Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-31-2013, 07:17 PM   #1
chozobody
 
Join Date: Mar 2013
Location: Hastings, NE
Posts: 17
Trader Rating: (0)
chozobody is an unknown quantity at this point
Feedback Score: 0 reviews
S13 Exhaust Removal

I'm in the process of removing the exhaust from my S13. The previous owner replaced the stock exhaust with some no name headers and a straight pipe. (Middle of Nebraska, what do you expect?) I have all the header bolts removed, and I have all but one of the rubber bushings removed from the rear. I have two spots that I can't figure out though. One spot is a solid metal s-shaped hose, and the other is a slightly bigger, L-shaped hose that looks screwed into the header. I need this out fairly soon so I can put my new motor in. Any advice would be greatly appreciated.
240 - Imgur
chozobody is offline   Reply With Quote
Sponsored Links
Old 03-31-2013, 08:03 PM   #2
foreverdeath
Zilvia Junkie
 
foreverdeath's Avatar
 
Join Date: Sep 2012
Location: va beach
Age: 28
Posts: 318
Trader Rating: (3)
foreverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the rough
Feedback Score: 3 reviews
he s hose is for PAIR, and the u shaped pipe is the egr tube. never that joy to trying to remove these. easyest way i assume would be using a large pipe wrench of vise grips, if you want to keep your emissions.
foreverdeath is offline   Reply With Quote
Old 03-31-2013, 08:28 PM   #3
codyace
Post Whore!
 
codyace's Avatar
 
Join Date: Dec 2004
Location: Poconos, PA
Age: 36
Posts: 8,030
Trader Rating: (58)
codyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfection
Feedback Score: 58 reviews
Send a message via AIM to codyace
I'm unsure what the lower hose is, but the upper threaded one is your EGR tube.

Unless your state requires emissions it's easier to cut the egr pipe and remove the system off the car (also putting a cap on the EGR valve) and then remove it on the bench (if it even comes out). You can attempt at soaking it in penetrate, but it may be nearly impossible without heat and penetrating oil.
__________________

Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!

Quest Alternator Conversions for SR20! Check my Group Buy!

Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy
codyace is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:27 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™