Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 05-18-2019, 01:08 AM   #1
venom_5
Zilvia Member
 
venom_5's Avatar
 
Join Date: May 2008
Location: Nashville, TN
Posts: 243
Trader Rating: (1)
venom_5 is an unknown quantity at this point
Feedback Score: 1 reviews
Bone Stock 1996 KA24DE Won't Start

So I have had my 1996 240SX SE with an automatic KA24DE for 10 years now, and about 3 years ago it started to develop an air leak that got worse and worse until it started affecting idle. So about 2 years ago, I parked the car at a friends house for him to repair the intake manifold gasket (the culprit of the leak). Otherwise, the car started up and ran fine and I drove it weekly.

Fast forward two years, and the intake manifold gasket was replaced a couple of weeks ago and now all of this is happening and the car wont start:

> Car will crank, but does not fire - based on pulling a spark plug and using the ole screwdriver trick, its not getting any ignition
> IACV (i think) makes a super loud ticking noise from the back of the engine
> OBD-II port gives power to a scanner but the scanner cannot make any connection
> Used a noid light today on one of the injectors with no response, so may not be getting distributor signal to ignition OR fuel
> Attempted to use a voltage probe for the 2-pin and 6-pin connectors on the dizzy, the 2-pin connector is showing 11.6V on the red/black wire, i was told to test the white/black wire on the 6-pin connector for 12V but i was only getting like 2V with the key in the on position (i believe this is pin # 2 out of the 6)
> There is a strange clicking coming from under the dashboard when you turn the key and the car is trying to start

It is also worth noting that the car has a Viper alarm system, i thought maybe that could have some feature that kills ignition but wouldn't explain the rest of it

Any Ideas?
__________________
RIP: 95 "Slamry" | Welcome: "Blurple" 96 240SX SE
venom_5 is offline   Reply With Quote
Sponsored Links
Old 05-18-2019, 11:16 AM   #2
anthony_240
Zilvia Junkie
 
anthony_240's Avatar
 
Join Date: Nov 2016
Location: Los Angeles
Age: 30
Posts: 489
Trader Rating: (3)
anthony_240 is an unknown quantity at this point
Feedback Score: 3 reviews
Bone Stock 1996 KA24DE Won't Start

Viper alarms usually do have a kill switch. If you find the wiring to it, and the wiring has a relay built in with two thick wires, that’s your kill switch. Can’t recall the color they use, I wanna say orange / green

No connection to your Ecu, no spark and no fuel tells me it might be your eccs relay located behind the ecu. When that relay takes a shit, you will get the symptoms above. Good luck


Sent from my iPhone using Tapatalk
anthony_240 is offline   Reply With Quote
Old 05-18-2019, 10:09 PM   #3
OutlawLui
Zilvia FREAK!
 
OutlawLui's Avatar
 
Join Date: Apr 2011
Location: Anaheim CA
Age: 35
Posts: 1,491
Trader Rating: (19)
OutlawLui is a well-known jackass
Feedback Score: 19 reviews
Did you ever change the fuel in the tank when you tried to start again?

Sounds like might be a relay problem. Try a different ECU as well
__________________
.
OutlawLui is offline   Reply With Quote
Old 05-19-2019, 12:49 AM   #4
Standard
Zilvia Addict
 
Join Date: Apr 2014
Location: Milwaukee
Age: 31
Posts: 810
Trader Rating: (11)
Standard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud ofStandard has much to be proud of
Feedback Score: 11 reviews
^dont start there

No connection at obd2 port, no fuel or spark. Most definitely sounds like a security related issue. Focus on your alarm system!!
Standard is offline   Reply With Quote
Old 05-28-2019, 12:31 PM   #5
venom_5
Zilvia Member
 
venom_5's Avatar
 
Join Date: May 2008
Location: Nashville, TN
Posts: 243
Trader Rating: (1)
venom_5 is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Standard View Post
^dont start there

No connection at obd2 port, no fuel or spark. Most definitely sounds like a security related issue. Focus on your alarm system!!
Do you have any experience with Viper 1-way systems and what I might need to do to disable it without having to pull the whole system out? Or an easy way to check if thats whats causing it not to start?

I have toggled the valet switch and tried both ways, i havent tried the remote start option yet though.
__________________
RIP: 95 "Slamry" | Welcome: "Blurple" 96 240SX SE
venom_5 is offline   Reply With Quote
Old 05-28-2019, 03:14 PM   #6
anthony_240
Zilvia Junkie
 
anthony_240's Avatar
 
Join Date: Nov 2016
Location: Los Angeles
Age: 30
Posts: 489
Trader Rating: (3)
anthony_240 is an unknown quantity at this point
Feedback Score: 3 reviews
Quote:
Originally Posted by venom_5 View Post
Do you have any experience with Viper 1-way systems and what I might need to do to disable it without having to pull the whole system out? Or an easy way to check if thats whats causing it not to start?



I have toggled the valet switch and tried both ways, i havent tried the remote start option yet though.


I already gave you the answer to it. Find the relay, and reconnect your oem wires without the relay. That’s how you disable it


Sent from my iPhone using Tapatalk
anthony_240 is offline   Reply With Quote
Old 06-28-2019, 12:07 PM   #7
venom_5
Zilvia Member
 
venom_5's Avatar
 
Join Date: May 2008
Location: Nashville, TN
Posts: 243
Trader Rating: (1)
venom_5 is an unknown quantity at this point
Feedback Score: 1 reviews
Well this is silly, but worth noting in case anyone comes along....

It was the EGI fuse. I thought all of the fuses had been checked, but turns out just the inside ones were checked. The EGI 7.5A fuse underneath the hood was blown.

Car runs again
__________________
RIP: 95 "Slamry" | Welcome: "Blurple" 96 240SX SE
venom_5 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™