|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
 |
|
|
Thread Tools | Display Modes |
12-10-2016, 10:25 AM
|
#1 |
|
HALP! First time timing.(lol)
Alright, so I installed a new water pump and before I put the new timing belt on is there anything I NEED to do?.. I know number 1 cyl. needs to be at top dead and all three gears need to be lined up at their marks. I'm kind of puzzled on what to do exactly, I've looked at a bunch of vids but they leave me a little skeptical on when it's appropriate to start my motor. It's just a stock rb25det series 2.
|
|
|
| Sponsored Links |
|
12-10-2016, 10:40 AM
|
#2 |
|
Nissanaholic!
 
|
Sorry misread the question.
The water pump is not usually run off the timing belt...
__________________
MRP Manufacturing |
|
|
|
|
12-10-2016, 10:46 AM
|
#3 | |
|
|
Quote:
What do you have to do to make sure you (I) wouldnt bend a valve or of that nature lol.
__________________
|
|
|
|
|
|
12-10-2016, 11:05 AM
|
#4 |
|
|
Is it just make sure the gears are lined with their marks while the number one piston is at top dead and install timing belt and im good? If so than i would just need to line the CAS back up with the marks i made and start her up?
Sorry if this is confusing.
__________________
|
|
|
|
|
12-10-2016, 04:36 PM
|
#6 |
|
Nissanaholic!
|
Did you try looking for the factory service manual online?
__________________
MRP Manufacturing |
|
|
|
|
12-14-2016, 05:40 PM
|
#7 |
|
|
Yea,i did and it was informational but not exactly helpful. I ended up putting everything back together as I was pretty sure I did things right. Motor is mechanically sound and idles fine.
__________________
|
|
|
|
|
| Bookmarks |
| Tags |
| drifto, rb25, s13, welded |
| Thread Tools | |
| Display Modes | |
|
|
Anybodeh?
Linear Mode
