PM

Quote:

Originally Posted by sterlinge

My bro has a tt 350 he lives on real close to stone oak. Should get some beers if you ever go drink.

Nice, when ever I am always down to grab some beers.

Quote:

Originally Posted by thefro526

Royal_T is king of both beer and the Z33.

Well done.

LOL Thanks bro for the kind words...

Quote:

Originally Posted by thenooblet

Do you have an expected finish date?

What size tires do you plan on running with those enormous 13" wide wheels?

Where do you plan on getting it tuned?

Well I can say I have a date I want the car done around but, with any build things pop up. So it will be done when it is done. Really want it done before the new drift season so I can do a couple of test days and then hit up every event I can in TX.. But we will see..

As for the tires on this 19x13 set up I plan to run either a 305 or a 295.. On my drift setup 18x12 I plan to run either a 275 or 265..

And I Plan on getting my car tuned in Dallas after Stew finishes up the wiring, forgot the name of the place... But he tunes all LS motors..

Quote:

Originally Posted by StReeTz

Looking good Edafe! The radiator looks beast in there! Goodluck on the rest of the build!

Thanks bro,, but the Radiator is not in any of those pics.. I will have pics of that later..

Corbic · 10-09-2011, 08:19 PM

I'm voting this the best build of 2011.

StReeTz · 10-09-2011, 08:44 PM

Quote:

Originally Posted by Royal_T

Thanks bro,, but the Radiator is not in any of those pics.. I will have pics of that later..

Haha, silly me, the top of the ducting looked just like a radiator.

tricky_ab · 10-09-2011, 10:24 PM

Man I'm hyped for the cage install (and this build in general)...Thanks for the updates

misterdumby · 10-09-2011, 10:34 PM

this build just keeps getting more ridiculous

NismoTuner21 · 10-10-2011, 06:48 AM

Quote:

Originally Posted by Royal_T

And I Plan on getting my car tuned in Dallas after Stew finishes up the wiring, forgot the name of the place... But he tunes all LS motors..

Ahh you're the buddy Stew is doing the wiring for? lol Car is looking extra dope man. Can't wait to see more progress!

Royal_T · 10-10-2011, 08:32 AM

Quote:

Originally Posted by Corbic

I'm voting this the best build of 2011.

If there was such a thing... Thanks

Quote:

Originally Posted by StReeTz

Haha, silly me, the top of the ducting looked just like a radiator.

Man when Russell sent me that pic, I also thought the same thing.. But its just the ducting.. Rad is going to set nicely in there.

Quote:

Originally Posted by tricky_ab

Man I'm hyped for the cage install (and this build in general)...Thanks for the updates

Man just wait until you see the cage work.. blew my mind.. And thanks for the kind words

Quote:

Originally Posted by misterdumby

this build just keeps getting more ridiculous

Thanks bro

Quote:

Originally Posted by NismoTuner21

Ahh you're the buddy Stew is doing the wiring for? lol Car is looking extra dope man. Can't wait to see more progress!

Well I know Stew is working on a wiring job soon on someone elses ride. So it might be that guy he is talking about.. But yup he is doing mine when its ready..

conrad_s13.5 · 10-10-2011, 08:51 AM

should be awesome!
cant wait to see you drive it!

Have you had much seat time drifting or just jumping in the ocean?
(excuse my lack of knowledge on you/this cars history)

Royal_T · 10-10-2011, 08:55 AM

Quote:

Originally Posted by conrad_s13.5

should be awesome!
cant wait to see you drive it!

Have you had much seat time drifting or just jumping in the ocean?
(excuse my lack of knowledge on you/this cars history)

No its all good, I have had some seat time when I was N/A but not as much as I would like. But its good I have some great drivers around me to help me get better....lol

conrad_s13.5 · 10-11-2011, 11:48 AM

best way to do it!....lol

hellz yeah!

