New Version Drift Freaq Custom Urethane KA/SR/CA Engine Mounts : Round 4 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift freaq · 01-24-2011, 01:28 PM

These are our latest version of High durometer Polyurethane engine mounts. The mount bolts do not run straight through the Urethane .

This is done so as to prevent vibrational transfer that you would get with a straight through side to side stud.

We have also upgraded the durometer to 80 for even more shear strength and changed the color , per user requests to British Racing Green ( though the pic in the sun makes them look lighter. lol)

On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot (the industrial window caulking crap), which is inferior!

These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards.

They have been track tested and run on many cars.

The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top.

There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539...ml#post3845752

It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo!

UPDATE TIME: ROUND 4. is now officially going.

UPDATE !! Its OFFICIAL we are starting the list for the Transmission mount group buy as well. It will be $85 we will need 5 people. It will have a bracket for the exhaust hanger. There will be a 3-4 week lead time from when the 5 people pay, this is for initial run production.

The Group buy price on the Engine Mounts is $115 per set with $15 for shipping anywhere in the continental U.S. For 5 people.

I decided to add this. If you do not care about the discount you can buy immediately at the $120 per set price which means $135 shipped.

STOP THE PRESSES! Ok I have a special for all of you wanting to save money. We have a limited number of Yellow's with centered studs. I forgot about these they were sitting in a box.

I am going to offer these at $100 a set with a minimum buy in of 5 people. $115 shipped!

If you want to buy them outright it will be $110 a set. Of course the deal is in the $100 a set.

This will be a one time only situation as soon as I run out that is it. No more Yellows and no more Yellows at this special price.
So if you want to get them and save some money buy now.

my paypal is [email protected]

chiboy002 · 01-24-2011, 06:55 PM

1. chiboy
2.
3.
4.
5.
6.
7.
8.
9.
10.

TropikalSX · 01-24-2011, 10:40 PM

Count me in. Thanks

1. chiboy
2. TropikalSX
3.
4.
5.
6.
7.
8.
9.
10.

chiprez · 01-25-2011, 11:22 PM

im in!

1. chiboy
2. TropikalSX
3. chiprez
4.
5.
6.
7.
8.
9.
10.

would i be able to pre pay to get them at this price?

drift freaq · 01-26-2011, 12:07 AM

Quote:

Originally Posted by chiprez

im in!

1. chiboy
2. TropikalSX
3. chiprez
4.
5.
6.
7.
8.
9.
10.

would i be able to pre pay to get them at this price?

you mean not wait till there are 10 people? I mean you can paypal now but to get the $110 plus $15 shipping price? I won't ship till I have ten people.

Seriously though I posted this up yesterday at lunch time and we already have 3 people at this rate we could possibly pull 10 by the end of the week.

twin240s · 01-26-2011, 12:49 AM

** Edit **

godrifttoday · 01-26-2011, 02:45 AM

Quote:

Originally Posted by twin240s

yall r stupid if you buy that. he made that shit for like 10 bucks. you can do the same. go to any hardware store

Your the one that sounds stupid.... No thread shitting! U haven't calculated labor, time to go buy material, type of material ( no homedepot, window urethane), the capacity of people having the know how, a proper jig, he doesn't use a straight bolt design! So its a little more complicated than u might think... Not to say its not rocket science but to some it is... So before u go opening your mouth next time, think please.

GSXRJJordan · 01-26-2011, 12:31 PM

I love that you're making these again Dave!

chiprez · 01-26-2011, 11:30 PM

Come on people don't sleep on this!

chiboy002 · 01-27-2011, 03:26 PM

you should do some kinda logo embedded into them, so people don't buy a bunch and sell them for more and steal your work.

hopefully the 10 is met soon

DreamN · 01-27-2011, 03:38 PM

Color just got worse lol

Still want a set though. You know what count me in Dave. I'll pay cash too.

drift freaq · 01-27-2011, 05:52 PM

1. chiboy
2. TropikalSX
3. chiprez
4. DreamN
5.
6.
7.
8.
9.
10.

step up step up 6 more people and we can roll this fast.

chiboy002 · 01-29-2011, 12:45 AM

yeah i don't like that color tbh, wrap in heat foil and i'm 'golden'

drift freaq · 01-29-2011, 12:10 PM

ok we are going to a special to spice things up. 5 people and the price will be $115 a set. unless they want to wait for ten at $110.

chiprez · 01-29-2011, 07:50 PM

$5 don't make a differance but I gotta wait for thursday for payday.So it would be $115 +$35shipping?

Mister.E · 01-29-2011, 08:55 PM

any plans in the works to make a tranny mount and sell a whole set? also, i know you said that you can lower the engine with them, but is it possible to install them so that the engine retains its stock height or at least close to it?

drift freaq · 01-29-2011, 09:07 PM

Quote:

Originally Posted by E Double

any plans in the works to make a tranny mount and sell a whole set? also, i know you said that you can lower the engine with them, but is it possible to install them so that the engine retains its stock height or at least close to it?

if enough people stepped forward willing to commit? Then yes I would do a trans mount. Its easy for people to say they will buy it if I make it. Fact is the only way I am going to make it is If I get at least 10 people to commit to actually buying it and paying for it.
Costs money to make a jig, do a prototype and make a setup run. I did not do a trans mount in the past because I came to the conclusion that it would not be cheap. I was not even sure people would buy it.

As far as positioning your engine height goes, you do have room to play with that by flipping them around and whatnot. Most people want the mounts to lower the engine slightly.

I have never had anyone say or complain that mounts lowered their engine to much.

chiboy002 · 01-29-2011, 09:59 PM

Quote:

Originally Posted by drift freaq

As far as positioning your engine height goes, you do have room to play with that by flipping them around and whatnot. Most people want the mounts to lower the engine slightly.

I have never had anyone say or complain that mounts lowered their engine to much.

although the lower center of grav would be epic, im just worried about my oil pan getting banged through my skid plate or my grain plug scraping away. How low does it sit, do you know?

Quote:

Originally Posted by E Double

any plans in the works to make a tranny mount and sell a whole set?

i would be down - could we do like a rebate or something... show proof of buying an engine mount within 1 year of trans mount being made and get a "package" deal? I just don't want to wait on 10 more people to man up - i need a trans mount soon

phaiwezzie · 01-29-2011, 10:35 PM

zing!

1. chiboy
2. TropikalSX
3. chiprez
4. DreamN
5. phaiwezzie
6.
7.
8.
9.
10.

drift freaq · 01-29-2011, 11:48 PM

Quote:

Originally Posted by chiboy002

although the lower center of grav would be epic, im just worried about my oil pan getting banged through my skid plate or my grain plug scraping away. How low does it sit, do you know?

i would be down - could we do like a rebate or something... show proof of buying an engine mount within 1 year of trans mount being made and get a "package" deal? I just don't want to wait on 10 more people to man up - i need a trans mount soon

it does not lower the pan below the crossmember. I have stated before it can drop the engine around 1/2 inch to an inch but it does not put the pan below the crossmember so you really have nothing to worry about.

As far as rebates go. I am not a big corporation. I cannot do rebates.

Like I said before if ten people can pony up for the trans mount then I can do it and start selling trans mounts as well. Though initially I would need to do a 10 piece run minimum and there is no way around that.

we now have 5 people if you guys want to go at the 5 people at $115 price we can do it. so that would be $130 shipped.

[email protected] · 01-30-2011, 04:19 AM

These look sexy =)

I would def buy a set if I still owned an SR

chiboy002 · 01-30-2011, 09:29 AM

Quote:

Originally Posted by drift freaq

it does not lower the pan below the crossmember. I have stated before it can drop the engine around 1/2 inch to an inch but it does not put the pan below the crossmember so you really have nothing to worry about.

As far as rebates go. I am not a big corporation. I cannot do rebates.

Like I said before if ten people can pony up for the trans mount then I can do it and start selling trans mounts as well. Though initially I would need to do a 10 piece run minimum and there is no way around that.

we now have 5 people if you guys want to go at the 5 people at $115 price we can do it. so that would be $130 shipped.

oh ok thank god

and not rebate but like a discount if we recently bought them. Nothing would be mailed in lol... it was just a thought - if not i can man up and pay the price

drift freaq · 01-30-2011, 11:46 AM

Quote:

Originally Posted by chiboy002

oh ok thank god

and not rebate but like a discount if we recently bought them. Nothing would be mailed in lol... it was just a thought - if not i can man up and pay the price

Well we could start a list for transmission mounts. As far as the engine mounts go since the current group of people are completely gung ho to get them now. We are going to do the current group of 5 at $115. So start sending in your money guys and as soon as the 5 of you have paid the mounts will be shipped.

$115+15 shipping

paypal is
[email protected]

Jay97240Sx · 01-30-2011, 03:28 PM

Will I be able to modify these mounts to drop the engine another 1/4 inch by cutting or shaving some material off ? I have circuit sport mounts and I want to swap them out asap, they are shaking the shit out of my car.

drift freaq · 01-30-2011, 03:41 PM

Quote:

Originally Posted by Jay97240Sx

Will I be able to modify these mounts to drop the engine another 1/4 inch by cutting or shaving some material off ? I have circuit sport mounts and I want to swap them out asap, they are shaking the shit out of my car.

you can change the height by rotating the mounts. Its not possible to trim some off them. LOL

You should not have a problem achieving a 1/4 inch drop it just takes some playing around with the positioning of them.

Jay97240Sx · 01-30-2011, 04:59 PM

The reason I ask this is because I had to remove about a 1/2 inch from my circuit sports so that my turbo could clear my hood. I wanted to use Ur mounts plus jgy engine brackets. Just incase I needed alittle more clearance I was hoping I could remove some material.

chiprez · 01-30-2011, 05:55 PM

Ill send my payment in on Thursday.

I'd be down for a trans mount if I hadent already just bought a nismo tranny mount.next time I guess

drift freaq · 01-30-2011, 06:27 PM

Quote:

Originally Posted by Jay97240Sx

The reason I ask this is because I had to remove about a 1/2 inch from my circuit sports so that my turbo could clear my hood. I wanted to use Ur mounts plus jgy engine brackets. Just incase I needed alittle more clearance I was hoping I could remove some material.

Like I said earlier and has been stated my mounts lower your engine 1/2 inch to an inch. So I do not see a problem with you clearing your hood.

Jay97240Sx · 01-30-2011, 07:50 PM

Great will pick this up my next pay cheque

LaSuperSlow · 01-30-2011, 08:05 PM

hmmmm if the group buy is still up by friday count me in... btw is the warranty 3 months, 6 months, or 1 year? I know they last a long time but i was just wondering

01-24-2011, 01:28 PM	#1
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	New Version Drift Freaq Custom Urethane KA/SR/CA Engine Mounts : Round 4 These are our latest version of High durometer Polyurethane engine mounts. The mount bolts do not run straight through the Urethane . This is done so as to prevent vibrational transfer that you would get with a straight through side to side stud. We have also upgraded the durometer to 80 for even more shear strength and changed the color , per user requests to British Racing Green ( though the pic in the sun makes them look lighter. lol) On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot (the industrial window caulking crap), which is inferior! These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards. They have been track tested and run on many cars. The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top. There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539...ml#post3845752 It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo! UPDATE TIME: ROUND 4. is now officially going. UPDATE !! Its OFFICIAL we are starting the list for the Transmission mount group buy as well. It will be $85 we will need 5 people. It will have a bracket for the exhaust hanger. There will be a 3-4 week lead time from when the 5 people pay, this is for initial run production. The Group buy price on the Engine Mounts is $115 per set with $15 for shipping anywhere in the continental U.S. For 5 people. I decided to add this. If you do not care about the discount you can buy immediately at the $120 per set price which means $135 shipped. STOP THE PRESSES! Ok I have a special for all of you wanting to save money. We have a limited number of Yellow's with centered studs. I forgot about these they were sitting in a box. I am going to offer these at $100 a set with a minimum buy in of 5 people. $115 shipped! If you want to buy them outright it will be $110 a set. Of course the deal is in the $100 a set. This will be a one time only situation as soon as I run out that is it. No more Yellows and no more Yellows at this special price. So if you want to get them and save some money buy now. my paypal is [email protected] __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html Last edited by drift freaq; 01-24-2011 at 01:44 PM.. Reason: sizing

01-24-2011, 06:55 PM	#2
chiboy002 Post Whore! Join Date: Mar 2010 Location: ◙ Posts: 4,416 Trader Rating: (21) Feedback Score: 21 reviews	1. chiboy 2. 3. 4. 5. 6. 7. 8. 9. 10. __________________ street dancer. Last edited by chiboy002; 01-24-2011 at 07:06 PM.. Reason: i derped

01-26-2011, 12:49 AM	#6
twin240s Leaky Injector Join Date: Apr 2010 Location: Biloxi, MS Age: 37 Posts: 91 Trader Rating: (0) Feedback Score: 0 reviews	Edit Last edited by Drift N Dragg; 01-26-2011 at 11:26 AM..

01-26-2011, 12:31 PM	#8
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	I love that you're making these again Dave! __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

01-27-2011, 03:26 PM	#10
chiboy002 Post Whore! Join Date: Mar 2010 Location: ◙ Posts: 4,416 Trader Rating: (21) Feedback Score: 21 reviews	you should do some kinda logo embedded into them, so people don't buy a bunch and sell them for more and steal your work. hopefully the 10 is met soon __________________ street dancer.

01-24-2011, 10:40 PM	#3
TropikalSX Join Date: Mar 2005 Location: Tampa, FL Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Count me in. Thanks 1. chiboy 2. TropikalSX 3. 4. 5. 6. 7. 8. 9. 10.

01-25-2011, 11:22 PM	#4
chiprez Join Date: Sep 2008 Location: Vancouver,Wa Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	im in! 1. chiboy 2. TropikalSX 3. chiprez 4. 5. 6. 7. 8. 9. 10. would i be able to pre pay to get them at this price?

01-26-2011, 11:30 PM	#9
chiprez Join Date: Sep 2008 Location: Vancouver,Wa Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Come on people don't sleep on this!

01-27-2011, 03:38 PM	#11
DreamN Post Whore! Join Date: Nov 2006 Location: SoCal - 818 Age: 36 Posts: 10,691 Trader Rating: (54) Rides Gallery: DreamN Feedback Score: 54 reviews	Color just got worse lol Still want a set though. You know what count me in Dave. I'll pay cash too. __________________ - Jimmy Wanted: TBD For Sale: TBD

01-27-2011, 05:52 PM	#12
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	1. chiboy 2. TropikalSX 3. chiprez 4. DreamN 5. 6. 7. 8. 9. 10. step up step up 6 more people and we can roll this fast. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

01-29-2011, 12:45 AM	#13
chiboy002 Post Whore! Join Date: Mar 2010 Location: ◙ Posts: 4,416 Trader Rating: (21) Feedback Score: 21 reviews	yeah i don't like that color tbh, wrap in heat foil and i'm 'golden' __________________ street dancer.

01-29-2011, 12:10 PM	#14
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	ok we are going to a special to spice things up. 5 people and the price will be $115 a set. unless they want to wait for ten at $110. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

01-29-2011, 07:50 PM	#15
chiprez Join Date: Sep 2008 Location: Vancouver,Wa Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	$5 don't make a differance but I gotta wait for thursday for payday.So it would be $115 +$35shipping?

01-29-2011, 08:55 PM	#16
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 36 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	any plans in the works to make a tranny mount and sell a whole set? also, i know you said that you can lower the engine with them, but is it possible to install them so that the engine retains its stock height or at least close to it?

01-29-2011, 10:35 PM	#19
phaiwezzie Leaky Injector Join Date: Oct 2006 Location: IL Posts: 108 Trader Rating: (3) Feedback Score: 3 reviews	zing! 1. chiboy 2. TropikalSX 3. chiprez 4. DreamN 5. phaiwezzie 6. 7. 8. 9. 10.

01-30-2011, 04:19 AM	#21
[email protected] Advertiser Join Date: Dec 2010 Location: Los Angeles, CA (91423) Age: 31 Posts: 478 Trader Rating: (87) Feedback Score: 87 reviews	These look sexy =) I would def buy a set if I still owned an SR __________________ LIKE 9K Racing On Facebook for discount and product updates. http://www.facebook.com/9KRacing Contact 9K racing for any of your tuning or modifying needs.

01-30-2011, 03:28 PM	#24
Jay97240Sx Leaky Injector Join Date: Jan 2009 Location: Fort Lauderdale Age: 41 Posts: 57 Trader Rating: (2) Feedback Score: 2 reviews	Will I be able to modify these mounts to drop the engine another 1/4 inch by cutting or shaving some material off ? I have circuit sport mounts and I want to swap them out asap, they are shaking the shit out of my car.

01-30-2011, 04:59 PM	#26
Jay97240Sx Leaky Injector Join Date: Jan 2009 Location: Fort Lauderdale Age: 41 Posts: 57 Trader Rating: (2) Feedback Score: 2 reviews	The reason I ask this is because I had to remove about a 1/2 inch from my circuit sports so that my turbo could clear my hood. I wanted to use Ur mounts plus jgy engine brackets. Just incase I needed alittle more clearance I was hoping I could remove some material.

01-30-2011, 05:55 PM	#27
chiprez Join Date: Sep 2008 Location: Vancouver,Wa Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Ill send my payment in on Thursday. I'd be down for a trans mount if I hadent already just bought a nismo tranny mount.next time I guess

01-30-2011, 07:50 PM	#29
Jay97240Sx Leaky Injector Join Date: Jan 2009 Location: Fort Lauderdale Age: 41 Posts: 57 Trader Rating: (2) Feedback Score: 2 reviews	Great will pick this up my next pay cheque

01-30-2011, 08:05 PM	#30
LaSuperSlow Join Date: Sep 2010 Location: Alton, TX Posts: 8 Trader Rating: (0) Feedback Score: 0 reviews	hmmmm if the group buy is still up by friday count me in... btw is the warranty 3 months, 6 months, or 1 year? I know they last a long time but i was just wondering

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode