sr22det twin scroll gt3076r .82 build - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Pinggg · 11-24-2011, 02:42 PM

Have you ran the car with the Ethalpy tune before, how is it?
i just sent mine in a few days ago for my build also but i'm going iwth e85.

idahotuner · 11-24-2011, 07:30 PM

i have had two tunes by him already and both ran great. so i dont expect less from this one

idahotuner · 11-27-2011, 11:23 PM

what ya guys think. it would be centered up and down and side to side?

goal is to have it fired up by the end of the week

tabasco122 · 11-28-2011, 12:34 AM

no lol 10char

jr_ss · 11-28-2011, 04:30 AM

Yeah, I'm going to have to say no as well. It's not a Datsun...

idahotuner · 11-28-2011, 12:33 PM

haha yeah, thats the consensus, i just found it and set in there.

idahotuner · 12-21-2011, 07:25 PM

We'll got my manifold and down pipe. And waste gate and dump tube on. Just got to tighten down the turbo bolts now and bolt intercooler piping up. Fill the fluids and fire it up!

idahotuner · 01-09-2012, 11:19 PM

got alot of stuff done today, exhaust all bolted on, intercooler piping all bolted up and pressure tested for vacuum leaks and boost leaks, intake and maf all bolted up.

I had a weird thing happen, the ground wire on my maf, the wire you dont use from the z32 maf to the sr harness, that you typically ground to the chassi had a melt down, when i went to prime the fuel lines, all i have done is lengthen the wires for the maf, didnt change anything at all. so i cut the wire.

and this jw fuel rail is being a pain in the butt, my budy came over and we tried a bunch of different fuel rail bracket designs, went from one injetor leaking, to all 4, to 2. just getting the angle right, other then that i could fire it up, got some minor little things i got to do still but as soon as this injector problem is fixed, it will be fired up

4x4le · 01-18-2012, 03:55 PM

in for some dyno graphs hopefully sometime soon

idahotuner · 01-27-2012, 05:54 PM

THE 240 starts! just got to do a little fuel pressure adjustment, as it was running 11.3 AFR, and need to set spark timing, broke a stupid coil pack bolt off, so i got to ez out it, and get a new one. damn does the turbo sound sexy, sorry no video yet, i was to busy being excited!

idahotuner · 02-04-2012, 12:56 PM

well after realizing the fuel was bad, i now have her firing up again. i may need a new coil pack though. but she is starting atleast. i need to readjust the cas timing now. then see if we can get a video uploaded

Pinggg · 02-04-2012, 02:16 PM

Quote:

Originally Posted by idahotuner

well after realizing the fuel was bad, i now have her firing up again. i may need a new coil pack though. but she is starting atleast. i need to readjust the cas timing now. then see if we can get a video uploaded

i got a set of coilpacks ill sell you. let me know!

di-devol · 02-04-2012, 11:28 PM

Quote:

Originally Posted by idahotuner

well after realizing the fuel was bad, i now have her firing up again. i may need a new coil pack though. but she is starting atleast. i need to readjust the cas timing now. then see if we can get a video uploaded

Awesome, I'm glad it was as easy as bad gas lol.

idahotuner · 02-14-2012, 07:08 PM

engine bay just about ready to go, just got to mount the AVCR silanoid.

sexy turbo, i am wondering if the turbo setup can rev out to 9000 because i am thinking about doing solid lift cams in the future.

what better use for a washington lisence plate

as a splash sheild for my intake

and here is how it looks on the inside

rear suspension needs adjusted a little more

idahotuner · 02-14-2012, 07:11 PM

also mounted this around my fender hole so it doesnt rub through the intercooler piping

idahotuner · 02-22-2012, 05:29 PM

mounted avcr silanoid under bmc to keep the vacuum lines as short as possible. And it will be on the back side of the heat sheild to protect it. fan wiring corrected, and the defi controller mounted and regrounded, fumes in the shop forced me to leave because i am urethaning a log bed i made for my wife and i

idahotuner · 04-09-2012, 08:56 PM

Well got her running and took her for a drive. Pumpped the bad fuel out. Put 5 gallons 92 in. Then it sat for about a month while I went to school. Came back ordered a z32 Isis maf. Got 5 gallons from our tank of 87 and she fired up. So when I drove it into town I took it easy. It had 93+87 mix so like 89 in the tank but 92 in the line. I was just going about 25% throttle never wot. 10 psi came on clean and strong for about 8 mins and damn the wastegate sounds harass when it opens up. Only twelve inch dump pipe. But when the 92 was burnt out of the lines and the 87+92 mix kicked in as soon as it hit boost I felt it retard timing as soon as hit hit any boost. Then when I topped it off with 100 I could tell it wasn't retarding. But it would miss right at 4 psi and just keep missing at anything above that. But at partial throttle still it pulled smooth off boost and up to 4 psi.

It actually hit 4 psi in 4 th gear at 3000 rpms and third gear it hit 4 psi at 3500 Rpms.

So I think some new coils. And cooler spark plugs. And a little timing adjustment should get it fixed.

Also its over heating while driving in and out of my 2 mile drive way under 15 MPH. But as soon as I get on the high way. It runs the normal temp. I might get a cooler thermostat. And the electric fans were working but now seem to be flaky. I know they are wired up right.

But normal to have some things to sort out which is normal.

But over all seems fine. Some good off boost power. But I am back to work. Four. Ten hour days 400 miles from home. So only get to mess with it on the weekends.

4x4le · 04-10-2012, 11:25 AM

any fuel that was in your line was out of the line and mixed with what was in your tank after less than 2 seconds of it running

idahotuner · 04-10-2012, 12:23 PM

Weird. Must have just not mixed well in the tank. Cause I got two good pulls then retarded timing until I got that 100 octane in.

4x4le · 04-10-2012, 12:45 PM

Took that long for your knock sensor to realize you were already doing damage

idahotuner · 04-10-2012, 03:22 PM

Strange. I was babying it to the 100 fill up. About 12 miles

idahotuner · 04-10-2012, 03:25 PM

I guess it probably was all of 10 secs

4x4le · 04-10-2012, 03:44 PM

well, I cannot wait to see some results either way.

idahotuner · 04-10-2012, 07:10 PM

Thanks. Its feels awesome even off Boost just reving to 3500 next u know your breaking 100. If I can get these issues resolved. I got a Dyno date the 29th. Found 100 octane for 5.30 a gallon though

4x4le · 04-10-2012, 08:07 PM

are you getting it at an airport?

idahotuner · 04-10-2012, 08:26 PM

Yep LOL. I need a funnel damn nozzle doesn't fit in my tank.

jr_ss · 04-10-2012, 08:35 PM

Make an adapter out of some plastic or a brass pipe...

idahotuner · 04-10-2012, 09:29 PM

Yeah I will figure it out.

idahotuner · 04-20-2012, 08:03 AM

spitfire coils and ngk9s on the way.

idahotuner · 04-27-2012, 10:05 AM

Well new plugs and split fire coils fixed the missing in boost. Pulls damn good now. Just got to get a crank case relief set up made. And depending on the weekend how it goes might hit up a mustangs Dyno for a low boost pull sunday

11-24-2011, 07:30 PM	#62
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	i have had two tunes by him already and both ran great. so i dont expect less from this one __________________ My Twin Scroll Gt30r Sr22det Build

11-27-2011, 11:23 PM	#63
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	what ya guys think. it would be centered up and down and side to side? goal is to have it fired up by the end of the week __________________ My Twin Scroll Gt30r Sr22det Build

11-28-2011, 04:30 AM	#65
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,056 Trader Rating: (34) Feedback Score: 34 reviews	Yeah, I'm going to have to say no as well. It's not a Datsun... __________________ My SR20VET

11-28-2011, 12:33 PM	#66
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	haha yeah, thats the consensus, i just found it and set in there. __________________ My Twin Scroll Gt30r Sr22det Build

12-21-2011, 07:25 PM	#67
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	We'll got my manifold and down pipe. And waste gate and dump tube on. Just got to tighten down the turbo bolts now and bolt intercooler piping up. Fill the fluids and fire it up! __________________ My Twin Scroll Gt30r Sr22det Build

11-24-2011, 02:42 PM	#61
Pinggg Zilvia FREAK! Join Date: Dec 2010 Location: Coconut Creek, Florida Age: 28 Posts: 1,255 Trader Rating: (22) Feedback Score: 22 reviews	Have you ran the car with the Ethalpy tune before, how is it? i just sent mine in a few days ago for my build also but i'm going iwth e85.

11-28-2011, 12:34 AM	#64
tabasco122 Zilvia Junkie Join Date: Feb 2011 Location: Houma, LA Age: 32 Posts: 321 Trader Rating: (5) Feedback Score: 5 reviews	no lol 10char

01-09-2012, 11:19 PM	#68
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	got alot of stuff done today, exhaust all bolted on, intercooler piping all bolted up and pressure tested for vacuum leaks and boost leaks, intake and maf all bolted up. I had a weird thing happen, the ground wire on my maf, the wire you dont use from the z32 maf to the sr harness, that you typically ground to the chassi had a melt down, when i went to prime the fuel lines, all i have done is lengthen the wires for the maf, didnt change anything at all. so i cut the wire. and this jw fuel rail is being a pain in the butt, my budy came over and we tried a bunch of different fuel rail bracket designs, went from one injetor leaking, to all 4, to 2. just getting the angle right, other then that i could fire it up, got some minor little things i got to do still but as soon as this injector problem is fixed, it will be fired up __________________ My Twin Scroll Gt30r Sr22det Build

01-18-2012, 03:55 PM	#69
4x4le Zilvia FREAK! Join Date: Nov 2008 Location: Manchester, Tn Posts: 1,253 Trader Rating: (1) Feedback Score: 1 reviews	in for some dyno graphs hopefully sometime soon

01-27-2012, 05:54 PM	#70
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	THE 240 starts! just got to do a little fuel pressure adjustment, as it was running 11.3 AFR, and need to set spark timing, broke a stupid coil pack bolt off, so i got to ez out it, and get a new one. damn does the turbo sound sexy, sorry no video yet, i was to busy being excited! __________________ My Twin Scroll Gt30r Sr22det Build

02-04-2012, 12:56 PM	#71
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	well after realizing the fuel was bad, i now have her firing up again. i may need a new coil pack though. but she is starting atleast. i need to readjust the cas timing now. then see if we can get a video uploaded __________________ My Twin Scroll Gt30r Sr22det Build

02-14-2012, 07:08 PM	#74
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	engine bay just about ready to go, just got to mount the AVCR silanoid. sexy turbo, i am wondering if the turbo setup can rev out to 9000 because i am thinking about doing solid lift cams in the future. what better use for a washington lisence plate as a splash sheild for my intake and here is how it looks on the inside rear suspension needs adjusted a little more __________________ My Twin Scroll Gt30r Sr22det Build

02-14-2012, 07:11 PM	#75
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	also mounted this around my fender hole so it doesnt rub through the intercooler piping __________________ My Twin Scroll Gt30r Sr22det Build

02-22-2012, 05:29 PM	#76
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	mounted avcr silanoid under bmc to keep the vacuum lines as short as possible. And it will be on the back side of the heat sheild to protect it. fan wiring corrected, and the defi controller mounted and regrounded, fumes in the shop forced me to leave because i am urethaning a log bed i made for my wife and i __________________ My Twin Scroll Gt30r Sr22det Build

04-09-2012, 08:56 PM	#77
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Well got her running and took her for a drive. Pumpped the bad fuel out. Put 5 gallons 92 in. Then it sat for about a month while I went to school. Came back ordered a z32 Isis maf. Got 5 gallons from our tank of 87 and she fired up. So when I drove it into town I took it easy. It had 93+87 mix so like 89 in the tank but 92 in the line. I was just going about 25% throttle never wot. 10 psi came on clean and strong for about 8 mins and damn the wastegate sounds harass when it opens up. Only twelve inch dump pipe. But when the 92 was burnt out of the lines and the 87+92 mix kicked in as soon as it hit boost I felt it retard timing as soon as hit hit any boost. Then when I topped it off with 100 I could tell it wasn't retarding. But it would miss right at 4 psi and just keep missing at anything above that. But at partial throttle still it pulled smooth off boost and up to 4 psi. It actually hit 4 psi in 4 th gear at 3000 rpms and third gear it hit 4 psi at 3500 Rpms. So I think some new coils. And cooler spark plugs. And a little timing adjustment should get it fixed. Also its over heating while driving in and out of my 2 mile drive way under 15 MPH. But as soon as I get on the high way. It runs the normal temp. I might get a cooler thermostat. And the electric fans were working but now seem to be flaky. I know they are wired up right. But normal to have some things to sort out which is normal. But over all seems fine. Some good off boost power. But I am back to work. Four. Ten hour days 400 miles from home. So only get to mess with it on the weekends. __________________ My Twin Scroll Gt30r Sr22det Build

04-10-2012, 11:25 AM	#78
4x4le Zilvia FREAK! Join Date: Nov 2008 Location: Manchester, Tn Posts: 1,253 Trader Rating: (1) Feedback Score: 1 reviews	any fuel that was in your line was out of the line and mixed with what was in your tank after less than 2 seconds of it running

04-10-2012, 12:23 PM	#79
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Weird. Must have just not mixed well in the tank. Cause I got two good pulls then retarded timing until I got that 100 octane in. __________________ My Twin Scroll Gt30r Sr22det Build

04-10-2012, 12:45 PM	#80
4x4le Zilvia FREAK! Join Date: Nov 2008 Location: Manchester, Tn Posts: 1,253 Trader Rating: (1) Feedback Score: 1 reviews	Took that long for your knock sensor to realize you were already doing damage

04-10-2012, 03:22 PM	#81
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Strange. I was babying it to the 100 fill up. About 12 miles __________________ My Twin Scroll Gt30r Sr22det Build

04-10-2012, 03:25 PM	#82
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	I guess it probably was all of 10 secs __________________ My Twin Scroll Gt30r Sr22det Build

04-10-2012, 03:44 PM	#83
4x4le Zilvia FREAK! Join Date: Nov 2008 Location: Manchester, Tn Posts: 1,253 Trader Rating: (1) Feedback Score: 1 reviews	well, I cannot wait to see some results either way.

04-10-2012, 07:10 PM	#84
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Thanks. Its feels awesome even off Boost just reving to 3500 next u know your breaking 100. If I can get these issues resolved. I got a Dyno date the 29th. Found 100 octane for 5.30 a gallon though __________________ My Twin Scroll Gt30r Sr22det Build

04-10-2012, 08:07 PM	#85
4x4le Zilvia FREAK! Join Date: Nov 2008 Location: Manchester, Tn Posts: 1,253 Trader Rating: (1) Feedback Score: 1 reviews	are you getting it at an airport?

04-10-2012, 08:26 PM	#86
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Yep LOL. I need a funnel damn nozzle doesn't fit in my tank. __________________ My Twin Scroll Gt30r Sr22det Build

04-10-2012, 08:35 PM	#87
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,056 Trader Rating: (34) Feedback Score: 34 reviews	Make an adapter out of some plastic or a brass pipe... __________________ My SR20VET

04-10-2012, 09:29 PM	#88
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Yeah I will figure it out. __________________ My Twin Scroll Gt30r Sr22det Build

04-20-2012, 08:03 AM	#89
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	spitfire coils and ngk9s on the way. __________________ My Twin Scroll Gt30r Sr22det Build

04-27-2012, 10:05 AM	#90
idahotuner Zilvia FREAK! Join Date: Jan 2008 Location: St. Maries, Idaho Age: 32 Posts: 1,276 Trader Rating: (17) Rides Gallery: idahotuner Feedback Score: 17 reviews	Well new plugs and split fire coils fixed the missing in boost. Pulls damn good now. Just got to get a crank case relief set up made. And depending on the weekend how it goes might hit up a mustangs Dyno for a low boost pull sunday __________________ My Twin Scroll Gt30r Sr22det Build

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode