s14 ls1

So i was looking around and i was wondering what ls cast iron headers will fit on my s14? im trying to go stock everything and try to make my ls smog legal in cali. yea i know alot will say you cant blah blah blah but if you do your research you would know you can but i wanted to know what ls cast iron exhaust manifold will fit in my car and i also wanna know if anyone knows how to run oem nissan vapor cansiter with a ls1 motor? thanks.

s14 ls1

heeeelp please i need an answer asap please

luck_y_777

C6 stock exhaust manifolds will fit and I think I heard gto ls2 headers will fit as well. But not 100% sure. Was thinking of doing a carb ls swap as well but it's going to be one hell of an undertaking. Good luck.

s14 ls1

Thanks bro and yea I do a lot of research on how to make it legal and it's actually not that hard just a lot of extra money haha but if you go through with it then good luck to you too


Sent from my iPhone using Tapatalk

rawgarage

Those headers are going to be tight Af....say goodbye to space

SR20PWRALTY

It isn't as easy as you think but doable. Unless you get the Erod package that comes with the carb sticker.

If you are also trying to use the evap system from a 240sx you have not done enough research. Ref will not allow you mismatching parts from different cars even if its the same family of engines. There is some flexibility in this if for some reason he can't find a part number and the part resembles the original part the Ref will pass it.

On an S14 I think I remember someone cutting up some corvette headers to fit. GTO headers fit with S13. Check out this forum for more info http://www.silviav8forums.com/forum/index.php

s14 ls1

iv done my research. if you read this article you will see that you can use nissan oem evap canister and still pass. this guy did it. and s13 and s14 ls swaps are basicaly the same exact parts basically. there are a couple of things you cant use which is common sense but the most part you can go off a s14 and still use same parts as that person.

s14 ls1

Ok thanks


Sent from my iPhone using Tapatalk

The Saint

FYI.

http://www.superstreetonline.com/how...s13-road-trip/

s14 ls1

I don't know what your trying to get at here?


Sent from my iPhone using Tapatalk

The Saint

Super street did a whole LS swap TECH you should read it all.
Cali legal too.

SR20PWRALTY

He was a member on here. S13 you need help with S14 and he bought the E-Rod package so you don't have to go to a ref you just go to a smog place with your carb number.

http://zilvia.net/f/showthread.php?t=385069

http://speed.academy/nissan-240sx-v8...w-to-part-1/2/

s14 ls1

Yea I seen his build that's why I'm trying to make this legal myself


Sent from my iPhone using Tapatalk

The Saint

It's a long read. but he went through the same stuff as you. And he is finished.
I am waiting for a 300zx LS swap kit for my daily driver, it's 25years old and 225k on the motor.

s14 ls1

You should build your own swap kit then sell it. You would make bank haha


Sent from my iPhone using Tapatalk

SR20PWRALTY

Which article? The one with the black s13? he has the E-Rod crate engine that came with a evap/charcoal canister its pictured on the bottom right.




You are right it could be possible to pass with the nissan canister if the ref some how over looks it or makes a mistake. The only problem is they check the systems to make sure they function with the OBD II port. If you some how wire up the nissan canister and use the LS1 sensor with the canister I guess but why go through all that trouble I would just use the LS canister.

S13_coday

The 2012 ls3 camaro headers would fit just sold mine

SR20PWRALTY

those would fit S14? With what mount kit or would you have to fabricate your own mounts.

SR20PWRALTY

http://www.silviav8forums.com/forum/...b0a7b0c0ec96e0

Found this, said he used stock 2001 manifolds

NISR20MO

I have seen stock C6 manifolds used before, on the drivers side you may need to space it out with a make your own header flange and a extra gasket.

SR20PWRALTY

I have personally used 2002 Camaro headers with some grinding on the exhaust flange and 2005 GTO headers on the passenger side only. Drivers side only got 2005 GTO to fit. This was all for S13.