Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 07-25-2004, 01:31 PM   #1
nissan_drifter
BANNED
 
Join Date: Jul 2004
Location: Oak Park, CA
Posts: 47
Trader Rating: (0)
nissan_drifter is an unknown quantity at this point
Feedback Score: 0 reviews
Need Power Steering Help

I got into an accident a while back, and the front right of my 1998 240sx was jacked, so I just get it back today after they replaced the: right- hub, LCA, strut rod, rod link, strut, steering gear+linkage, outer/inner tie rod, knuckle, tension arm, lower link. So all the other work plus the paint and alignment , body work was done. When I drove it there the power steering worked, and it worked even though both wheels were turned opposite directions, Now, the steering wheel is stiff and hard to turn, plus it wont auto-center itself, I checked the PS fluid level and it seems fine, also Im not seeing any leaks anywhere in teh ps lines, so if you could help me out it would be most appreciated, I dont want to have to go in and use my warantee bs, I lost my car for 3 weeks, and I dont want to have to lose it for more time while they take their time fixing it. Please, any help
nissan_drifter is offline   Reply With Quote
Sponsored Links
Old 07-25-2004, 03:53 PM   #2
mrmephistopheles
Inactive Admin
 
mrmephistopheles's Avatar
 
Join Date: Mar 2002
Location: BFE
Age: 19
Posts: 14,334
Trader Rating: (9)
mrmephistopheles has disabled reputation
Feedback Score: 9 reviews
you could have air in your lines
jack up your front end, turn your car on, and turn the wheel from lock to lock (all the way left to all the way right) about 25 times, then drop it back down and see if you still have a problem.
As far as the wheel being centered, any halfassed intelligent alignment guy could make sure your wheel is straight (which is how it's supposed to be after an alignment. Take it back.

PS. if this was paid for by insurance claim, complain to your insurance agency and complain to the shop manager. It may take alot of persuasion on your part, but makgic can happen.

-Kevin
mrmephistopheles is offline   Reply With Quote
Old 07-25-2004, 05:19 PM   #3
nissan_drifter
BANNED
 
Join Date: Jul 2004
Location: Oak Park, CA
Posts: 47
Trader Rating: (0)
nissan_drifter is an unknown quantity at this point
Feedback Score: 0 reviews
I am going to try that right now, thanx, I hope it works
nissan_drifter is offline   Reply With Quote
Old 07-25-2004, 05:56 PM   #4
nissan_drifter
BANNED
 
Join Date: Jul 2004
Location: Oak Park, CA
Posts: 47
Trader Rating: (0)
nissan_drifter is an unknown quantity at this point
Feedback Score: 0 reviews
still have the problem, moved it back and forth 50 times from lock to lock, and its still very very stiff, also, when Im driving, and I turn the wheel at all, it stays where I put it and wont move back at all, unless Im near the locked position, then it centers a little bit but wont go all the way, need help, Im going to try to take it back to the shop tomarrow, cause they have a 1 year warantee on mechanical stuff, but from what I saw when I jacked up the car it looks pretty normal. Im so lost
nissan_drifter is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™