1UZFE into S-Chassis - Page 33 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*!Zar!* · 02-27-2018, 11:20 PM

Swapping a non VVTI 1uz seems like such a waste when the VVTI version could be had for peanuts while offering so much more.

aarongdl · 03-07-2018, 05:33 PM

The issue we have as UZ owners is there isn't much aftermarket, and as far as ECU it either goes to Russia to be immobilized, or you have to go standalone.

PowerDrifter · 03-08-2018, 04:25 PM

Quote:

Originally Posted by !Zar!

Swapping a non VVTI 1uz seems like such a waste when the VVTI version could be had for peanuts while offering so much more.

Quote:

Originally Posted by 1UZVillain

nice, keep us updated on the progress, what did you run?

8.3 1/8 with alot of tire spin all 3 gears. should be around 7.7 with new tires

1UZVillain · 03-23-2018, 07:49 AM

Quote:

Originally Posted by PowerDrifter

8.3 1/8 with alot of tire spin all 3 gears. should be around 7.7 with new tires

okay cool, been absent a few months, need this weather to warm up

Issa__40__ · 03-29-2018, 02:41 PM

i know this post is from a few years ago and im currently doing the same swap in my s14 ,, everythings in now i just need to find someone to convert my harness which was used in a 1uz s13 to work with my s14 , anyone near inland empire able to do that for me ?

1UZVillain · 03-30-2018, 05:42 AM

Quote:

Originally Posted by Issa__40__

i know this post is from a few years ago and im currently doing the same swap in my s14 ,, everythings in now i just need to find someone to convert my harness which was used in a 1uz s13 to work with my s14 , anyone near inland empire able to do that for me ?

I do not know, i would ask on the 1uz s-chassis group on facebook if you haven't joined already, im sure some one on there has info on that. Congrats on your build, your def farther than me and my shit shit been apart for a year lol

1UZVillain · 03-30-2018, 05:48 AM

Quote:

Originally Posted by imoverherre

Seriously anybody selling a harness plug and play also lost with wiring so car just sitting collecting dust

.

late response...im trying to document my wiring adventure, im using the yury ECU way. Im basically ripping everything out lol its a pain in the ass

1UZVillain · 03-30-2018, 06:03 AM

Quote:

Originally Posted by 914Slide

i agree, though i think i may have it figured out are you using the 34,22.16,28 ecu or something else. i have a uncut harness since i pulled mine from a running car with mysterious 28 pin plug people seam to be missing. form what i have figured most of the wiring to run power to the ecu sensors and happen on this plug. There is also a separate stock plug with the starter and injector/coil power on it, its a really big white plug with some fat wires in it. Im trying to utilize all of the stock plugs to make it easy to disconnect and pull the motor. i would love to wire it in to the stock 240sx dash harness and start it with my key, that's the part that's giving me the problems. push start, switch panel and relays is the easiest way.

late response sorry, i was reading back and didnt see the question.

i can check what ecu i have when i get home. but i have the stock loom also.

you find a solution let me know. i built a relay circuit board that i will run power too, connect to the ecu and other separate accessories for the 1uz.

the way im thinking is: if i got the stock loom it just needs power all the wiring is there, only thing i got to figure out is wiring in the A/T emulator on the loom, also i am re-wrapping the loom to be cleaner in engine bay (PITA)

right now im waiting on parts and trying to figure out what wiring from the stock S13 fuse box i don't need and can delete, obliviously its everything thats connected to the engine but its hard to identify them all, im tempted to just pull everything out and manual override all the accessories and build another relay board with switches.

1UZVillain · 04-02-2018, 10:16 AM

quick question anybody in here using the Yury modded ECU setup with the A/T emulator?

1UZVillain · 04-13-2018, 10:36 AM

Started Separate Instagram account exclusively about my car. I will also start vloggin my build from where im at on youtube (im not a good speaker) off my phone and gpro nothing spectacular, it may help you guys. Itll def keep me motivated.

Instagram: 1uzvillain
youtube: 1uzvillain (no car vids yet)

Issa__40__ · 04-13-2018, 10:43 AM

i just followed you brotha

1UZVillain · 04-13-2018, 11:04 AM

Quote:

Originally Posted by Issa__40__

i just followed you brotha

i gotcha bro

*!Zar!* · 04-13-2018, 12:46 PM

Anyone come across an ETCSi drive by wire Delete for vvti yet? I know DriftMotion talked about making one, but it never happened.

1UZVillain · 05-25-2018, 02:37 PM

Quote:

Originally Posted by !Zar!

Anyone come across an ETCSi drive by wire Delete for vvti yet? I know DriftMotion talked about making one, but it never happened.

no i heard about a delete mod, but never seen it

PowerDrifter · 06-28-2018, 02:07 AM

Quote:

Originally Posted by !Zar!

