doyle4281

Hello everyone, Ive decided to begin parting out my RB25DET Kouki S14. It was nut and bolt build to a pretty high specification, very thorough. The car was finished up to the point of paint and body, ran and drove, but never hit the road. Ive begun dismantling in modules, and will first offer for sale in this manner. If there isnt any interest in that, I will begin piecing out. If you want information on something not listed or want to call dibs on something, just message me. Located in Central New Jersey, 08817. Ill start with Suspension and body.

Suspension/Brakes

This suspension/brake setup has been dismantled and will now be offered in separate pieces. Ill update with pictures and prices over the weekend.

Everything was removed in a way that it can be installed very quickly and easily. Its basically everything underneath an S14, from brake house to wheel studs. Every surface is powder coated or painted, every bolt has been replaced or upgraded. This took about 2 hours to remove from the car. Im listing this all together, as there is a lot of custom powder coating to make everything match. This is essentially a bolt in show car suspension/brake package in the easiest way possible. This entire setup can be installed in less than a day, every nut and bolt is included. Please read through the specifications. This is a build thread I made years ago, pretty thorough and shows most of what went into the suspension portion of the build. Tons of labor, powder coating, painting, burning, stripping, esc, esc.

https://zilvia.net/f/showthread.php?t=340727


EBAY strut brace not included, only for holding up suspension

Front/Rear

APEXi N1 EXV Coilovers (new)


Front:

---OEM lower control arms-----------------------------------SOLD
Energy Suspension bushings (new)
Moog ball joints (new)
Powder coated (silver)
---S14 knuckle---------------------------------------------------SOLD
Powder coated (matte black)
---5 lug hubs (painted silver)------------------------------------AVAILABLE
---Yamato garage tension rod (QA1 rod ends) (new)-----------------------------------SOLD
Powder coated (ruby pearl)
BallerBolts 12 point zinc plated bolts (arm to control arm) (new)----------------SOLD
OEM Bolts (NEW) (Arm to body) -----------------------------------------------------SOLD
---OEM Strut to Knuckle bolts (new) ---------------------------------------------SOLD


Rear:

---OEM S14 subframe -----------------------------------------SOLD
Painted (gunmetal)
Energy Suspension bushings (new)
---J30 limited slip differential (Final Drive 3.9)——————-SOLD
Redline fluid (fresh) (new)
---S14 axles (cosmetic restoration)————————————SOLD
Ballerbolts (axle to diff) (new)--------------------------SOLD
---S14 Knuckles -----------------------------------------------SOLD
Custom powder coated (black)
Energy Suspension bushings (new)
---Z32 handbrake assembly -------------------------------------SOLD
Powder coated backing plate (gloss black)
---R33 Skyline GTS handbrake cables (the proper cables for Z32 conversion)----------------SOLD
---5 lug hubs------------------------------------AVAILABLE
Painted (silver)
---OEM lower control arm -------------------------------------SOLD
Powder coated (silver)
Moog ball joint (new)
Energy Suspension bushings (new)
---Yamato rear upper arm (new)--------------------------------SOLD
Custom powder coat (ruby pearl)
---Yamato toe control rod (new)------------------------------------SOLD
Custom powder coat (ruby pearl)
---Yamato traction rod (new)-------------------------------------------------SOLD
Custom powder coat (ruby pearl)
---Ballerbolts fasteners (including eccentric lockout kit) (new)------------------SOLD
---ST Suspension rear sway bar (new)--------------------------------------SOLD



Brakes:-------------------------------------------------------SOLD

---Evolution 8/9 Brembos (new seals) Front
Powder coated silver (ruby pearl decal) Powder cleared
Stainless caliper adapter (new)
---STI Rear brembo (only true bolt on brembo for S14)
Powder coated silver (ruby pearl decal) Powder cleared
---All new brake hardware (front and rear)
---Racing brake ET-500 pads (front and rear) (new)
---Custom Agency Power conversion brake hoses (front and rear)(new)
---Rotora Brake rotors (front and rear) * (new)



*was sent 2 left rear rotors, so one or both rear rotors need to be replaced


[IMG]


Front and rear Brembo brake package (specs above) As mentioned above, there are 2 left rear rotors (shipping error) so one or both rear rotors will need to be replaced. The setup was installed and bled, but never driven on.

$1050 shipped without rotors
$1200 w/rotors plus shipping


[IMG]



[/IMG]

Apexi N1 EXV Coilover (Installed, never driven on) $700

[IMG][/IMG]

[IMG][/IMG]


Yamato Garage complete adjustable suspension arm package (every arm on an s14) QA1 rod ends, Full BallerBolts.com fastener package (12 point yellow zinc w/ U-nuts) (Installed, never driven on) SOLD

[IMG]


[/IMG]


S14 front and rear lower control arms. Powder coated silver. Factory splash guard. New MOOG ball joints. New Energy Suspension bushings. New Ballerbolts and OEM fasteners. SOLD

[IMG]



[/IMG]

S14 ST Rear sway bar (installed, never driven) SOLD

[IMG]
[/IMG]

S14 axles (cosmetic recondition) SOLD

[IMG][/IMG]

J30 LSD Diff SOLD

[IMG][/IMG]

Z32 Handbrake assembly. Powder coated backing plates. R33 Skyline GTS handbrake cables (New) The true S14 bolt in cables. $250 SOLD

[IMG]
[/IMG]

doyle4281

$1600 for complete front end

Most of these parts were removed from my USDM kouki daily driver, original paint, even original ID tags on the panels. There is a slight chip in the left tailight, but otherwise fantastic conditions. Absolutely no hint of grey fading, as is common with the tailights.

USDM kouki hood-------------------------------$425
USDM kouki fenders ----------------------------$425
USDM kouki headlights w/ corner --------------SOLD
JDM kouki signals (new)--------------------------SOLD
JDM kouki grille-------------------------------------$100
JDM kouki wing-------------------------------SOLD
USDM kouki taillights ----------------$350
Origin Stylish front bumper (new)-------------$250
Origin Stylish sideskirts (new)----------------$225
Nismo replica rear bumper(new)-------------$225

[IMG] [/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]


Exhaust

Blitz NUR Spec R . Like New condition, installed, never put on the road. Includes Blitz silencer if noise is a concern. Very nice piece

SOLD

[IMG] [/IMG]

Wheels:

Price: $1700 ———-SOLD

This is a brand new set of Work Emotion XD9 wheels, special order in color MGM (Matte Gunmetal). These were not a standard color, and took 6 months to get, unlikely there are many more in this color. Tires were mounted and balanced, never driven on. The tires are old, so they likely have reached their expiration date. Specs are below, please contact me if you have any questions.

Work Emotion XD9
Front: 18x9 +20 Falken F452 245/40/R18 (Likely past expiration date)
Rear: 18x10 +18 Falken 452 265/35/R18 (Likely past expiration date)
**Special Order MGM color**

[IMG][/IMG]

[IMG] [/IMG]


Gauge Clusters:


R33 Skyline GTS Gauge Cluster. Great compliment to RB conversions. Factory harness with deutsch connectors installed. This makes it easier to change to different clusters without having to cut the harness again. Can be removed if permanent connection is preferred, and just use the connectors for something else, they are valuable.

$150 shipped

[IMG] [/IMG]


JDM S14 Kouki Gauge Cluster w/ factory harness (white face)

$125 shipped SOLD

[IMG] [/IMG]

JDM S14 Zenki Gauge Cluster (Black Face)

$100 shipped

[IMG] [/IMG]

jdmgtom

kouki wing shipped to 33713?
thanks

__________________
_________
IG - g_t0m

doyle4281

Sorry, wing has sold

Slidewayz88

Pics of rear bumper?

doyle4281

I’ll take pics of the actual bumper tomorrow, but’s it’s a 270r replica, just like this

[IMG][/IMG]

doyle4281

[IMG][/IMG]

[IMG][/IMG]

doyle4281

Thread updated with additional parts and pictures.

Future240

Let me know if you part the rear suspension.

__________________

NY2NV Miner

how much for the Kouki headlights?
didn't see a price listed for those.

__________________
Road Racing FTW

doyle4281

As of now, the front end components are listed as a set. I have gotten a number of request for the USDM headlights. PM me, ill contact you if I begin to piece out

Po_31

If you decide to part out the front end I'll take the headlights

shinhed

Any interior pieces? Kouki door panels....??? Manual antenna??

doyle4281

The interior will be the final step of the part out. Want to clear out the big stuff first. Shouldn't be too much longer, things seem to be moving rather quickly.

doyle4281

The suspension setup has been dismantled and will now be offered in separate pieces. Ill update with pictures and prices over the weekend. Some parts have already been sold or sales are pending, but please message me concerning anything you see or want to reserve. Thanks

doyle4281

doyle4281

Updated above with new pictures and prices.

Krazy719

What you doing with the shell any chance you would sell me the passenger front strut tower in the bay


Sent from my iPhone using Tapatalk

doyle4281

doyle4281

As of now, I’ll be keeping the shell

6261

Sent a message about the brake assembly via imessage. No response.

doyle4281

Replied. Sorry for the delay

doyle4281

Suspension has been pieced out if your interested in the full set of arms. Thanks

1993fdrx7

I would like to get that rear sway and maybe some other items

doyle4281

Sure, sending PM

Vin_Spin_S14

Sent you a PM.

Sent from my SM-N960U using Tapatalk

doyle4281

doyle4281

6261

I've had the cash ready to pay for the brake setup

DJTTon

Bump for a great seller! Very cordial and prompt communication, very reasonable and did not hesitate to answer questions. Very willing to work out shipping on big item. Item arrived as described. Sellers like doyle4281 are hard to come by these days

__________________
Skurr Skurr