Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 04-05-2019, 07:58 PM   #1
blindside73
 
Join Date: May 2018
Location: San Diego
Posts: 46
Trader Rating: (0)
blindside73 is an unknown quantity at this point
Feedback Score: 0 reviews
1991 240sx Consult Not working

I picked up a S13 240sx coupe which i manual swapped and the consult port isn't working (didn't work when it was auto either). I'm using Android NDS1 (also tried ECUTalk with no luck) with a USB 14-pin consult adapter. This set up does work on my 1996 S14 240sx.

Unsure of the wiring harness in the S13 so i went to junk yard to harvest some connectors. The ecu connector came from a 1991 sentra and consult came from a 98 sentra. I wanted to create a minimalist "harness" with only the consult port. I have it wired as follows:



Consult to ECU
ground to 48
clk to 14
rx to 7
tx to 15
CHK to 23
12v to 47

The consult fails to connect with the full harness in the car with either auto or MT ecu.
The diy harness fails to connect with the auto ecu (haven't tried with MT).



Any ideas why it's not working? Shouldn't my consult adapter work with both 240sx?
blindside73 is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™