Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 08-02-2014, 12:29 PM   #1
wheresmycoupe
Leaky Injector
 
Join Date: Feb 2011
Location: South Jersey -> South Carolina
Age: 32
Posts: 96
Trader Rating: (3)
wheresmycoupe is an unknown quantity at this point
Feedback Score: 3 reviews
s13 Need help with stalling !!!

So I'm having an issue where my car almost stalls coming to a stop. It drops down to about 500 rpms sometimes lower and The oil light flashes. Occasionally while driving my cel will blink 2 times at most. The temps have been to 100 Celsius during normal driving.

Set up is red top Sr With 550 cc inj. 50 trim .48ar. Power fc.
However my tune is for 550 ' s and a 50 trim .63 ar. I blew the turbo so the .48ar is just a temp solution until mine is finished being rebuilt. Idiotic I know.

Could that be my problem^^^ or could be something els like a bad tps and the oil light flashing is just cause the pressure is low when the cars about to stall?
wheresmycoupe is offline   Reply With Quote
Sponsored Links
Old 08-02-2014, 01:36 PM   #2
laurentj23
Zilvia Junkie
 
laurentj23's Avatar
 
Join Date: Dec 2011
Location: Chattanooga,TN
Age: 37
Posts: 422
Trader Rating: (1)
laurentj23 is an unknown quantity at this point
Feedback Score: 1 reviews
Did you check the oil? There's a reason it is flashing .
Maf or iacv?
__________________

'Born Ready!',LJ
laurentj23 is offline   Reply With Quote
Old 08-02-2014, 03:53 PM   #3
wheresmycoupe
Leaky Injector
 
Join Date: Feb 2011
Location: South Jersey -> South Carolina
Age: 32
Posts: 96
Trader Rating: (3)
wheresmycoupe is an unknown quantity at this point
Feedback Score: 3 reviews
Yea oil level is fine no leaks not burning any. I'm running a map sensor

I did not check the iacv.
wheresmycoupe is offline   Reply With Quote
Old 08-02-2014, 05:13 PM   #4
anti tyler
GM2 (SW/AW)
 
anti tyler's Avatar
 
Join Date: Jul 2008
Location: US
Posts: 3,349
Trader Rating: (37)
anti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfectionanti tyler is close to perfection
Feedback Score: 37 reviews
Send a message via AIM to anti tyler Send a message via Yahoo to anti tyler
Boost leak test it. You could simply have a vacuum line that's either not on or completely unplugged
__________________
Quote:
WillEastS14:
mannn u whylin son.
but that shyt has SWAG

KA-T for life!
Current for sale advertisement

anti tyler is offline   Reply With Quote
Old 08-03-2014, 10:54 AM   #5
wheresmycoupe
Leaky Injector
 
Join Date: Feb 2011
Location: South Jersey -> South Carolina
Age: 32
Posts: 96
Trader Rating: (3)
wheresmycoupe is an unknown quantity at this point
Feedback Score: 3 reviews
I'm going to boost leak test it today. I also forgot to mention there's a weird vibrating/clanking noise when I hold the gas steady at about 3k. Not during acceleration or deceleration
wheresmycoupe is offline   Reply With Quote
Old 08-04-2014, 12:25 AM   #6
wheresmycoupe
Leaky Injector
 
Join Date: Feb 2011
Location: South Jersey -> South Carolina
Age: 32
Posts: 96
Trader Rating: (3)
wheresmycoupe is an unknown quantity at this point
Feedback Score: 3 reviews
Update vacuum pressure is fine no leaks.
Clanking noise only happens when throttle is held at content speed. Not during boost or idling.

Almos t sounds like it's coming from the timing chain area...
wheresmycoupe is offline   Reply With Quote
Old 08-04-2014, 07:51 AM   #7
rpierce
Zilvia Member
 
rpierce's Avatar
 
Join Date: May 2011
Location: Beavercreek, Ohio
Posts: 241
Trader Rating: (14)
rpierce is an unknown quantity at this point
Feedback Score: 14 reviews
Sounds like the side effects of an atmospheric BOV on a MAF car. It almost seems like it happens more often with the Greddy type BOV's too.
It annoyed me so I just used a radiator hose to recirculate the BOV back into the intake and it runs fantastic now.
rpierce is offline   Reply With Quote
Reply

Bookmarks

Tags
50 trim, 550 injectors, help a kid out, s13, sr20det


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:30 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™