What engine mounts to you use on a RB S14 conversion - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ryan_1 · 07-13-2013, 03:50 PM

Hey guys
Im doing a RB25 conversion in to my S14. I have a R32 crossmember and not sure what engine mounts are on the motor at the moment it came out of my S13 and used to rub the bonnet a little bit on the cam cover. Just wondering what engine mounts should I use to lower the motor a little more?

Thanks

Sileighty_85 · 07-13-2013, 05:07 PM

To make it fit the best you would need a R33 crossmember and a set of SYKO Mounts

*fliprayzin240sx* · 07-14-2013, 06:35 PM

You can't use an R32 cross member on an RB25 since the angles are off. Only way you can use is it is if you swap out the engine mount metal brackets for R32 brackets.

LMFC · 07-14-2013, 07:59 PM

I used the r33 xmember and the factory mounts. But if you can swing it I would use the syko mounts with r33 xmember.

07-13-2013, 03:50 PM	#1
Ryan_1 Leaky Injector Join Date: May 2010 Location: Brisbane Age: 31 Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	What engine mounts to you use on a RB S14 conversion Hey guys Im doing a RB25 conversion in to my S14. I have a R32 crossmember and not sure what engine mounts are on the motor at the moment it came out of my S13 and used to rub the bonnet a little bit on the cam cover. Just wondering what engine mounts should I use to lower the motor a little more? Thanks

07-13-2013, 05:07 PM	#2
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	To make it fit the best you would need a R33 crossmember and a set of SYKO Mounts __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

07-14-2013, 06:35 PM	#3
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	You can't use an R32 cross member on an RB25 since the angles are off. Only way you can use is it is if you swap out the engine mount metal brackets for R32 brackets. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-14-2013, 07:59 PM	#4
LMFC Leaky Injector Join Date: Nov 2012 Location: Michigan Age: 32 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	I used the r33 xmember and the factory mounts. But if you can swing it I would use the syko mounts with r33 xmember.