|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
|
Thread Tools | Display Modes |
04-17-2008, 01:15 PM | #1 |
Leaky Injector
|
Wiring Problem
I have a 1993 coupe that i built a ka24de-t for, last week i put the motor in but have run into a problem I have no fuel or spark.
I pretty much figured it was something with the computer because everything runs from the ECU, my problem is when i turn the key to acc, the little red LED inside doesn't light up, no even on diagnostic mode. i found a pin out diagram on the internet and checked all the power wires, and they all have good power except the ECU relay wire has only 8 volts (not sure if it is supposed to have the full 12 or not) but the little LED still does not come on. If i take the test light and touch the fuel pump pin the fuel pump will kick on, which doesn't make any sense to me does anyone know where the ECU gets it main power from?
__________________
|
Sponsored Links |
04-22-2008, 03:11 PM | #3 | |
Leaky Injector
Join Date: Mar 2008
Location: Pennsylvania
Age: 36
Posts: 72
Trader Rating: (0)
Feedback Score: 0 reviews
|
Quote:
careful what you are stabbing on your ecu with a test light, you should throw out the tester and get a multi-meter first of all, I can get you wiring diagrams tomorrow when I get to work, if you can wait
__________________
minitrucker - 240 addict, now how to combine them? |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|