Rb25 neo help!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

idrum2loud · 08-08-2014, 02:09 PM

I NEED SOME HELP!!! RB25 NEO

I had the standard hesitation issue from hot coil packs etc, so i took off my covers and insulated the bottom boots and put in new spark plugs...it had autolites...i put these in NGK BKR6EIX-11. Put back together, and it ran good. Drive to work and i noticed my gas was low...and then it dies....wont start. At this point i put gas in, still no start. Fuel pump sock was black, and fuel filter was dirty too. I noticed the fuel filter was on the return so i corrected that too. After a tow home today i took apart fuel rail and injectors TOOK FOREVER....i cleaned it all and cleaned injector screens....put back together and still nothing. I am stumped....i did nothing to cause this and have cleaned everything that could have been clogged. Could my sock be doing this to me? Any input would be amazing. Thanks!

l adam l · 08-08-2014, 10:09 PM

Did you make sure it was getting fuel. ..? Take off feed line turn key...if that's the case check and see if it's flooded and if it's not pull injectors out and look and see if they're misting.

MADE · 08-08-2014, 10:48 PM

Was the line to the fuel dampener and FPR installed correctly? Even a Nissan dealer has gotten them mixed up/

08-08-2014, 02:09 PM	#1
idrum2loud Join Date: Apr 2007 Location: Portsmouth VA Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	Rb25 neo help!!!!! I NEED SOME HELP!!! RB25 NEO I had the standard hesitation issue from hot coil packs etc, so i took off my covers and insulated the bottom boots and put in new spark plugs...it had autolites...i put these in NGK BKR6EIX-11. Put back together, and it ran good. Drive to work and i noticed my gas was low...and then it dies....wont start. At this point i put gas in, still no start. Fuel pump sock was black, and fuel filter was dirty too. I noticed the fuel filter was on the return so i corrected that too. After a tow home today i took apart fuel rail and injectors TOOK FOREVER....i cleaned it all and cleaned injector screens....put back together and still nothing. I am stumped....i did nothing to cause this and have cleaned everything that could have been clogged. Could my sock be doing this to me? Any input would be amazing. Thanks! __________________ getting old sucks

08-08-2014, 10:48 PM	#3
MADE Zilvia Addict Join Date: Jan 2006 Location: Norf Norf Posts: 974 Trader Rating: (1) Feedback Score: 1 reviews	Was the line to the fuel dampener and FPR installed correctly? Even a Nissan dealer has gotten them mixed up/ __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-08-2014, 10:09 PM	#2
l adam l Zilvia Member Join Date: Feb 2009 Location: Murfeesboro, TN Age: 33 Posts: 254 Trader Rating: (0) Feedback Score: 0 reviews	Did you make sure it was getting fuel. ..? Take off feed line turn key...if that's the case check and see if it's flooded and if it's not pull injectors out and look and see if they're misting.