Swapping a non VVTI 1uz seems like such a waste when the VVTI version could be had for peanuts while offering so much more.

gonna have to disagree. Vvtti is harder to swap because of the immmobilizer and it has weaker internals than earlier 1uz

anyways here more videos of my nitrous 150 shot 1uz

PowerDrifter · 07-08-2018, 11:16 PM

Happy to report engine survived 175 shot

1990 1uzfe with ka24de transmission
No tuning

Mods:
Walboro fuel pump
2 step colder plugs
Nitrous express 175 wet shot nitrous

Foot slips off clutch. Passes last second

240sx vs cobra

240sx vs rs4 420HP

1UZVillain · 08-04-2018, 01:39 PM

Quote:

Originally Posted by PowerDrifter

Happy to report engine survived 175 shot

1990 1uzfe with ka24de transmission
No tuning

Mods:
Walboro fuel pump
2 step colder plugs
Nitrous express 175 wet shot nitrous

Foot slips off clutch. Passes last second

240sx vs cobra

240sx vs rs4 420HP

nice and the trans holding too

PowerDrifter · 10-18-2018, 07:48 PM

Anyone in the CA long beach area have a maf i could try?

Blew my last maf and bought another used one and it idle weird with the maf plugged in but fine without. Reading online it might be another bad maf

i want to try another maf before having to buy a new one

Issa__40__ · 10-19-2018, 09:05 AM

im in the inland empire and i have a MAF you can try but i know its a drive . i also have a spare non vvti engine if anyone needs any parts

PowerDrifter · 08-23-2019, 03:50 PM

This thread kinda died but lots of good info and recently went big turbo. Should be done next week with a FPR at 8 psi

Issa__40__ · 08-23-2019, 03:52 PM

man thats sick!!! i need to go for a ride in this shit lol

PowerDrifter · 08-23-2019, 04:03 PM

Quote:

Originally Posted by Issa__40__

man thats sick!!! i need to go for a ride in this shit lol

ill try to take this car to adams track or maybe autoclub drag strip but im normally going to irwindale. i think i asked you about your s14 boost gauge on facebook if your the one that was selling s14.

i made an instagram for those that want to follow as i think this is the only 240sx 1uzfe turbo in socal
Insta: 240sxv8t

MrChow · 11-28-2019, 03:32 PM

I thought I stop by in here to take a look at what's going on in here.

Quote:

Originally Posted by 1UZVillain

quick question anybody in here using the Yury modded ECU setup with the A/T emulator?

For anyone else that wants the info for this PM. I'll link and get the info you need. I don't wanna post out the FB group for it. I've work with Yury for a bit he's got some good shit.

George_R · 11-28-2019, 10:43 PM

All Yury's stuff can be viewed/ordered here
Https://all4swap.ru

S13-Dreams · 12-19-2019, 09:14 AM

Mated to the trans and ready to drop into the car.

Sent from my SM-A505U1 using Tapatalk

Marphie21 · 12-19-2019, 09:21 AM

Are there any known problems using the stock 1UZ powersteering pump with a nissan rack? Keep getting leaks out of shafts ��

S13-Dreams · 12-21-2019, 12:17 AM

Into its new home.

Sent from my SM-A505U1 using Tapatalk

1UZVillain · 07-26-2020, 09:43 PM

im still here, my whole car is torn down almost, i am still pushing, replacing the heater core and all that jazz, wire pull and everythang...this covid really slowed me down but im pushing through

1UZVillain · 11-11-2020, 07:31 PM

are we still alive? lol.....soon school will be done February for me and ill have my time again, but i have been doing little things on my car here and there, now i am thinking of upgrading other things too i found. Also do anyone know where to get a automatic trans cross member for a ka24e other than ebay? or do anyone want to sell one?

1UZVillain · 06-09-2021, 04:40 PM

im still at it, never give up! hard work got in the way and school is done for me for now.

taking the engine out to recheck some things, also to replace the mounts, i got better ones that allow stock trans position, clears exhaust and you can use oem driveshaft.

my major worry is when i did the timing belt replacement i replaced the seals, my crank seal is black and ive been seeing the brown ones used on other builds, so i wonder if i used the wrong seal thats what toyota lexas dealership gave me btw. things like that worry me lol

02-27-2018, 11:20 PM	#961
!Zar! Premium Member Join Date: Nov 2004 Location: North Korea Posts: 14,576 Trader Rating: (27) Feedback Score: 27 reviews	Swapping a non VVTI 1uz seems like such a waste when the VVTI version could be had for peanuts while offering so much more. __________________

04-13-2018, 12:46 PM	#973
!Zar! Premium Member Join Date: Nov 2004 Location: North Korea Posts: 14,576 Trader Rating: (27) Feedback Score: 27 reviews	Anyone come across an ETCSi drive by wire Delete for vvti yet? I know DriftMotion talked about making one, but it never happened. __________________

12-19-2019, 09:14 AM	#985
S13-Dreams Leaky Injector Join Date: Jan 2016 Location: Palmdale, Ca Age: 29 Posts: 58 Trader Rating: (0) Feedback Score: 0 reviews	Mated to the trans and ready to drop into the car. Sent from my SM-A505U1 using Tapatalk __________________ "The SE with the removeable top!" -random black guy at a gas station.

12-21-2019, 12:17 AM	#987
S13-Dreams Leaky Injector Join Date: Jan 2016 Location: Palmdale, Ca Age: 29 Posts: 58 Trader Rating: (0) Feedback Score: 0 reviews	Into its new home. Sent from my SM-A505U1 using Tapatalk __________________ "The SE with the removeable top!" -random black guy at a gas station.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-07-2018, 05:33 PM	#962
aarongdl Join Date: Aug 2015 Location: Alabama Age: 40 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	The issue we have as UZ owners is there isn't much aftermarket, and as far as ECU it either goes to Russia to be immobilized, or you have to go standalone.

03-29-2018, 02:41 PM	#965
Issa__40__ Leaky Injector Join Date: Aug 2017 Location: colton ca Age: 31 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	i know this post is from a few years ago and im currently doing the same swap in my s14 ,, everythings in now i just need to find someone to convert my harness which was used in a 1uz s13 to work with my s14 , anyone near inland empire able to do that for me ?

04-02-2018, 10:16 AM	#969
1UZVillain Join Date: Jun 2016 Location: Maryland Age: 35 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	quick question anybody in here using the Yury modded ECU setup with the A/T emulator?

04-13-2018, 10:36 AM	#970
1UZVillain Join Date: Jun 2016 Location: Maryland Age: 35 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	Started Separate Instagram account exclusively about my car. I will also start vloggin my build from where im at on youtube (im not a good speaker) off my phone and gpro nothing spectacular, it may help you guys. Itll def keep me motivated. Instagram: 1uzvillain youtube: 1uzvillain (no car vids yet)

04-13-2018, 10:43 AM	#971
Issa__40__ Leaky Injector Join Date: Aug 2017 Location: colton ca Age: 31 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	i just followed you brotha

07-08-2018, 11:16 PM	#976
PowerDrifter Zilvia Junkie Join Date: Nov 2011 Location: Southern Cali Posts: 315 Trader Rating: (1) Feedback Score: 1 reviews	Happy to report engine survived 175 shot 1990 1uzfe with ka24de transmission No tuning Mods: Walboro fuel pump 2 step colder plugs Nitrous express 175 wet shot nitrous Foot slips off clutch. Passes last second 240sx vs cobra 240sx vs rs4 420HP

10-18-2018, 07:48 PM	#978
PowerDrifter Zilvia Junkie Join Date: Nov 2011 Location: Southern Cali Posts: 315 Trader Rating: (1) Feedback Score: 1 reviews	Anyone in the CA long beach area have a maf i could try? Blew my last maf and bought another used one and it idle weird with the maf plugged in but fine without. Reading online it might be another bad maf i want to try another maf before having to buy a new one

10-19-2018, 09:05 AM	#979
Issa__40__ Leaky Injector Join Date: Aug 2017 Location: colton ca Age: 31 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	im in the inland empire and i have a MAF you can try but i know its a drive . i also have a spare non vvti engine if anyone needs any parts

08-23-2019, 03:50 PM	#980
PowerDrifter Zilvia Junkie Join Date: Nov 2011 Location: Southern Cali Posts: 315 Trader Rating: (1) Feedback Score: 1 reviews	This thread kinda died but lots of good info and recently went big turbo. Should be done next week with a FPR at 8 psi

08-23-2019, 03:52 PM	#981
Issa__40__ Leaky Injector Join Date: Aug 2017 Location: colton ca Age: 31 Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	man thats sick!!! i need to go for a ride in this shit lol

11-28-2019, 10:43 PM	#984
George_R Join Date: Dec 2014 Location: Moscow, Russia Age: 37 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	All Yury's stuff can be viewed/ordered here Https://all4swap.ru

12-19-2019, 09:21 AM	#986
Marphie21 Join Date: May 2012 Location: Philippines Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	Are there any known problems using the stock 1UZ powersteering pump with a nissan rack? Keep getting leaks out of shafts ��

07-26-2020, 09:43 PM	#988
1UZVillain Join Date: Jun 2016 Location: Maryland Age: 35 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	im still here, my whole car is torn down almost, i am still pushing, replacing the heater core and all that jazz, wire pull and everythang...this covid really slowed me down but im pushing through

11-11-2020, 07:31 PM	#989
1UZVillain Join Date: Jun 2016 Location: Maryland Age: 35 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	are we still alive? lol.....soon school will be done February for me and ill have my time again, but i have been doing little things on my car here and there, now i am thinking of upgrading other things too i found. Also do anyone know where to get a automatic trans cross member for a ka24e other than ebay? or do anyone want to sell one?

06-09-2021, 04:40 PM	#990
1UZVillain Join Date: Jun 2016 Location: Maryland Age: 35 Posts: 46 Trader Rating: (0) Feedback Score: 0 reviews	im still at it, never give up! hard work got in the way and school is done for me for now. taking the engine out to recheck some things, also to replace the mounts, i got better ones that allow stock trans position, clears exhaust and you can use oem driveshaft. my major worry is when i did the timing belt replacement i replaced the seals, my crank seal is black and ive been seeing the brown ones used on other builds, so i wonder if i used the wrong seal thats what toyota lexas dealership gave me btw. things like that worry me lol