Power Steering - Replacing HICAS - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wingzero · 12-07-2008, 01:38 PM

The Redtop SR I got came with a HICAS power steering setup. I don't have HICAS so I need to change my p/s setup.

From searching, I found out the following:

KA24DE power steering pump can be used but only with a SR tensioner bracket and a non-HICAS engine mount bracket.

By removing the blades from the HICAS part of the pump and plugging the HICAS port I can use the pump I have. *unfortunately I bent the pulley trying to pull it off.

What I couldn't find was if there was a difference between the S14 SR brackets/pump and the S13 SR brackets/pump.

Are the S14 SR parts and S13 SR power steering parts interchangeable?

12-07-2008, 01:38 PM	#1
wingzero Join Date: Jul 2006 Location: FL Posts: 29 Trader Rating: (4) Feedback Score: 4 reviews	Power Steering - Replacing HICAS The Redtop SR I got came with a HICAS power steering setup. I don't have HICAS so I need to change my p/s setup. From searching, I found out the following: KA24DE power steering pump can be used but only with a SR tensioner bracket and a non-HICAS engine mount bracket. By removing the blades from the HICAS part of the pump and plugging the HICAS port I can use the pump I have. *unfortunately I bent the pulley trying to pull it off. What I couldn't find was if there was a difference between the S14 SR brackets/pump and the S13 SR brackets/pump. Are the S14 SR parts and S13 SR power steering parts interchangeable?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode