42 offset 18 rim is what is reccommended.. sound right to you? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Brentbohn · 11-10-2008, 06:11 AM

have a 95 base model and looking at some 18x7.5 rims that have 42 offset... is this correct?

mikez97 · 11-10-2008, 06:12 AM

for a miata

slutz4 · 11-16-2008, 07:27 AM

Quote:

Originally Posted by mikez97

for a miata

um no?

Brentbohn · 11-10-2008, 06:16 AM

ok so they will not fit, or is this your way of saying they wont be flush

mikez97 · 11-10-2008, 06:18 AM

they will not be flush
you need much lower to be flush

cc4usmc · 11-10-2008, 06:23 AM

http://zilvia.net/f/chat/129865-whee...re-thread.html

Brentbohn · 11-10-2008, 06:40 AM

so any pics of a 18 with 42 offset on a s14? going to buy today unless convinced otherwise

*ziptiedae86* · 11-10-2008, 07:01 AM

2 people have already told you NO THEY WILL NOT BE FLUSH, you just aren't listening.

Look at the Wheel Whore thread previously posted and see what specs you like.

I am running 18x10s +32 in the rear (much wider and lower offset than what you're going to waste your money on) and my rears aren't perfectly flush. I would need to roll my fenders and get a 10mm spacer to make it flush.

Brentbohn · 11-10-2008, 07:07 AM

what are u running up front

*fliprayzin240sx* · 11-10-2008, 07:10 AM

18x7.5 +42? Yah itll be flush....

on an ACCORD!!!

gotspins13 · 11-28-2008, 02:48 AM

Quote:

Originally Posted by fliprayzin240sx

18x7.5 +42? Yah itll be flush....

on an ACCORD!!!

haha! that penis joke doesnt work on a key board haha bacause A and Z and right next to each other, good try though =]

Brentbohn · 11-10-2008, 07:13 AM

why does tirerack say 42 offset for s14

aznpoopy · 11-10-2008, 07:34 AM

Quote:

Originally Posted by Brentbohn

why does tirerack say 42 offset for s14

are you serious? because tirerack doesn't recommend super aggressive fitment that requires suspension modifications, fender modifications and stretched tires.

a 7.5" +42mm is going to look like shit. go browse the wheel fitment thread.

*fliprayzin240sx* · 11-10-2008, 07:44 AM

Quote:

Originally Posted by Brentbohn

why does tirerack say 42 offset for s14

Because theyre fucking stupid?!?! Like already stated for the 489579485938th time...go look in the wheel thread and take your picking. If you dont, then fuck it, go enjoy your sunken ass fitting wheels and dont bitch at us when it looks like shit.

Your car, your money, your decision.

projectRDM · 11-10-2008, 08:25 AM

Quote:

Originally Posted by Brentbohn

why does tirerack say 42 offset for s14

Tirerack uses a guide book that does not take into account anything other than an OE fitment. Simple. They want the car to remain as close to stock as possible to eliminate possibility of clearance issues. For example if your car had coilovers, those wheels wouldn't come close to fitting.

After all this time of people showing off the correct sizes/offsets, you should know better than to follow anything but that. Search this forum and realize that what you want is at least an 18x9, +20.

98s14inaz · 11-10-2008, 07:48 AM

Quote:

Originally Posted by Brentbohn

have a 95 base model and looking at some 18x7.5 rims that have 42 offset... is this correct?

That size and offset is weak. You'll buy them, install them, be ridiculed by your peers, try to sell them for half of what you paid for them, then buy the right wheel. Save your money, by the right wheels the first time.

mr_kill_666 · 11-10-2008, 02:34 PM

people let him get the wheels, like he said he wants us to convince him. pssssh its ur lame s14 so YOU decide on how u want it to look. and if your avatar is a pic of ur car than i would have to say poor zenki!

.......
damn i cant let the poor zenki suffer, go buy some cheap sportmax 006.
front: 225/40r18 federals 595 on sportmax 006 8.5x18" +35 ( add a 15 or 20 mm spacer for fitment.)
rear: 235/40r18 federals 595 on sportmax 006 9.5x18" +35 ( add a 10 or 15 mm spacer for flushness look)

tires: under 400 shipped
wheels: under 670 shipped
spacers: 100 a pair
tuner lugs: 40 shipped

actual love for your s14.... priceless!!

Brentbohn · 11-10-2008, 08:10 PM

cant i run 25 mm spacers and still be lookin good with 42

aznpoopy · 11-11-2008, 07:59 AM

#1 no, that fitment (7.5 +17mm) still sucks

#2 even if you did get it flush (with a 50+mm spacer), flush 7.5 wheels look stupid because they are too narrow

Ineedparts · 11-11-2008, 11:15 AM

You can run spacers to make it look good. If you found some wheels that you love then get them, you can use spacers to make them sit more flush.

*fliprayzin240sx* · 11-12-2008, 11:08 AM

If your gonna spend money on rims, why dont you do it right and buy something that would actually look good on the car without fucking spacers? Spacers are stupid because its another piece on a car that can fucking fail and break. Get the right size and stop fucking around with dumb shit.

PS: I got a feeling you're pretty much assed out because you already bought ubber gay rims with these sizings...

Maiku240sxS14 · 11-12-2008, 02:55 PM

^ I'm with him...why waste money?! do it right the first time!

BoostedCoupe · 11-12-2008, 03:12 PM

7.5 +42 = FAIL!!! simple 240 math

mikez97 · 11-16-2008, 07:30 AM

i stand corrected, i iz sorry.

but what is the offset?
and wheel specs?

chad b. · 11-27-2008, 11:42 PM

To my knowledge, the largest wheel/tire that you can properly run on an s14 in the rear is a 9.5" width, +38 with a 275/40. This is a 17" setup. For the front, I would run an 8.5" width with a 22-25 offset. This is a PROPER setup meaning the tire AND wheel are in the fender well with just enough clearance for coilovers.

eek · 11-28-2008, 01:07 AM

Quote:

Originally Posted by chad b.

To my knowledge, the largest wheel/tire that you can properly run on an s14 in the rear is a 9.5" width, +38 with a 275/40. This is a 17" setup. For the front, I would run an 8.5" width with a 22-25 offset. This is a PROPER setup meaning the tire AND wheel are in the fender well with just enough clearance for coilovers.

LOL, obviously your knowledge is very small and limited. That is not the largest rim/tire combo you can run. GSRACER has already squeezed in way larger than that on his old stock body s14.

Like above, you might want to check this out. http://zilvia.net/f/chat/129865-whee...re-thread.html

chad b. · 11-28-2008, 09:10 AM

Quote:

Originally Posted by eek

LOL, obviously your knowledge is very small and limited. That is not the largest rim/tire combo you can run. GSRACER has already squeezed in way larger than that on his old stock body s14.

Like above, you might want to check this out. http://zilvia.net/f/chat/129865-whee...re-thread.html

Yea, and here is your boy GSRACERS quote about his car. Try again smart ass.

"20 by 11+ 30 with the first pull on 305-25-20's with some camber. I have since pulled the rears an additional 15mm"

eek · 11-28-2008, 05:09 PM

Quote:

Originally Posted by chad b.

Yea, and here is your boy GSRACERS quote about his car. Try again smart ass.

"20 by 11+ 30 with the first pull on 305-25-20's with some camber. I have since pulled the rears an additional 15mm"

Your a TOOL.

work meister s1

18 by 10 +18
18 by 11 +18

275 fronts
305 rears

stock fenders and quarters

That's what he's runing and been running. Till he threw a widebody on it and coverted it to a kouki not to long ago. Anyhow, the 20's was for fun. He's not my boy, but I do respect the guy. You never said anything about rolling fenders, or stretching them, your exact words are "This is a PROPER setup meaning the tire AND wheel are in the fender well with just enough clearance for coilovers." There are plenty of people on this fourm that run way bigger rims with lower offsets on STOCK BODY cars that go by your standards of being "PROPER".

Pank · 11-28-2008, 11:37 AM

Quote:

Originally Posted by chad b.

To my knowledge, the largest wheel/tire that you can properly run on an s14 in the rear is a 9.5" width, +38 with a 275/40. This is a 17" setup. For the front, I would run an 8.5" width with a 22-25 offset. This is a PROPER setup meaning the tire AND wheel are in the fender well with just enough clearance for coilovers.

so you can roll the fender and still have it be in the fender well. you can also run camber and have it be in the fender well.

"proper" doesn't mean anything

Quote:

Originally Posted by gotspins13

haha! that penis joke doesnt work on a key board haha bacause A and Z and right next to each other, good try though =]

that is the fucking point of the joke

projectRDM · 11-28-2008, 02:51 PM

Quote:

Originally Posted by chad b.

To my knowledge, the largest wheel/tire that you can properly run on an s14 in the rear is a 9.5" width, +38 with a 275/40. This is a 17" setup. For the front, I would run an 8.5" width with a 22-25 offset. This is a PROPER setup meaning the tire AND wheel are in the fender well with just enough clearance for coilovers.

Your 'knowledge' is horrible. Proper means flush, a 9.5", +38 is anything but flush, maybe you meant to say +18 or +8.

11-10-2008, 07:01 AM	#8
ziptiedae86 Premium Member Join Date: May 2006 Location: Austin Age: 37 Posts: 179 Trader Rating: (2) Feedback Score: 2 reviews	2 people have already told you NO THEY WILL NOT BE FLUSH, you just aren't listening. Look at the Wheel Whore thread previously posted and see what specs you like. I am running 18x10s +32 in the rear (much wider and lower offset than what you're going to waste your money on) and my rears aren't perfectly flush. I would need to roll my fenders and get a 10mm spacer to make it flush. Last edited by ziptiedae86; 11-28-2008 at 08:25 AM..

11-10-2008, 07:10 AM	#10
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	18x7.5 +42? Yah itll be flush.... on an ACCORD!!! __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

11-12-2008, 11:08 AM	#21
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	If your gonna spend money on rims, why dont you do it right and buy something that would actually look good on the car without fucking spacers? Spacers are stupid because its another piece on a car that can fucking fail and break. Get the right size and stop fucking around with dumb shit. PS: I got a feeling you're pretty much assed out because you already bought ubber gay rims with these sizings... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

11-12-2008, 03:12 PM	#23
BoostedCoupe Zilvia FREAK! Join Date: Nov 2006 Location: South Fulton, TN Age: 31 Posts: 1,043 Trader Rating: (4) Feedback Score: 4 reviews	7.5 +42 = FAIL!!! simple 240 math __________________ 92 vert converted 5speed and other little things

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-10-2008, 06:11 AM	#1
Brentbohn Zilvia Junkie Join Date: Feb 2007 Location: minnesota Age: 41 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	42 offset 18 rim is what is reccommended.. sound right to you? have a 95 base model and looking at some 18x7.5 rims that have 42 offset... is this correct?

11-10-2008, 06:12 AM	#2
mikez97 Leaky Injector Join Date: Jun 2008 Location: florida Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	for a miata

11-10-2008, 06:16 AM	#4
Brentbohn Zilvia Junkie Join Date: Feb 2007 Location: minnesota Age: 41 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	ok so they will not fit, or is this your way of saying they wont be flush

11-10-2008, 06:18 AM	#5
mikez97 Leaky Injector Join Date: Jun 2008 Location: florida Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	they will not be flush you need much lower to be flush

11-10-2008, 06:40 AM	#7
Brentbohn Zilvia Junkie Join Date: Feb 2007 Location: minnesota Age: 41 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	so any pics of a 18 with 42 offset on a s14? going to buy today unless convinced otherwise

11-10-2008, 07:07 AM	#9
Brentbohn Zilvia Junkie Join Date: Feb 2007 Location: minnesota Age: 41 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	what are u running up front

11-10-2008, 07:13 AM	#12
Brentbohn Zilvia Junkie Join Date: Feb 2007 Location: minnesota Age: 41 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	why does tirerack say 42 offset for s14

11-10-2008, 02:34 PM	#17
mr_kill_666 Leaky Injector Join Date: Oct 2005 Location: dallas, texas Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	people let him get the wheels, like he said he wants us to convince him. pssssh its ur lame s14 so YOU decide on how u want it to look. and if your avatar is a pic of ur car than i would have to say poor zenki! ....... damn i cant let the poor zenki suffer, go buy some cheap sportmax 006. front: 225/40r18 federals 595 on sportmax 006 8.5x18" +35 ( add a 15 or 20 mm spacer for fitment.) rear: 235/40r18 federals 595 on sportmax 006 9.5x18" +35 ( add a 10 or 15 mm spacer for flushness look) tires: under 400 shipped wheels: under 670 shipped spacers: 100 a pair tuner lugs: 40 shipped actual love for your s14.... priceless!!

11-10-2008, 08:10 PM	#18
Brentbohn Zilvia Junkie Join Date: Feb 2007 Location: minnesota Age: 41 Posts: 357 Trader Rating: (4) Feedback Score: 4 reviews	cant i run 25 mm spacers and still be lookin good with 42

11-11-2008, 07:59 AM	#19
aznpoopy Post Whore! Join Date: Mar 2003 Location: New Jersey Age: 40 Posts: 5,013 Trader Rating: (1) Feedback Score: 1 reviews	#1 no, that fitment (7.5 +17mm) still sucks #2 even if you did get it flush (with a 50+mm spacer), flush 7.5 wheels look stupid because they are too narrow

11-11-2008, 11:15 AM	#20
Ineedparts Zilvia Junkie Join Date: Jan 2008 Location: Wichita Ks Age: 34 Posts: 449 Trader Rating: (8) Feedback Score: 8 reviews	You can run spacers to make it look good. If you found some wheels that you love then get them, you can use spacers to make them sit more flush.

11-12-2008, 02:55 PM	#22
Maiku240sxS14 Nissanaholic! Join Date: Jul 2007 Location: LA Posts: 2,019 Trader Rating: (37) Feedback Score: 37 reviews	^ I'm with him...why waste money?! do it right the first time!

11-16-2008, 07:30 AM	#24
mikez97 Leaky Injector Join Date: Jun 2008 Location: florida Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	i stand corrected, i iz sorry. but what is the offset? and wheel specs?

11-27-2008, 11:42 PM	#25
chad b. Join Date: Nov 2008 Location: Mobile, AL Age: 41 Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	To my knowledge, the largest wheel/tire that you can properly run on an s14 in the rear is a 9.5" width, +38 with a 275/40. This is a 17" setup. For the front, I would run an 8.5" width with a 22-25 offset. This is a PROPER setup meaning the tire AND wheel are in the fender well with just enough clearance for coilovers.