ILoveMyRHS13

I still have quite a few parts left over from my car sitting around that I'm trying to get rid of, but posting on instagram can only get me so far. All parts are located in York, PA, which is about an hour and a half west of Philly.

Up first is my S13 SR20 motorset. Please read this whole section first. An oil cooler line popped off while drifting, but I shut off the motor immediately. I put the line back on, and put oil back in and it didn't make an noises and still showed good oil pressure, so it's not blown, BUT I did an oil analysis and it does show some metal in the oil, but NOT brass bearing material. The casualty in the whole situation is it starved the turbo of oil, and it blew up. I would recommend an oil flush, GOOD oil filter and a magnetic oil drain plug when first running it. Will include professionally tucked and wrapped wiring harness, Tennessee Clutch Supply "competition clutch", freshly resurfaced flywheel (has one event on it), clutch fan and shroud, Circuit Sport rocker arm stoppers, and other odds and ends. I have a video of the motor running before the oil line popped off if you're interested; never did a compression test but the motor always ran VERY strong. Will not include downpipe, intercooler, oil cooler, swirl tank, radiator, catch can or shifter. SOLD - I am NOT willing to ship this; I don't have a truck or any way to transport it, so it's on you to come get it.
Untitled by Doug Buttermore, on Flickr

C's short shifter - fairly rare item and easily one of the best short shifters for Nissans. Will fit KA/SR/RB trans and comes with everything you need to put it in as shown. $190 shipped in the lower 48 states.
Untitled by Doug Buttermore, on Flickr
Untitled by Doug Buttermore, on Flickr
Untitled by Doug Buttermore, on Flickr

Powered By MAX Cobra downpipe for SR20. The divider has been cut for T28, but works just fine on T25, which is how I ran it. This is the best downpipe on the market for SR20. It has some scrapes on it, but the flex pipe is in good shape. SOLD - I'm not willing to ship this, it's a pain in the ass.
Untitled by Doug Buttermore, on Flickr

WELD coilpack cover for S13 SR. In great shape, no hardware. SOLD
Untitled by Doug Buttermore, on Flickr

GT Spec front strut bar for S13. It has some scratches on it from hitting the hood (which was aftermarket) but still functions 100%. SOLD - no shipping.
Untitled by Doug Buttermore, on Flickr

Custom LED Kouki taillights. They are made to be plug and play. They are in good shape overall, will include the center section. Two of the LEDs in the right driver's side light work 90% of the time, but sometimes flicker. If you pick them up, I will include the lower garnish as well. SOLD
Untitled by Doug Buttermore, on Flickr
Untitled by Doug Buttermore, on Flickr

Text me for my best response, I don't check Zilvia often. If I don't respond, texting at work is difficult, but I will get back to you. 386-882-2133

__________________

d_nice

some cool stuff here

Bcombs14

Wanna sell that turbo inlet


Sent from my iPhone using Tapatalk

driftminds13

I know you dont want to ship, but if you end up changing your mind I would be interested in the PBM downpipe, just lmk. GLWS!

ILoveMyRHS13

Coilpack cover sold

__________________

ILoveMyRHS13

Latenight bump

__________________

chele

I'm down for the short throw

idk how this works so message me i guess

ILoveMyRHS13

I messaged you back.

Please make offers on that SR20. I move out December 10th and don't feel like taking it with me.

__________________

ILoveMyRHS13

Bump bump bump

__________________

ILoveMyRHS13

Taillights are sold.

__________________