SOHC to DOHC 12v to coil nothing coming out - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Frankiejay420 · 03-18-2014, 08:54 PM

Ka24e to ka24de swap, has fuel but not getting spark.. 12 volts to the coil but nothing coming out.. what could it possible be? the ECU I got from the guy two weeks later hoping he didn't drop it or anything..

image.jpg

Attachment 68268

Attachment 68269

I did re pin the dash connector, water temp, tech, speedometer, a/c, ignition start signal and grounded the black wire to two ground wires from the actual plug..

Attachment 68270

Attachment 68271

Attachment 68273

Attachment 68274

Attachment 68275

Attachment 68276

Even bought another coil thinking the first one I just bought was a bad coil, should I try swapping ECU's? How can I use my DMM and test the dizzy? or CAS? Module? I know ima need to swap the tach if I want it to work, or do I need a dohc tach to complete the circuit or something because I see that same wire (tach) runs to the relay by my coil doesn't the coil have a pulse? well this is my first swap so bare with me please.. been searching and searching and seem to not find much..

Attachment 68272

Frankiejay420 · 03-18-2014, 08:57 PM

Please help... Been going crazy over this issue for the pasted few days.. Thanks

jr_ss · 03-18-2014, 09:46 PM

Dude, stop making multiple threads for the same shit. Also, give it atleast an hour before you bump your own thread asking for help. One more thing, none of your attachments work.

Frankiejay420 · 03-19-2014, 05:44 PM

Sorry about that bro, I'm new to this a bit confused lol.. How do I attach pictures??

03-18-2014, 08:54 PM	#1
Frankiejay420 Join Date: Mar 2014 Location: Corona CA Age: 25 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	SOHC to DOHC 12v to coil nothing coming out Ka24e to ka24de swap, has fuel but not getting spark.. 12 volts to the coil but nothing coming out.. what could it possible be? the ECU I got from the guy two weeks later hoping he didn't drop it or anything.. image.jpg Attachment 68268 Attachment 68269 I did re pin the dash connector, water temp, tech, speedometer, a/c, ignition start signal and grounded the black wire to two ground wires from the actual plug.. Attachment 68270 Attachment 68271 Attachment 68273 Attachment 68274 Attachment 68275 Attachment 68276 Even bought another coil thinking the first one I just bought was a bad coil, should I try swapping ECU's? How can I use my DMM and test the dizzy? or CAS? Module? I know ima need to swap the tach if I want it to work, or do I need a dohc tach to complete the circuit or something because I see that same wire (tach) runs to the relay by my coil doesn't the coil have a pulse? well this is my first swap so bare with me please.. been searching and searching and seem to not find much.. Attachment 68272

03-18-2014, 09:46 PM	#3
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	Dude, stop making multiple threads for the same shit. Also, give it atleast an hour before you bump your own thread asking for help. One more thing, none of your attachments work. __________________ My SR20VET

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-18-2014, 08:57 PM	#2
Frankiejay420 Join Date: Mar 2014 Location: Corona CA Age: 25 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Please help... Been going crazy over this issue for the pasted few days.. Thanks

03-19-2014, 05:44 PM	#4
Frankiejay420 Join Date: Mar 2014 Location: Corona CA Age: 25 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Sorry about that bro, I'm new to this a bit confused lol.. How do I attach pictures??