Closed Throttle Position (hesitation/stalling) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

GonadSX · 06-30-2005, 11:36 AM

I had the car hookd up to CONSULT II and was looking at the readout.

I noticed the CLOSED THROTTLE POSITION was somewhat out of sync.

Early on while troubleshooting, I noticed the CLOSED THROTTLE POSITION value was OFF (even though throttle wasn't open).

My TPS voltage was 0.44v constant and it changed on throttle (roughly 5v at WOT).

Is the CLOSED THROTTLE POSITION a separate sensor or is it part of the TPS?

06-30-2005, 11:36 AM	#1
GonadSX Leaky Injector Join Date: Jun 2003 Location: Ontario Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Closed Throttle Position (hesitation/stalling) I had the car hookd up to CONSULT II and was looking at the readout. I noticed the CLOSED THROTTLE POSITION was somewhat out of sync. Early on while troubleshooting, I noticed the CLOSED THROTTLE POSITION value was OFF (even though throttle wasn't open). My TPS voltage was 0.44v constant and it changed on throttle (roughly 5v at WOT). Is the CLOSED THROTTLE POSITION a separate sensor or is it part of the TPS? __________________ Gautam :: Google Specialist :: www.my240.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode