Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 03-04-2013, 03:11 PM   #1
Ztrix
 
Join Date: Mar 2013
Location: Kingston, Tn
Posts: 3
Trader Rating: (0)
Ztrix is an unknown quantity at this point
Feedback Score: 0 reviews
wierd injector probs and other fun stuff

i have a 93 240sx i picked up recently. i did an upper gasket set and removed emissions ect. anyways, i had some issues with my injector orings for awhile. Got that fixed for the most part. now while idiling my #1 cyclinder isn't firing. has spark. now for the wierd part, i unplug the injector and it seems to start hitting. manifold temp on the 1st cyclinder goes from 175ish to 300+. i replaced the injector and it was hitting perfectly. now i go to start it today and its missing again, same prob. any ideas? ive never seen anything like this lol.
im only getting one code,34- knock sensor... when i was pulling the intake mani and looked at the knock sensor it only had one black wire going to it. just curious if theres supposed to be another wire or not.
im having Alot of fun diagnosing this one so if anyone has any opinions or ideas, im open to anything here lol.
Ztrix is offline   Reply With Quote
Sponsored Links
Old 03-04-2013, 05:42 PM   #2
JustCallMePirate
 
Join Date: Nov 2010
Location: Nor Cal
Age: 30
Posts: 18
Trader Rating: (0)
JustCallMePirate is an unknown quantity at this point
Feedback Score: 0 reviews
Well your knock sensor wont have anything to do with your cylinder not firing, ill try and check the wire thing when I get home for you if no one has answered yet. Have you done a full tune up on it yet? Plugs wires cap rotor?
JustCallMePirate is offline   Reply With Quote
Old 03-04-2013, 09:37 PM   #3
Ztrix
 
Join Date: Mar 2013
Location: Kingston, Tn
Posts: 3
Trader Rating: (0)
Ztrix is an unknown quantity at this point
Feedback Score: 0 reviews
Agreed. And I have. New cap and rotor. New plugs my wires are good. All have emitted spark. I read a thread on tricking the ecu into thinking it has a knock sensor earlier. Thoughts? The wiring is hella f***** up. Ive went through my harness and found no broken or messed up wires other than that.
Heres what's odd. When its idling and missing I unplug #1 injector and it starts firing. Ill check the manifold temp on that cyclinder to see if its close to the same and it is. Then ill pull the #1plug wire with the injector still unplugged and it starts missing. Seems to me that for some reason the injector is spraying at idle without getting signal from the ecu. Ive pulled the rail and none of the injectors are leaking under pressure. Wierd right?
Ztrix is offline   Reply With Quote
Old 03-05-2013, 04:38 PM   #4
Ztrix
 
Join Date: Mar 2013
Location: Kingston, Tn
Posts: 3
Trader Rating: (0)
Ztrix is an unknown quantity at this point
Feedback Score: 0 reviews
Noob moment. I'm thinking the spark plug wire was intermittently sparking. Lol
Ztrix is offline   Reply With Quote
Old 03-15-2013, 02:54 PM   #5
p00t
Leaky Injector
 
p00t's Avatar
 
Join Date: Apr 2003
Location: mi, usa
Posts: 71
Trader Rating: (0)
p00t is an unknown quantity at this point
Feedback Score: 0 reviews
Could be the injector connector, see if the contacts look shitty. The rubber boots on them are all cracked up usually. You can also move the engine harness around with it idling and see if you can get it to start missing.
p00t is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™