How to unbolt a brake booster on a LHD S13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Croustibat · 08-23-2015, 03:08 AM

Hey guys,

i was a little stuck yesterday trying to remove that thing. I unbolted the MC, no problem at all, ans then proceeded to remove the 4 bolts on the other side.

My problem is that i just have no access to the upper right one. The 3 others went easily, but i just can't reach the 4th. Is there a trick here ? Do i need to unbolt something else first ? Use an extension ? It seems the hard part is removing the clip, but i got stopped before

cotbu · 08-23-2015, 08:46 AM

You mean the nut no one puts back on?
Back on seat arm and hand between brake and accelerator open box end wrench and do it by feel just cracked it free then use your fingers.

Tip: Start with the hard ones first!

Sent from a Highly Tuned Note 4.5!!!

zombiewolf513 · 08-23-2015, 09:06 AM

I use a ratcheting wrench on that one.

Like cotbu said, getting the hard one off first makes the whole process easier

Croustibat · 08-23-2015, 01:13 PM

Finally did it. I had to remove the seat and get on my back to access it ... what a nightmare ... The worst was actually setting and fitting the brake rod again, because i started screwing these 4 bolts first and of course it didn't line up

Now done. I will test tomorrow and see if my problem is still there. I had every symptom of pad knockback, but i changed everything brake related except the booster (and i say everything ... wheels, wheel bearings, spindles, suspension arms, brake discs, calipers, lines, master cylinder, purged a bazillion times, problem was still there)

08-23-2015, 03:08 AM	#1
Croustibat Nissanaholic! Join Date: Aug 2011 Location: France - Toulouse Age: 41 Posts: 1,851 Trader Rating: (0) Feedback Score: 0 reviews	How to unbolt a brake booster on a LHD S13 Hey guys, i was a little stuck yesterday trying to remove that thing. I unbolted the MC, no problem at all, ans then proceeded to remove the 4 bolts on the other side. My problem is that i just have no access to the upper right one. The 3 others went easily, but i just can't reach the 4th. Is there a trick here ? Do i need to unbolt something else first ? Use an extension ? It seems the hard part is removing the clip, but i got stopped before

08-23-2015, 08:46 AM	#2
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 47 Posts: 3,318 Trader Rating: (3) Feedback Score: 3 reviews	You mean the nut no one puts back on? Back on seat arm and hand between brake and accelerator open box end wrench and do it by feel just cracked it free then use your fingers. Tip: Start with the hard ones first! Sent from a Highly Tuned Note 4.5!!! __________________ LoverTechnologies "Half Broken Things!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-23-2015, 09:06 AM	#3
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 33 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	I use a ratcheting wrench on that one. Like cotbu said, getting the hard one off first makes the whole process easier

08-23-2015, 01:13 PM	#4
Croustibat Nissanaholic! Join Date: Aug 2011 Location: France - Toulouse Age: 41 Posts: 1,851 Trader Rating: (0) Feedback Score: 0 reviews	Finally did it. I had to remove the seat and get on my back to access it ... what a nightmare ... The worst was actually setting and fitting the brake rod again, because i started screwing these 4 bolts first and of course it didn't line up Now done. I will test tomorrow and see if my problem is still there. I had every symptom of pad knockback, but i changed everything brake related except the booster (and i say everything ... wheels, wheel bearings, spindles, suspension arms, brake discs, calipers, lines, master cylinder, purged a bazillion times, problem was still there)