How To: LED tail lights - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

HyperTek · 01-29-2008, 08:53 PM

This is a copy*paste from my rx7 forum write ups.. unfortinutly some people liked it, some people did not because of street legal reasons :ghey:

So i will say this is "for off road or show only"

Did this to my FC, supposibly the only one to do this in the US besides Sexy Knights FC

Its pretty much standard im sure it can be done to S13 kouki tails.
Pics are self explanatory.
Heat up tails at about 250 degrees in oven for a few minutes to get them warm to where the glue is easily plyable. Take them apart.

I came up with the idea to throw some aluminum sheeting on the corner blinker, since looking at it with the lense one that it wouldnt really be visble much from the side..

Rip apart the tail lights
I used liquid electrical tape to cover the inside leds, this basically blocks the visible light from them, resulting in a "halo" effect.

Glue setting *adhesive sealant* Gotta put the lense back on and solder up the harness *wiring stuff is pretty easy

Swapping to LED turn signals will result in fast blinkers, so the solution is simple.
About 5 bucks for 2x 8ohm 20watt resistors from radio shack.. Note these are known to get warm/hot if you have your turn signals on for extended time so mount them somewhere safe.. Figure this should work, i doubt this would get flaming hot.. tested it a few minutes in my hand before making the mount. Turn signals back to normal speeds

Finalized

and heres a cute little video teeheh
[ame]http://youtube.com/watch?v=YD97GuTqetI[/ame]

HyperTek · 01-29-2008, 08:54 PM

opps i posted this in wrong section.. mod please move to premie project lol

im a premie newbe

LB.Motoring · 01-29-2008, 08:57 PM

Id love to see a set of kouki 180sx TailS!!!

you should do it for someone hahah.

let me ask/.

Xandy Boosts · 01-29-2008, 09:04 PM

Where'd you get those circle lights from? Or what's the keyword to search on google

k's_silvia2.0 · 01-29-2008, 09:06 PM

Where is that alley? I seen your pic of the e39 there Robby now tell me.

LB.Motoring · 01-29-2008, 09:07 PM

Secret Un-disclosed spot,

Let me and Austie drift at your spot(the furnitureparkinglot), and we'll make it happen.

k's_silvia2.0 · 01-29-2008, 09:08 PM

^You bastard. Well then I guees ill just get it out of you @ the VRT party when your all sauced up.

LB.Motoring · 01-29-2008, 09:09 PM

haha you didnt read the secret message?

Im never saucy, unless your a girl.

k's_silvia2.0 · 01-29-2008, 09:15 PM

Quote:

Originally Posted by LB.Motoring

haha you didnt read the secret message?

Im never saucy, unless your a girl.

Well then ill just have to bring a few huh?

Jung918 · 01-29-2008, 09:10 PM

watching that video felt like i was at a rave.

Found this thread on ziptied. It has a lot of useful information on a custom led setup.

http://www.ziptied.com/forums/index.php?topic=14205.0

PoorMans180SX · 01-29-2008, 09:25 PM

yeah, where'd you get the LED circles?

Looks sick btw.

HyperTek · 01-29-2008, 09:26 PM

ebay
4 inch round led tail lights found in big rigs
soo many different patterns so choose what you like

A friend showed me the link on zt, i used to be a member on there a few years back but got banned.. but i plan to do that for the third brake light

Kouki · 01-29-2008, 09:45 PM

You could just go to a big truck stop and they should have a good assortment of different size/color led lights. Not too high priced either.

babowc · 01-29-2008, 10:33 PM

I should do this with my stock lights..
wonder how it'd look.

A Spec Products · 01-29-2008, 10:46 PM

That's pretty cool looking

Came out clean looks like

I wouldn't do that to my kouki tails in fear of messing them up

But for FC lights hell yeah

s14dude · 01-29-2008, 10:57 PM

These look wayy hot. prob gunna do this to my kouki tails soon.

*kognition* · 01-29-2008, 10:59 PM

Great mod!

