ls swap question. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

church401 · 09-28-2015, 08:49 PM

Ill get right to the point.

sikky kit 1600$ comes with oil pan drive shaft motor mounts and tranny mounts headers

hooker kit needs bushings and driveshaftt, its 400$ less but it seems like you have to spend 400$ to get the same parts that the other kit comes with...? what drive shaft can you use for the hooker kit?

roboticnissan · 09-28-2015, 09:10 PM

You need a custom one made to fit. Where I'm from you can get one made for 300 ish

roboticnissan · 09-28-2015, 09:12 PM

http://fueledracing.com/

I'd steer clear of the mentioned products and go Check out fueled racing. It's what I've used. Everyone else i know had issues with other kits.

2muchboost · 09-28-2015, 09:50 PM

Custom DS usually range between $300-450 from what I gather. I will say that structurally the SIKKY oil pan is as close to the GM pan design. Allegedly the design increases bottom end stength/rigidity due to the design. Not sure if it matters to you just thought I would share the info.

AzS13hatch · 09-29-2015, 02:14 AM

Just curious why go with a kit that cost $400 less just to spend the same amount and have to order custom d/s and measure for yourself. Not saying you would get the measurements wrong, but why not go with the complete kit? I don't have an LS so I'm not sure if one kit is better than the other for any reasons, just curious.

jorge1190 · 09-29-2015, 05:58 AM

The 1600 sikky kit does not come with headers. The 1200 hooker kit comes with headers and will work with the sikky driveshaft.

*bmhossain* · 09-30-2015, 03:00 PM

I used a Sikky Kit on a G35 LSx swap and was not impressed with the quality on the oil pan. There were some issues with the bolt holes being too close to the side of the pan and rubbing to get them tightened. Daft Innovations S13 kit I had back in 2009 was really good if you don't mind the crossmember mod. I have never owned a Hooker kit but I would go that route of Fueled if I were to do it today. In my personal opinion Sikky is over priced and does not include the headers.

09-28-2015, 08:49 PM	#1
church401 Join Date: Sep 2015 Location: bristol ri Age: 28 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	ls swap question. Ill get right to the point. sikky kit 1600$ comes with oil pan drive shaft motor mounts and tranny mounts headers hooker kit needs bushings and driveshaftt, its 400$ less but it seems like you have to spend 400$ to get the same parts that the other kit comes with...? what drive shaft can you use for the hooker kit?

09-28-2015, 09:10 PM	#2
roboticnissan Nissanaholic! Join Date: Mar 2007 Location: SOCAL/NORCAL Age: 32 Posts: 1,867 Trader Rating: (12) Feedback Score: 12 reviews	You need a custom one made to fit. Where I'm from you can get one made for 300 ish __________________

09-28-2015, 09:12 PM	#3
roboticnissan Nissanaholic! Join Date: Mar 2007 Location: SOCAL/NORCAL Age: 32 Posts: 1,867 Trader Rating: (12) Feedback Score: 12 reviews	http://fueledracing.com/ I'd steer clear of the mentioned products and go Check out fueled racing. It's what I've used. Everyone else i know had issues with other kits. __________________

09-29-2015, 05:58 AM	#6
jorge1190 Zilvia Junkie Join Date: Mar 2008 Location: Culpeper, Va Age: 30 Posts: 593 Trader Rating: (12) Feedback Score: 12 reviews	The 1600 sikky kit does not come with headers. The 1200 hooker kit comes with headers and will work with the sikky driveshaft. __________________ 96 240sx S13 SR20 521 WHP 405 TQ

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-28-2015, 09:50 PM	#4
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 37 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Custom DS usually range between $300-450 from what I gather. I will say that structurally the SIKKY oil pan is as close to the GM pan design. Allegedly the design increases bottom end stength/rigidity due to the design. Not sure if it matters to you just thought I would share the info.

09-29-2015, 02:14 AM	#5
AzS13hatch Leaky Injector Join Date: Oct 2014 Location: AZ/ South Korea Age: 33 Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	Just curious why go with a kit that cost $400 less just to spend the same amount and have to order custom d/s and measure for yourself. Not saying you would get the measurements wrong, but why not go with the complete kit? I don't have an LS so I'm not sure if one kit is better than the other for any reasons, just curious.

09-30-2015, 03:00 PM	#7
bmhossain Premium Member Join Date: Feb 2008 Location: Topeka KS Age: 38 Posts: 517 Trader Rating: (34) Feedback Score: 34 reviews	I used a Sikky Kit on a G35 LSx swap and was not impressed with the quality on the oil pan. There were some issues with the bolt holes being too close to the side of the pan and rubbing to get them tightened. Daft Innovations S13 kit I had back in 2009 was really good if you don't mind the crossmember mod. I have never owned a Hooker kit but I would go that route of Fueled if I were to do it today. In my personal opinion Sikky is over priced and does not include the headers.