Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 04-09-2015, 07:25 AM   #1
StoopidLoose88
 
Join Date: Jan 2015
Location: Spring Hill, FL
Age: 25
Posts: 38
Trader Rating: (0)
StoopidLoose88 is an unknown quantity at this point
Feedback Score: 0 reviews
Overfender Guide

Ok I've searched the forum and google and have not found the concrete info I'm looking for. What are all the options for rear over fenders(in my case for an s13 coupe, but I'm fine with someone who has knowledge about s13 hatch/s14/s15 posting so it may help someone down the road!). So far the ones I know of are the Origin overfenders(I'm sure there are many other brands and options I'm missing.)

Origin Type 1 (Available in 50mm)
Origin Type 2 (Available in 50mm)
Origin Tatakadasi fender pull (Available in 30mm/50mm)

I have no clue what any differences are in these three. After doing some image searching on google I found mixed results but the trend seemed to be:

Origin Type 1 - Smooth sides
Origin Type 2 - Stepped sides or Sides with a fine body line in them (not sure which one)
Origin Tatakadasi fender pull - Appears to be type 2 with a molded 'roll' to the fender

If you add please try to put your info in this format and i will add it to the original post

Brand and name of overfender(Sizes its available in)
What s-chassis it is for
Price
A description of its physical appearance/what makes it different

Hopefully we can get some concrete knowledge on this subject and possibly get this to be a full "Overfender Guide" sticky for all the s chassis'

Overfenders Guide:

S13

Origin Lab type 1(50mm)
s13 coupe/hatchback
$306
Thin body line(similar to chargespeeds), follow window/trunk lines, wrap around taillights

Origin Lab type 2(50mm)
s13 coupe/hatchback
$306
Stepped side, follow window/trunk lines, wrap around taillights

Origin Lab type 3(55mm)
s13 coupe/hatchback
$395
OEM body line, flared fender, follow window/trunk lines, wrap around taillights

Origin Lab Tatakadasi fender pull(30mm/50mm)
s13 coupe/hatchback
$306
Appear to be smooth side with flare around wheel well(simulated fender roll), follow window/trunk lines, wrap around taillights

Extreme Dimensions "Gt-R" style/Duraflex B-Sport(50MM)
s13 coupe
$299
Which would be a copy of Origin Type 2, fitment was surprisingly good, they are thin and VERY flexible. Only Issues i have with them are:
1. They do not have the body line (the little bead in the middle of the body)
2. The gas filler cap area needs a bit of work, for the cap to fit (not a big issue though)
Overall very pleased with them. -japslapsilvia

VIS Drift X(30mm)
s13 coupe/hatchback
$249
Look like they follow window/trunk lines, wrap around taillights and have OEM body line through them

chargespeed(50mm)
s13 coupe/hatchback
$499.00
top notch, fitment was absolutely perfect. very little prep work required, I primed and wet sanded once and they were ready for paint. they wrap around the tail lights, and come up to the door. notice how the lines ride the window and trunk lines perfect. they come with a nice gas door assembly, but im a ricer and i like how it looks sunk... overall I love them. -jsu1012

S14

Origin Lab type 2(50mm)
s14
$306
Follow window/trunk/taillight lines, with a stepped side. In my opinion the fit it absolutely horrible. A ton of sanding and straightening has to be done so things line up how they should.

Last edited by StoopidLoose88; 04-11-2015 at 07:01 AM.. Reason: adding information
StoopidLoose88 is offline   Reply With Quote
Sponsored Links
Old 04-09-2015, 09:07 AM   #2
jsu1012
Zilvia FREAK!
 
jsu1012's Avatar
 
Join Date: May 2011
Location: Oklahoma
Age: 35
Posts: 1,102
Trader Rating: (13)
jsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura about
Feedback Score: 13 reviews
If you really did google and looked at the lines and styles of the overs, you'd have each down within 30 min. but i'll play along.

here's mine:
Brand: chargespeed , 50mm
s13 coupe
price:$659.00 shipped.
quality: top notch, fitment was absolutely perfect. very little prep work required, I primed and wet sanded once and they were ready for paint. they wrap around the tail lights, and come up to the door. notice how the lines ride the window and trunk lines perfect. they come with a nice gas door assembly, but im a ricer and i like how it looks sunk... overall I love them.







__________________

Last edited by jsu1012; 06-25-2015 at 01:03 PM..
jsu1012 is offline   Reply With Quote
Old 04-09-2015, 05:48 PM   #3
StoopidLoose88
 
Join Date: Jan 2015
Location: Spring Hill, FL
Age: 25
Posts: 38
Trader Rating: (0)
StoopidLoose88 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by jsu1012 View Post
If you really did google and looked at the lines and styles of the overs, you'd have each down within 30 min. but i'll play along.
Thank you for contributing, car looks great, I actually follow you on Instagram already lol. How were your overs fastened? Most I've seen are riveted but yours almost look factory smooth.
StoopidLoose88 is offline   Reply With Quote
Old 04-09-2015, 07:12 PM   #4
TurboTiger
Leaky Injector
 
Join Date: Jul 2014
Location: West Coast
Posts: 77
Trader Rating: (0)
TurboTiger is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by jsu1012 View Post
If you really did google and looked at the lines and styles of the overs, you'd have each down within 30 min. but i'll play along.

here's mine:
Brand: chargespeed , 50mm
s13 coupe
price:$659.00
quality: top notch, fitment was absolutely perfect. very little prep work required, I primed and wet sanded once and they were ready for paint. they wrap around the tail lights, and come up to the door. notice how the lines ride the window and trunk lines perfect. they come with a nice gas door assembly, but im a ricer and i like how it looks sunk... overall I love them.
Damn. It's refreshing to see a 240 as clean as your on these boards.
TurboTiger is offline   Reply With Quote
Old 04-09-2015, 07:33 PM   #5
DriftingBrandon
Zilvia FREAK!
 
DriftingBrandon's Avatar
 
Join Date: Jan 2015
Location: Central Florida
Age: 22
Posts: 1,405
Trader Rating: (1)
DriftingBrandon is an unknown quantity at this point
Feedback Score: 1 reviews
Maybe you guys can help me. I'll of course will measure and fine tune myself, but some insight is awesome. 1993 Nissan 240sx S13 (will 5 lug swap) I have Front: 17x10 +5 (215/45/R17) & Rear: 18x11 +25 (245/40/R18) . What spacer/overfender sizes would you think would be the best match. I want atleast 50mm rear fender, atleast 25mm front. Thanks!
__________________
DriftingBrandon is offline   Reply With Quote
Old 04-09-2015, 07:42 PM   #6
jsu1012
Zilvia FREAK!
 
jsu1012's Avatar
 
Join Date: May 2011
Location: Oklahoma
Age: 35
Posts: 1,102
Trader Rating: (13)
jsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura about
Feedback Score: 13 reviews
Quote:
Originally Posted by StoopidLoose88 View Post
Thank you for contributing, car looks great, I actually follow you on Instagram already lol. How were your overs fastened? Most I've seen are riveted but yours almost look factory smooth.
Lol right on. Mine are pop riveted .

Quote:
Originally Posted by TurboTiger View Post
Damn. It's refreshing to see a 240 as clean as your on these boards.
Thanks man.

Quote:
Originally Posted by TopazBrandon View Post
Maybe you guys can help me. I'll of course will measure and fine tune myself, but some insight is awesome. 1993 Nissan 240sx S13 (will 5 lug swap) I have Front: 17x10 +5 (215/45/R17) & Rear: 18x11 +25 (245/40/R18) . What spacer/overfender sizes would you think would be the best match. I want atleast 50mm rear fender, atleast 25mm front. Thanks!
Depends on how much camber you want to run. That front size would be too easy. I did 18x10.5 , -3 up front on metal fender. The rear depending on ride height and camber would be 12-20mm spacers .
__________________
jsu1012 is offline   Reply With Quote
Old 04-10-2015, 07:27 AM   #7
StoopidLoose88
 
Join Date: Jan 2015
Location: Spring Hill, FL
Age: 25
Posts: 38
Trader Rating: (0)
StoopidLoose88 is an unknown quantity at this point
Feedback Score: 0 reviews
Ok I updated the original post to start consolidating the information lol I hope to make this a pretty full guide for people looking into overfenders
StoopidLoose88 is offline   Reply With Quote
Old 04-10-2015, 07:57 AM   #8
japslapsilvia
Zilvia FREAK!
 
japslapsilvia's Avatar
 
Join Date: Nov 2007
Location: dallas, TX
Age: 38
Posts: 1,244
Trader Rating: (12)
japslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the rough
Feedback Score: 12 reviews
Here is mine, they are Extreme Dimensions "Gt-R" style 50MM, Which would be a copy of Origin Type 2.