ROIDMONKEY · 10-14-2011, 09:48 PM

wow Royal amazing dude.. from stretching/flush to this .. never ends lol .. awesome built

10-07-2011, 08:09 PM	#301
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 38 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	^^ Fa sho bro... And I can't wait for Wurstfest __________________ http://zilvia.net/advertise.html

10-08-2011, 12:18 AM	#303
blitzsti22 Zilvia Addict Join Date: Mar 2008 Location: 626socal Age: 32 Posts: 805 Trader Rating: (5) Feedback Score: 5 reviews	Read from page 1 really like your build, making me want to get a ls1 now __________________

10-09-2011, 07:02 AM	#306
Neteru Zilvia Member Join Date: Dec 2009 Location: Orlando Posts: 225 Trader Rating: (1) Feedback Score: 1 reviews	subscribed. disgusting build. and u drink hella beers, lol. __________________ //ucf20\\

10-09-2011, 11:43 AM	#308
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 38 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	^^ I agree with you on the oil concern, taking the similar precisions.. As for the Youngs Double Chocolate Stout,, I have been meaning to pick some up, heard it was good, so now I will def do that.. Update later today guys __________________ http://zilvia.net/advertise.html

10-09-2011, 06:22 PM	#311
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 38 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	^^ I don't think that was me, since my car has been down for more then 2 months but then again I do have a lot of copy cats in SA...lol STAGE 4: Phase 2 '"More tube chassis work"' Okay guys it's that time again.. Now I tried to plan for my weekly updates to be about a month behind where I am actually at, but it seems like that is not going to be the case anymore.. With that being said the next weeks post should be only a week behind me and might catch up to me, if that is the case I will still try to update every week with something.. Okay let's jump into it.. I decided this week I would show case one of the beers I like from my local spot. Its from BJs Restaurant & BrewHouse, they always have there in house season beer on tap and man oh man are they good. This one is there White Beer that taste amazing,, Okay we are trying to finish up the front tube chassis. And Russell is working on the ducting for the Radiator. I think it is turning out pretty damn sick if you ask me.. Also sorry for all the cell phone pic, I accidentally left my camera at home so had to use my I-phone.. So sorry for the crappy pics.. Closer look at ducting... yup that is a broom,,lol Here are the new bumper brackets... Also I decided to remove that damn ABS system completely. Going to run all new brake line and run lines to my new ASD hydro.. Also started working on removing all the OEM harness and dash. And let me just say all that harness and extra brackets weighed a lot. I swear all the OEM harness weighs about 40lbs.. Also got rid of all the damn metal behind the seat that used to hold the speakers and cubby holes. And man was that some extra weight I did not need, that was another 30-40lbs. And why I'm I getting rid of all this stuff you ask? Getting ready to have my full custom FD Spec cage installed... Its going to be one intense cage and I just can't wait to have this finished up.. Okay that is it for now, sorry for so little pics but like I said forgot my damn camera. Also the post are going to be kind of random from now, jumping from front tube chassis and cage work. Hope you guys like.. Next week STAGE 4: Phase 3 '"Cage work and a little tube chassis work"' __________________ http://zilvia.net/advertise.html

10-07-2011, 10:49 PM	#302
S14kouki_10 Zilvia Addict Join Date: Apr 2010 Location: TX Age: 30 Posts: 658 Trader Rating: (7) Feedback Score: 7 reviews	sweet is the car still at uprev?

10-08-2011, 07:34 AM	#304
mx597turbo Join Date: Oct 2011 Location: NJ Age: 40 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	Nice build. I didn't read the whole thread, but I can tell you that chip in the balancer would make no difference what-so-ever. We have a pickup with a couple chips in the balancer, and it's been running fine for about 6 years and 150k miles. The belt is ribbed and auto-tensioned - it won't pop off. What are you setting your redline at? I have a C5 with a LS1 with LS6 heads. I replaced the valve springs with LS3 springs (blue). I have mine set at 6950rpm, with a LS6 single roller cam chain. No problems in 2 years and 30k miles. Unfortunately, the cam dies off around 5500rpm, so I don't really drive above that. If you're going with double springs, you really should do a double roller timing chain. Sustained high rpm with the extra tension of the heavier springs will definitely put extra stress on the chain. BTW, don't bother with the C5R single chain. You can get a double roller setup, including sprockets and chain for about $80. Check out texas speed. They have good prices and fast service. Have fun spinning the tires at 2000 rpm

10-09-2011, 11:59 AM	#309
silver04rsx Leaky Injector Join Date: Jun 2007 Location: Charlotte, NC Age: 33 Posts: 100 Trader Rating: (5) Feedback Score: 5 reviews	Excited to see how your tube front end turned out. I love when they are done correctly.

10-09-2011, 05:17 PM	#310
sterlinge Zilvia Addict Join Date: Apr 2008 Location: Austin, TX Age: 31 Posts: 857 Trader Rating: (15) Feedback Score: 15 reviews	Nice build. I think I saw your 350 a few months ago in stone oak. clean bro...

10-09-2011, 06:29 PM	#312
sterlinge Zilvia Addict Join Date: Apr 2008 Location: Austin, TX Age: 31 Posts: 857 Trader Rating: (15) Feedback Score: 15 reviews	It was about 4 months ago I guess it was on the rotiforms....

10-09-2011, 06:30 PM	#313
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 38 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	^^ yea prb was me then __________________ http://zilvia.net/advertise.html

10-09-2011, 06:35 PM	#314
sterlinge Zilvia Addict Join Date: Apr 2008 Location: Austin, TX Age: 31 Posts: 857 Trader Rating: (15) Feedback Score: 15 reviews	My bro has a tt 350 he lives on real close to stone oak. Should get some beers if you ever go drink.

10-09-2011, 06:53 PM	#315
thefro526 Nissanaholic! Join Date: Feb 2008 Location: New Jersey Posts: 1,813 Trader Rating: (8) Feedback Score: 8 reviews	Royal_T is king of both beer and the Z33. Well done. __________________ http://thefro526.wordpress.com/ Deto International

10-09-2011, 07:03 PM	#316
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	niice...ill a$$ build bro

10-09-2011, 07:52 PM	#318
StReeTz Zilvia Member Join Date: Dec 2010 Location: New York Posts: 280 Trader Rating: (16) Feedback Score: 16 reviews	Looking good Edafe! The radiator looks beast in there! Goodluck on the rest of the build! __________________

10-09-2011, 08:11 PM	#319
s13 @ fullboost Spirit Of Ecstasy Join Date: Dec 2007 Location: Simi Valley, CA Posts: 2,531 Trader Rating: (15) Feedback Score: 15 reviews	I love how organized this thread is awesome work keep it up and thumbs up for blue moon! __________________

10-09-2011, 08:19 PM	#321
Corbic Post Whore! Join Date: Jul 2005 Location: US Age: 37 Posts: 8,027 Trader Rating: (8) Feedback Score: 8 reviews	I'm voting this the best build of 2011.

10-09-2011, 10:24 PM	#323
tricky_ab Post Whore! Join Date: Sep 2008 Location: It's dark, and hell is hot! Posts: 9,413 Trader Rating: (23) Feedback Score: 23 reviews	Man I'm hyped for the cage install (and this build in general)...Thanks for the updates

10-09-2011, 10:34 PM	#324
misterdumby Zilvia Member Join Date: Mar 2011 Location: memphis Posts: 166 Trader Rating: (4) Feedback Score: 4 reviews	this build just keeps getting more ridiculous

10-10-2011, 08:51 AM	#327
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 34 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	should be awesome! cant wait to see you drive it! Have you had much seat time drifting or just jumping in the ocean? (excuse my lack of knowledge on you/this cars history) __________________ cONtRol FReAkS

10-11-2011, 11:48 AM	#329
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 34 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	best way to do it!....lol hellz yeah! __________________ cONtRol FReAkS

10-14-2011, 09:48 PM	#330
ROIDMONKEY Nissanaholic! Join Date: Jul 2007 Location: HollyFLORIDA Posts: 2,027 Trader Rating: (4) Rides Gallery: ROIDMONKEY Feedback Score: 4 reviews	wow Royal amazing dude.. from stretching/flush to this .. never ends lol .. awesome built __________________ TRUE thing: True ////OFFSET\\\\ is acheived without spacers Running on E85 570whp Precision 5862....laggy as fuck. hate it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode