|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series. |
|
Thread Tools | Display Modes |
01-31-2010, 02:50 PM | #1 |
Nissanaholic!
|
sr timing issue
ok guys so my car started to run a bit poorly. redtop w/ injectors, s15 bb, FMIC, FPR, 255 pump etc....
so i checked tps....in spec. so then i check timing. it was way off past 20* like a couple inches!!!!! when i adjusted the CAS w/ tps unplugged it wont even run at 15* BTDC. could my cas be off a tooth? what would cause this. right now its actually running pretty well....and thats with timng way off
__________________
@UpshiftEngineering |
Sponsored Links |
01-31-2010, 02:54 PM | #2 |
Post Whore!
|
I have seen this more and more lately. I think it's just a symptom of a dyning CAS or a bad CAS. You could try re-punching it although in my expreience this usually doesnt help.
What I often do on these cases, suggest a new CAS. Or if you have a power fc or an adjustable EMS which you can manually control the timing map you could try adjusting this and scaling it - x degrees based on where your starting place is. I have had to do this on a couple cars because of the horrible synch on the trashed cas.
__________________
Like Me on FaceBook ! |
01-31-2010, 04:29 PM | #3 | |
Nissanaholic!
|
Quote:
will look into a new CAS
__________________
@UpshiftEngineering |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|