|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
04-24-2005, 06:22 PM | #1 |
Leaky Injector
|
Questions for 12-13psi
ok well I got my avc-r all installed and running, however, I was wondering what other people in here are running for boost/duty settings?
I'm planning to bump it to .85 kg/mm but I was wondering when when I set my duty, that the boost will go up to 12/13 but drop a bit and then go back up? If i turn off the self learning mode will this help, because after a drive the duty level will change to *** which means self learning mode. |
Sponsored Links |
04-24-2005, 11:16 PM | #2 |
Leaky Injector
Join Date: Jan 2005
Location: Bonney Lake, WA
Posts: 105
Trader Rating: (0)
Feedback Score: 0 reviews
|
Gotta admit I'm not entirely familiar with the AVC-R. Is the boost still funky after its' been in self learning mode for a while? Or is it only before? If it's only before it goes into self learning mode then your just boosting to early. Boost controllers like that are designed to moniter your boost patterns and adjust appropriatly. On ones like my Profec-B that kind of behavior means too early boost start, gain too high etc. and we get to tune it out.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|