Fitment was surprisingly good, they are thin and VERY flexible. Only Issues i have with them are:
1. They do not have the body line (the little bead in the middle of the body)
2. The gas filler cap area needs a bit of work, for the cap to fit (not a big issue though)
Overall very pleased with them.

this is just tape holding them on


I used Rivit Nuts to fasten them (low profile allen head screws)





Sorry i dont currently have any better pics of the back
__________________

Quote:
Originally Posted by jspecusa View Post

Nothing is rare just expensive.
Quote:
Originally Posted by ixfxi View Post
if you've ever been with multiple women, then even you can understand that not all girlfriends are created equal. some are capable of amazing oral talents, while others dont mind a lill back door action.
japslapsilvia is offline   Reply With Quote
Old 04-10-2015, 08:21 AM   #9
xGhettosledx
 
Join Date: Nov 2008
Location: Anderson IN
Posts: 36
Trader Rating: (1)
xGhettosledx is an unknown quantity at this point
Feedback Score: 1 reviews
I have authentic origin type 2 50mm rears on my s14 and in my opinion the fit it absolutely horrible. A ton of sanding and straightening has to be done so things line up how they should.
xGhettosledx is offline   Reply With Quote
Old 04-11-2015, 06:22 AM   #10
henjupole
 
Join Date: Apr 2015
Location: CA
Age: 35
Posts: 1
Trader Rating: (0)
henjupole is an unknown quantity at this point
Feedback Score: 0 reviews
It's refreshing to see a 240 as clean as your on these boards.
henjupole is offline   Reply With Quote
Old 04-11-2015, 06:30 AM   #11
StoopidLoose88
 
Join Date: Jan 2015
Location: Spring Hill, FL
Age: 25
Posts: 38
Trader Rating: (0)
StoopidLoose88 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by japslapsilvia View Post
Here is mine, they are Extreme Dimensions "Gt-R" style 50MM, Which would be a copy of Origin Type 2.



Fitment was surprisingly good, they are thin and VERY flexible. Only Issues i have with them are:

1. They do not have the body line (the little bead in the middle of the body)

2. The gas filler cap area needs a bit of work, for the cap to fit (not a big issue though)

Overall very pleased with them.

They look really good though, I'll add the info for these to the original post!

Quote:
Originally Posted by xGhettosledx View Post
I have authentic origin type 2 50mm rears on my s14 and in my opinion the fit it absolutely horrible. A ton of sanding and straightening has to be done so things line up how they should.

Congrats, you're the first s14 to post in this thread! Lol but that surprises me, previously I had never heard anything bad about origin products, but it has been noted and I'll post this in the original post, thanks!


Sent from my iPhone using Tapatalk
StoopidLoose88 is offline   Reply With Quote
Old 04-13-2015, 12:51 PM   #12
DennisC
Zilvia Junkie
 
DennisC's Avatar
 
Join Date: Dec 2010
Location: Elk Grove
Posts: 581
Trader Rating: (9)
DennisC is an unknown quantity at this point
Feedback Score: 9 reviews
Extreme Dimensions Duraflex M-1 Sport 30mm Rear over fenders for S14
Fitment-9/10
Fit very well once bolted on and I just had to fix a few very minor cracks. Required no trimming.

Only held on with tape

Primed and block sanded

Test fitted with only 8 screws


Painted and installed with 25 rivnuts/screws per side
__________________
DennisC is offline   Reply With Quote
Old 04-13-2015, 01:19 PM   #13
jsu1012
Zilvia FREAK!
 
jsu1012's Avatar
 
Join Date: May 2011
Location: Oklahoma
Age: 35
Posts: 1,102
Trader Rating: (13)
jsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura about
Feedback Score: 13 reviews
when you need 25 rivets on each side i dont think its a 9/10 fitment lol. driver side in front of the wheel the panel is cut at an angle or what?
__________________
jsu1012 is offline   Reply With Quote
Old 04-13-2015, 01:24 PM   #14
bigs
Nissanaholic!
 
Join Date: Sep 2007
Location: Atlanta
Age: 30
Posts: 1,674
Trader Rating: (6)
bigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of lightbigs is a glorious beacon of light
Feedback Score: 6 reviews
Quote:
Originally Posted by DennisC View Post
Fitment-9/10
Those look like they fit like absolute shit...
bigs is offline   Reply With Quote
Old 04-13-2015, 01:25 PM   #15
StatticMyke
Zilvia Member
 
StatticMyke's Avatar
 
Join Date: Nov 2013
Location: Oklahoma
Posts: 221
Trader Rating: (1)
StatticMyke is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by DennisC View Post
Extreme Dimensions Duraflex M-1 Sport 30mm Rear over fenders for S14
Fitment-9/10
Fit very well once bolted on and I just had to fix a few very minor cracks. Required no trimming.

Painted and installed with 25 rivnuts/screws per side

9/10 wtf???? Both sides have obvious differences in how they are cut. On the drivers side there is a gap in the front of the fender well. Whats up with the passenger side around the tail light? Looks like a kid cut it with some scissors.
StatticMyke is offline   Reply With Quote
Old 04-13-2015, 01:35 PM   #16
DennisC
Zilvia Junkie
 
DennisC's Avatar
 
Join Date: Dec 2010
Location: Elk Grove
Posts: 581
Trader Rating: (9)
DennisC is an unknown quantity at this point
Feedback Score: 9 reviews
It's extreme dimensions... wasn't expecting perfect looking parts. Maybe I gave it too high of a rating then if you guys really think it fits that bad. For the price I got them for and they fit right on out of the box, I think it was worth the money. The main reason I got them was to cover up my quarter panel bondo job by a previous owner.
Quote:
Originally Posted by jsu1012 View Post
when you need 25 rivets on each side i dont think its a 9/10 fitment lol. driver side in front of the wheel the panel is cut at an angle or what?
25 is just about what every one else uses.
__________________
DennisC is offline   Reply With Quote
Old 04-13-2015, 03:22 PM   #17
Martino
Zilvia FREAK!
 
Martino's Avatar
 
Join Date: Mar 2008
Location: Toronto, Canada
Posts: 1,000
Trader Rating: (8)
Martino is an unknown quantity at this point
Feedback Score: 8 reviews
Quote:
Originally Posted by DennisC View Post

25 is just about what every one else uses.

More like 8 - 10 lol
__________________
IG: @vsMARTINO
Martino is offline   Reply With Quote
Old 04-14-2015, 04:17 AM   #18
BoostinIX
Zilvia Addict
 
BoostinIX's Avatar
 
Join Date: Feb 2008
Location: Laurel, MD
Age: 36
Posts: 815
Trader Rating: (29)
BoostinIX is an unknown quantity at this point
Feedback Score: 29 reviews
Send a message via ICQ to BoostinIX Send a message via AIM to BoostinIX Send a message via MSN to BoostinIX Send a message via Yahoo to BoostinIX
Dmax are lookin spiffy for the price
__________________
BoostinIX is offline   Reply With Quote
Old 04-14-2015, 07:51 AM   #19
jsu1012
Zilvia FREAK!
 
jsu1012's Avatar
 
Join Date: May 2011
Location: Oklahoma
Age: 35
Posts: 1,102
Trader Rating: (13)
jsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura aboutjsu1012 has a spectacular aura about
Feedback Score: 13 reviews
Quote:
Originally Posted by DennisC View Post

25 is just about what every one else uses.
lol na man . i used maybe 8-10.
__________________
jsu1012 is offline   Reply With Quote
Old 04-14-2015, 09:43 AM   #20
simmode1
Post Whore!
 
simmode1's Avatar
 
Join Date: Feb 2008
Location: Addison, TX
Posts: 5,526
Trader Rating: (0)
simmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfectionsimmode1 is close to perfection
Feedback Score: 0 reviews
Send a message via Yahoo to simmode1
Nevermind. Wrong thread.
__________________
"Simplicity is the key to brilliance." - Bruce Lee
simmode1 is offline   Reply With Quote
Old 04-15-2015, 05:43 AM   #21
DriftingBrandon
Zilvia FREAK!
 
DriftingBrandon's Avatar
 
Join Date: Jan 2015
Location: Central Florida
Age: 22
Posts: 1,405
Trader Rating: (1)
DriftingBrandon is an unknown quantity at this point
Feedback Score: 1 reviews
s13 What size I've fenders?

Edited: repost
__________________

Last edited by DriftingBrandon; 04-15-2015 at 07:09 PM..
DriftingBrandon is offline   Reply With Quote
Old 04-15-2015, 07:15 AM   #22
blueshark123
Post Whore!
 
blueshark123's Avatar
 
Join Date: Apr 2006
Location: North Jersey
Posts: 5,481
Trader Rating: (55)
blueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant futureblueshark123 has a brilliant future
Feedback Score: 55 reviews
get 50mm fenders^
blueshark123 is offline   Reply With Quote
Old 04-15-2015, 10:09 AM   #23
DriftingBrandon
Zilvia FREAK!
 
DriftingBrandon's Avatar
 
Join Date: Jan 2015
Location: Central Florida
Age: 22
Posts: 1,405
Trader Rating: (1)
DriftingBrandon is an unknown quantity at this point
Feedback Score: 1 reviews
s13

Quote:
Originally Posted by blueshark123 View Post
get 50mm fenders^
I Think so too. The previous owner just told me he ran a 27mm (1.06) spacer with a 50mm fender and the fitment was perfect. My 1" spacer should be around the same. Shouldn't make a huge difference. I always have the option to tuck my 18's

Link to his pictures: http://zilvia.net/f/showthread.php?t=594403
__________________
DriftingBrandon is offline   Reply With Quote
Old 04-15-2015, 03:22 PM   #24
DriftingBrandon
Zilvia FREAK!
 
DriftingBrandon's Avatar
 
Join Date: Jan 2015
Location: Central Florida
Age: 22
Posts: 1,405
Trader Rating: (1)
DriftingBrandon is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by TopazBrandon View Post
I need Coilovers I'll run probably -5 camber. but what fenders should fit my car? 18x11 +25 with an 1" spacer. 30mm or 50mm?


-

-
Images are now Visable.
__________________
DriftingBrandon is offline   Reply With Quote
Old 04-15-2015, 09:10 PM   #25
DriftingBrandon
Zilvia FREAK!
 
DriftingBrandon's Avatar
 
Join Date: Jan 2015
Location: Central Florida
Age: 22
Posts: 1,405
Trader Rating: (1)
DriftingBrandon is an unknown quantity at this point
Feedback Score: 1 reviews
First photo is a 30mm over fender on the REAR placed on the side. I think 50mm rear is the idle size. OKAY. The front... front Wheels. 17x10 +5 with a 1" spacer. I think 30mm front will be perfect with some camber.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
__________________
DriftingBrandon is offline   Reply With Quote
Old 04-15-2015, 09:48 PM   #26
Kuma
Zilvia Addict
 
Kuma's Avatar
 
Join Date: May 2012
Location: The last house on the right
Age: 35
Posts: 758
Trader Rating: (0)
Kuma is an unknown quantity at this point
Feedback Score: 0 reviews
is the 1" spacer necessary? seems like if 50mm overs were perfect with 1" spacers, 30mm overs should be really close without 1" spacers... might have to run without camber, but I don't personally see that as a bad thing.
Kuma is offline   Reply With Quote
Old 04-15-2015, 10:15 PM   #27
MR_GUTTI
Zilvia Junkie
 
MR_GUTTI's Avatar
 
Join Date: Nov 2009
Location: Houston
Posts: 324
Trader Rating: (9)
MR_GUTTI is an unknown quantity at this point
Feedback Score: 9 reviews
I agree with Kuma, maybe because I'm not a fan of the 50mm over! I will remove the spacer and use the 30mm


I have 18x10.5 +0 with no spacer and 30mm over ( I still need to add camber )
MR_GUTTI is offline   Reply With Quote
Old 04-15-2015, 10:35 PM   #28
DriftingBrandon
Zilvia FREAK!
 
DriftingBrandon's Avatar
 
Join Date: Jan 2015
Location: Central Florida
Age: 22
Posts: 1,405
Trader Rating: (1)
DriftingBrandon is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by MR_GUTTI View Post
I agree with Kuma, maybe because I'm not a fan of the 50mm over! I will remove the spacer and use the 30mm


I have 18x10.5 +0 with no spacer and 30mm over ( I still need to add camber )
Nice, yes my goal is F: 30mm R: 50mm. I love the 50mm because when you look from the back. The wheel and tire is showing from the side, yet isn't poking out of the fender.

[IMG][/IMG]
__________________

Last edited by DriftingBrandon; 04-15-2015 at 11:12 PM..
DriftingBrandon is offline   Reply With Quote
Old 04-16-2015, 10:54 AM   #29
gallo
Zilvia Junkie
 
gallo's Avatar
 
Join Date: Dec 2009
Location: el paso texas
Posts: 350
Trader Rating: (1)
gallo is an unknown quantity at this point
Feedback Score: 1 reviews
Vis 25mm front and rear. fit good no modification just rivet them right in

__________________
Corgis, R34 GTR, LS-14, S13 sil-40, LS-260z
[email protected]_915
gallo is offline   Reply With Quote
Old 04-16-2015, 11:39 AM   #30
DriftingBrandon
Zilvia FREAK!
 
DriftingBrandon's Avatar
 
Join Date: Jan 2015
Location: Central Florida
Age: 22
Posts: 1,405
Trader Rating: (1)
DriftingBrandon is an unknown quantity at this point
Feedback Score: 1 reviews
Do they make 30mm front s13(pop up) 180sx front fenders? 30mm would be perfect. I've been doing some searching and haven't found anything but 30mm rears.

How is VIS fitment? I could go 25mm with a ton of camber lol
__________________
DriftingBrandon is offline   Reply With Quote
Reply

Bookmarks

Tags
comparison, guide, overfender, overfenders, s-chassis


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™