Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Marketplace > For Sale Items > Cars For Sale


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-27-2021, 08:19 PM   #1
DUDEIDONTHAVEA240
Zilvia Member
 
Join Date: Jun 2005
Location: killa cali
Posts: 166
Trader Rating: (3)
DUDEIDONTHAVEA240 is an unknown quantity at this point
Feedback Score: 3 reviews
1997 240sx se rb25det

SOLD!

1997 Nissan 240sx SE
Clean California Title, registered
(Car is located in San Diego, California)

Original for sale thread can be found here-https://zilvia.net/f/showthread.php?t=637652
Please check out the old thread imgur album. There are 181 images of the car, items, paperwork, etc. https://imgur.com/a/MzADb
The most recent photos of the car https://imgur.com/a/hlqN5Hc

This car came factory with an automatic transmission, power windows, power locks, power mirrors & no sunroof. I have owned the car since 2009,
originally I wanted a fun daily so I converted it to a manual transmission and swapped in a built KA24DET. I drove that for a while, had a throttle
body screw come loose and blow the motor up. My intention was to re-build a stout rb25det and possibly drag race it on the weekends. I am now a proud
father of two girls and and my priorities have shifted hence the reason for selling. The car was posted for sale 4 years ago as a project,
but all of the work has been finished and the car is now a complete running daily driver. Overall the car is in excellent condition and I am in no rush
to sell it. Lowball offers will be ignored. Carfax report (says 6 owners but only 4 total, 2 are just title updates) http://clicks.email.carfax.com/ls/cl...G2wY9H5V0Q7b5i
Feel free to contact me via this listing, phone/text (619)739-3296 or email at [email protected]

SOLD


Motor/Drivetrain:
-RB25DET Series 1 motor w/ RB25 5 speed transmission
-Machine shop work
(Vat clean, block report, crank report, polish, align bore, deck inline, bore and hone, plugs, balance rotating assembly, fit pin + mount piston, machine and install pump drive (Raw Brokerage Crank Collar), resurface and file fit rings) All work done by Car Parts Machine in El Paso TX.
-All new OEM Gaskets
-Cometic head gasket
-Cometic exhaust gasket
-Nissan N1 oil pump
-Nissan N1 water pump
-ACL bearings
-CP Pistons
-Manley Rods
-ARP head studs
-ARP main studs
-Tomei Poncams 256/256
-Tomei adjustable exhaust cam gear
-Stock turbo and manifold
-Greddy intake manifold with Q45 throttle body
-ACT 350z 350mm clutch
-Exedy billet chromoly flywheel
-Zerolift motor mounts/trans mount/ 1 piece steel driveshaft
-Megan racing engine and transmission mounts
-J30 differential
-Stainless BRM exhaust w/ Magnaflow resonator/muffler
-CXRacing turbo elbow
-Redline 75w90 gear oil in the diff and MT-90 in the transmission
-Mobil1 10w40 engine oil
-Carbon fiber front cover (not mounted) and coil pack cover (mounted)
-HKS SSQV BOV
-ISIS short throw shifter
-N60 MAF
-S15 power steering pump


Fuel:
-AEM 50-1200 E85 compatible in tank fuel pump
-Nismo adjustable fuel pressure regulator
- -8 AN Braided Fuel Hose/Feed
- -6 AN Braided Fuel Hose/Return
-Bulk head fittings installed at the fuel tank cap
-Russell Competition 40 Micron Inline fuel filter installed on feed line
-Runs on 91 octane


Electrical:
-Battery relocated to the trunk with the main power running through the interior of the car
-Custom battery box with mounted fused electrical disconnect
-Prosport oil pressure gauge
-Autometer boost gauge


Cooling:
-Koyo aluminum radiator
-Front mount intercooler w/piping
-Arizona Iced Tea over flow tank
-Aluminum reservoir for power steering fluid, AN fittings installed on tank and on steering rack, nylon black braided lines connect everything
-Has all of the AC components including the RB25 a/c pump. I have all the stock s14 compressor lines but they need to be modified to fit. Everything is in a tote and not mounted except the condenser.


Suspension:
-KYB AGX springs and struts
-SPL aluminum subframe collars


Wheels :
-350z wheels (x4)
-Continental Extreme Contact 225/45/17 tires. Still have lots of tread left


Interior :
-95 240sx seats front and rear
-Kenwood KDC138 Headunit
-Nardi Sport Rally Deep Corn 330mm (black with red stitching)
-NRG short hub black
-NRG quick release 2.5 black/black
-Blue bubble shift knob

Exterior:
-Street Faction front bash bar
-Kouki SE lip

Bad:
-Transmission is making a whining noise when clutch is pressed in. Throwout bearing was replaced and all contact points were greased and the noise remains so I am guessing the transmission needs a bearing or something.
-Headlights need adjusting
-Passenger side door is missing the door swing stop
-Struts squeak and need to be replaced or upgrade to coilovers



Not included in sale but can be added:
-PTE 1600cc injectors x6
-Weld Prostar 15x8 (x2) w/ Mickey Thompson ET Streets 26x10.5

Last edited by DUDEIDONTHAVEA240; 06-26-2021 at 02:35 PM.. Reason: Sold.
DUDEIDONTHAVEA240 is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™