S14 bottom 2 strut bolts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Nostradamus · 04-02-2005, 09:22 AM

Special order from the dealer. I need them by tomorrow. Anyone know what they cross reference with. S13's are smaller, already tried. Went to Lowes and got a 9/16" but it was tiny bit too big. Anybody? Thanks...

Dave.

gmckey · 04-02-2005, 10:44 AM

you can run a slightly smaller bolt w/ some lock washers on the ends... I crossthreaded one of mine and used a slightly smaller home depot bolt for the couple days it took for the correct bolt to come in at the Nissan dealership.

projectRDM · 04-02-2005, 05:26 PM

M14x1.25, don't know length though.

Nostradamus · 04-03-2005, 11:43 AM

Length is about 2" and the diameter goes from 14mm and tapers to 15mm. I took the bolt to the dealer and they found one almost exactly like it from a different Nissan. He didn't know what car it was for but it works perfect. Thanks for your help...

Dave.

Tulok · 12-29-2020, 07:32 PM

Nissan part number 40056-70T10

jr_ss · 01-02-2021, 05:28 AM

Quote:

Originally Posted by Tulok

Nissan part number 40056-70T10

Dude, did you even check the original post date? This is from 05?!

*brndck* · 01-04-2021, 09:04 AM

Quote:

Originally Posted by Tulok

Nissan part number 40056-70T10

Quote:

Originally Posted by jr_ss

Dude, did you even check the original post date? This is from 05?!

lol at least its a USEFUL bit of info for once! usually its someone asking the same question as the OP

jedi03 · 01-11-2021, 10:59 AM

Rofl no kidding...much better than the norm of not hearing how projects finish!

kyral · 01-18-2021, 05:18 PM

this necro actually just helped me a little in identifying some knuckles XD

04-02-2005, 09:22 AM	#1
Nostradamus Zilvia Junkie Join Date: Sep 2003 Location: poolhall ma Posts: 355 Trader Rating: (0) Feedback Score: 0 reviews	S14 bottom 2 strut bolts Special order from the dealer. I need them by tomorrow. Anyone know what they cross reference with. S13's are smaller, already tried. Went to Lowes and got a 9/16" but it was tiny bit too big. Anybody? Thanks... Dave. __________________

04-02-2005, 05:26 PM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	M14x1.25, don't know length though. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

04-03-2005, 11:43 AM	#4
Nostradamus Zilvia Junkie Join Date: Sep 2003 Location: poolhall ma Posts: 355 Trader Rating: (0) Feedback Score: 0 reviews	Length is about 2" and the diameter goes from 14mm and tapers to 15mm. I took the bolt to the dealer and they found one almost exactly like it from a different Nissan. He didn't know what car it was for but it works perfect. Thanks for your help... Dave. __________________

01-18-2021, 05:18 PM	#9
kyral Zilvia Junkie Join Date: Nov 2012 Location: wisconsin Age: 29 Posts: 447 Trader Rating: (7) Rides Gallery: kyral Feedback Score: 7 reviews	this necro actually just helped me a little in identifying some knuckles XD __________________ The Game you lose haha

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-02-2005, 10:44 AM	#2
gmckey Zilvia Junkie Join Date: Feb 2003 Location: Austin, Tx Posts: 301 Trader Rating: (0) Feedback Score: 0 reviews	you can run a slightly smaller bolt w/ some lock washers on the ends... I crossthreaded one of mine and used a slightly smaller home depot bolt for the couple days it took for the correct bolt to come in at the Nissan dealership.

12-29-2020, 07:32 PM	#5
Tulok Zilvia Member Join Date: May 2008 Location: SO CAL!!! Posts: 232 Trader Rating: (1) Feedback Score: 1 reviews	Nissan part number 40056-70T10

01-11-2021, 10:59 AM	#8
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,784 Trader Rating: (8) Feedback Score: 8 reviews	Rofl no kidding...much better than the norm of not hearing how projects finish!