Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 10-04-2020, 06:09 PM   #1
RobbieSS
 
Join Date: Mar 2020
Location: Ohio
Posts: 20
Trader Rating: (0)
RobbieSS is an unknown quantity at this point
Feedback Score: 0 reviews
sr20det Cracked rockers & cam, replace or inspect further.

Bought a blacktop swapped s14 and discovered 2 rockers that split in half and a very chipped camshaft lobe, all the other rockers look fine as well as the springs though I do not know how to spot faults in spring and retainers. It's only the right cam that's got a chipped lobe the other seems about fine. my question is should i tear the engine out and inspect the cylinders along with anything else that could've been affected or should i just replace the rockers and the camshafts. I drained the oil and somehow didn't see a single metal flake so it might be healthy. I'll attach some pictures, any help is appreciated <3

https://imgur.com/a/POgUmM5
RobbieSS is offline   Reply With Quote
Sponsored Links
Old 10-04-2020, 06:11 PM   #2
pjurisprudencia
Leaky Injector
 
pjurisprudencia's Avatar
 
Join Date: Nov 2012
Location: Las Vegas
Age: 26
Posts: 90
Trader Rating: (0)
pjurisprudencia is an unknown quantity at this point
Feedback Score: 0 reviews
I just swapped out my rockers and shins and put it all back together. Just make sure to clean out any metal floating around in the head


Sent from my iPhone using Tapatalk
__________________
Don’t mind me, I’m just an irrelevant little shit.
pjurisprudencia is offline   Reply With Quote
Old 10-06-2020, 09:04 AM   #3
jedi03
Nissanaholic!
 
Join Date: Jul 2008
Location: albuquerque
Posts: 1,786
Trader Rating: (8)
jedi03 is on a distinguished road
Feedback Score: 8 reviews
ya should be ok...filter should have cleared out anything if there was nothing in the pan...nice time to upgrade cams!
jedi03 is offline   Reply With Quote
Old 10-26-2020, 04:09 PM   #4
LtSlayer
Leaky Injector
 
Join Date: Jul 2020
Location: Norco
Posts: 68
Trader Rating: (0)
LtSlayer is an unknown quantity at this point
Feedback Score: 0 reviews
I had an identical crack to the rocker on the left, I believe the cause was the hard cut from the ECU at 7200 RPM. Its brutal on the rockers to go from full boost and load to hard downshift essentially.I was lucky enough to not have any cam damage. Make sure you can fully assembly the broken rockers and find all the shims. Check you oil pan for metal as well. The oil pickup has a mesh screen but its best to clean it out anyways. Ask a local machine shop if they can clean up the cam for cheap. Cams are relatively cheap when compared to machine shop labor so I'd look into it. Look into cam mixtures and set ups if you want to retain the other sides cam. I've read that mismathed durations dont behave well on SRs lol. goodluck
LtSlayer is offline   Reply With Quote
Reply

Bookmarks

Tags
cams, head, rockers, springs


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™