1+

babowc · 01-29-2008, 11:20 PM

I;d be a little iffy doing it on kouki taillights..
considering they're ~$500..
if ya fuck em up.. wow
I'd be overly pissed off. at my self.

Vision Garage · 01-29-2008, 11:22 PM

Wow posi rep to you. But its so much easier on your FC than our s13s because of the design. For Kouki 180 tails it should be easy but not for stockers. + rep anyway!

Vision Garage · 01-29-2008, 11:24 PM

did your center brake light fade out like that stock? It caught my eye!

Skullavera · 01-29-2008, 11:33 PM

Good little write up! I likesy

HyperTek · 01-29-2008, 11:40 PM

hey vision garage- well i recored that with my 5.1 digicam thats like from 2004 so after i recorded that, it had some wierd light fluctuation going on so it looks like the light is pulsing which its not..

on my old s13 i chipped my kouki lights when i accidently backed into someone, so that woulda been a great test mule on those, unfortunately that was a year ago and at the time i never thought about doing it but i always had this in mind.

my drivers side fc tail light is cracked/chipped to begin with.. ill eventually change the lense to better condition sometime later on.. even these tail lights everyone wants like $150-200 for the stock 89+ fc tails

240trainee · 01-30-2008, 07:27 AM

Thats rad dude, I wondered how you did it.

SoSideways · 01-30-2008, 10:18 AM

I was going to do that w/ a set of eBay kouki 180 knock off tails.

Now I'm definitely doing it.

HyperTek · 01-31-2008, 12:30 AM

random jp site strolling... found these pimpage

fromxtor · 01-31-2008, 09:15 AM

Any chance you would be willing to hook us up w/ these for our kouki tails?

HyperTek · 01-31-2008, 11:23 AM

hahaha i been gettign pms... i didnt really make anything new or am selling a product... Im pretty sure if someone wants to experiment with a set of koukis it can be done.. Have to find a way to remove the lense from the housing, usually sticking in the oven fo r a few minutes then try pusing the lense out.

HyperTek · 02-01-2008, 01:47 PM

just reread the ziptied thread.. damm i think imma go out now and pimp more shit on my car... Thinking about doing leds to the front ftp lense

01-29-2008, 08:53 PM	#1
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,222 Trader Rating: (3) Feedback Score: 3 reviews	How To: LED tail lights This is a copypaste from my rx7 forum write ups.. unfortinutly some people liked it, some people did not because of street legal reasons :ghey: So i will say this is "for off road or show only" Did this to my FC, supposibly the only one to do this in the US besides Sexy Knights FC Its pretty much standard im sure it can be done to S13 kouki tails. Pics are self explanatory. Heat up tails at about 250 degrees in oven for a few minutes to get them warm to where the glue is easily plyable. Take them apart. I came up with the idea to throw some aluminum sheeting on the corner blinker, since looking at it with the lense one that it wouldnt really be visble much from the side.. Rip apart the tail lights I used liquid electrical tape to cover the inside leds, this basically blocks the visible light from them, resulting in a "halo" effect. Glue setting adhesive sealant* Gotta put the lense back on and solder up the harness *wiring stuff is pretty easy Swapping to LED turn signals will result in fast blinkers, so the solution is simple. About 5 bucks for 2x 8ohm 20watt resistors from radio shack.. Note these are known to get warm/hot if you have your turn signals on for extended time so mount them somewhere safe.. Figure this should work, i doubt this would get flaming hot.. tested it a few minutes in my hand before making the mount. Turn signals back to normal speeds Finalized and heres a cute little video teeheh [ame]http://youtube.com/watch?v=YD97GuTqetI[/ame] __________________ Keep it Classy

01-29-2008, 08:54 PM	#2
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,222 Trader Rating: (3) Feedback Score: 3 reviews	opps i posted this in wrong section.. mod please move to premie project lol im a premie newbe __________________ Keep it Classy

01-29-2008, 08:57 PM	#3
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 35 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	Id love to see a set of kouki 180sx TailS!!! you should do it for someone hahah. let me ask/. __________________ Robby Leuer

01-29-2008, 09:04 PM	#4
Xandy Boosts Zilvia FREAK! Join Date: Dec 2004 Location: Long beach Age: 35 Posts: 1,003 Trader Rating: (2) Feedback Score: 2 reviews	Where'd you get those circle lights from? Or what's the keyword to search on google __________________ it's a RUCKUS life

01-29-2008, 09:06 PM	#5
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 35 Posts: 5,111 Trader Rating: (17) Feedback Score: 17 reviews	Where is that alley? I seen your pic of the e39 there Robby now tell me. __________________

01-29-2008, 09:07 PM	#6
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 35 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	Secret Un-disclosed spot, Let me and Austie drift at your spot(the furnitureparkinglot), and we'll make it happen. __________________ Robby Leuer

01-29-2008, 09:08 PM	#7
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 35 Posts: 5,111 Trader Rating: (17) Feedback Score: 17 reviews	^You bastard. Well then I guees ill just get it out of you @ the VRT party when your all sauced up. __________________

01-29-2008, 09:09 PM	#8
LB.Motoring Post Whore! Join Date: Jul 2006 Location: SòCal♥ Age: 35 Posts: 5,840 Trader Rating: (1) Rides Gallery: LB.Motoring Feedback Score: 1 reviews	haha you didnt read the secret message? Im never saucy, unless your a girl. __________________ Robby Leuer

01-29-2008, 09:10 PM	#10
Jung918 Post Whore! Join Date: Oct 2003 Location: CA Posts: 3,203 Trader Rating: (2) Feedback Score: 2 reviews	watching that video felt like i was at a rave. Found this thread on ziptied. It has a lot of useful information on a custom led setup. http://www.ziptied.com/forums/index.php?topic=14205.0 __________________ Sale: Hello Kitty Horn Button S14 Rear Valences K.Y. Gordon the Thief (Tony Chen)

01-29-2008, 09:25 PM	#11
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,431 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	yeah, where'd you get the LED circles? Looks sick btw. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

01-29-2008, 09:26 PM	#12
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,222 Trader Rating: (3) Feedback Score: 3 reviews	ebay 4 inch round led tail lights found in big rigs soo many different patterns so choose what you like A friend showed me the link on zt, i used to be a member on there a few years back but got banned.. but i plan to do that for the third brake light __________________ Keep it Classy

01-29-2008, 09:45 PM	#13
Kouki Zilvia Addict Join Date: Feb 2005 Location: Nebraska Age: 36 Posts: 727 Trader Rating: (3) Feedback Score: 3 reviews	You could just go to a big truck stop and they should have a good assortment of different size/color led lights. Not too high priced either.

01-29-2008, 10:33 PM	#14
babowc Post Whore! Join Date: Nov 2005 Location: G.NET Posts: 2,659 Trader Rating: (9) Feedback Score: 9 reviews	I should do this with my stock lights.. wonder how it'd look. __________________ My iTrader rating!

01-29-2008, 10:46 PM	#15
A Spec Products Post Whore! Join Date: Mar 2005 Location: Socal! Off 60/605 Posts: 7,256 Trader Rating: (27) Feedback Score: 27 reviews	That's pretty cool looking Came out clean looks like I wouldn't do that to my kouki tails in fear of messing them up But for FC lights hell yeah __________________ A SPEC PRODUCTS CORP AME Wheels, Advan, ARC, Gram Lights, Nardi, Personal, Recaro, Works Bell, Work Wheels, Volk Racing, 5Zigen, & more! 626.618.1100 x 103 / aim: aspectuan Advertiser's Specials! Read / Give Feedback! Please Rate Us!

01-29-2008, 10:57 PM	#16
s14dude Zilvia Junkie Join Date: Sep 2004 Location: Costa Mesa, CA Posts: 553 Trader Rating: (6) Rides Gallery: s14dude Feedback Score: 6 reviews	These look wayy hot. prob gunna do this to my kouki tails soon. __________________

01-29-2008, 10:59 PM	#17
kognition Premium Member Join Date: May 2004 Location: Santee California Posts: 2,106 Trader Rating: (6) Feedback Score: 6 reviews	Great mod! 1+

01-29-2008, 11:20 PM	#18
babowc Post Whore! Join Date: Nov 2005 Location: G.NET Posts: 2,659 Trader Rating: (9) Feedback Score: 9 reviews	I;d be a little iffy doing it on kouki taillights.. considering they're ~$500.. if ya fuck em up.. wow I'd be overly pissed off. at my self. __________________ My iTrader rating!

01-29-2008, 11:22 PM	#19
Vision Garage Nissanaholic! Join Date: Apr 2007 Location: USDM Land Posts: 1,799 Trader Rating: (9) Feedback Score: 9 reviews	Wow posi rep to you. But its so much easier on your FC than our s13s because of the design. For Kouki 180 tails it should be easy but not for stockers. + rep anyway! __________________

01-29-2008, 11:24 PM	#20
Vision Garage Nissanaholic! Join Date: Apr 2007 Location: USDM Land Posts: 1,799 Trader Rating: (9) Feedback Score: 9 reviews	did your center brake light fade out like that stock? It caught my eye! __________________

01-29-2008, 11:33 PM	#21
Skullavera Zilvia FREAK! Join Date: Sep 2005 Location: City of Angels Posts: 1,327 Trader Rating: (1) Rides Gallery: Skullavera Feedback Score: 1 reviews	Good little write up! I likesy __________________ Reviews/Feedback!

01-29-2008, 11:40 PM	#22
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,222 Trader Rating: (3) Feedback Score: 3 reviews	hey vision garage- well i recored that with my 5.1 digicam thats like from 2004 so after i recorded that, it had some wierd light fluctuation going on so it looks like the light is pulsing which its not.. on my old s13 i chipped my kouki lights when i accidently backed into someone, so that woulda been a great test mule on those, unfortunately that was a year ago and at the time i never thought about doing it but i always had this in mind. my drivers side fc tail light is cracked/chipped to begin with.. ill eventually change the lense to better condition sometime later on.. even these tail lights everyone wants like $150-200 for the stock 89+ fc tails __________________ Keep it Classy

01-30-2008, 07:27 AM	#23
240trainee Post Whore! Join Date: Jun 2003 Location: Richmond, VA Age: 34 Posts: 3,861 Trader Rating: (1) Feedback Score: 1 reviews	Thats rad dude, I wondered how you did it. __________________ Team Pterodactyl SHARK ATTACK!!! LookoutDrift

01-30-2008, 10:18 AM	#24
SoSideways Post Whore! Join Date: Apr 2003 Location: 你老母 Posts: 4,371 Trader Rating: (4) Feedback Score: 4 reviews	I was going to do that w/ a set of eBay kouki 180 knock off tails. Now I'm definitely doing it.

01-31-2008, 12:30 AM	#25
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,222 Trader Rating: (3) Feedback Score: 3 reviews	random jp site strolling... found these pimpage __________________ Keep it Classy

01-31-2008, 09:15 AM	#26
fromxtor Post Whore! Join Date: Aug 2005 Location: NC Age: 40 Posts: 3,012 Trader Rating: (23) Feedback Score: 23 reviews	Any chance you would be willing to hook us up w/ these for our kouki tails? __________________ Seller feedback>>http://www.zilvia.net/f/showthread.p...light=fromxtor

01-31-2008, 11:23 AM	#27
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,222 Trader Rating: (3) Feedback Score: 3 reviews	hahaha i been gettign pms... i didnt really make anything new or am selling a product... Im pretty sure if someone wants to experiment with a set of koukis it can be done.. Have to find a way to remove the lense from the housing, usually sticking in the oven fo r a few minutes then try pusing the lense out. __________________ Keep it Classy

02-01-2008, 01:47 PM	#28
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 13,222 Trader Rating: (3) Feedback Score: 3 reviews	just reread the ziptied thread.. damm i think imma go out now and pimp more shit on my car... Thinking about doing leds to the front ftp lense __________________ Keep it Classy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode