|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15. |
 |
|
|
Thread Tools | Display Modes |
02-24-2016, 08:16 AM
|
#1 |
|
Leaky Injector
|
S13 need advise of frame fix?
So I got a s13, I traded a sr20 Ecu for it. Anyways I am swapping a v8 in the car and I was inspecting the car and came across a big problem, the tension rod bracket is welded to the frame rail. Only one bracket is welder but I inspected the problem and there is nothing wrong with bolt hole or threaded alignment stud so I do not know why they did that anyways I am thinking about grinding off the bracket and weld and possibly put in a repair piece. Let me know if you have any info or comments on other possible ideas and ways to repair the problem.
Thanks |
|
|
| Sponsored Links |
|
02-24-2016, 10:21 PM
|
#6 |
|
Nissanaholic!
 Join Date: Feb 2012
Location: someone's sisters' pants
Posts: 2,288
Trader Rating: (37)
 Feedback Score: 37 reviews
|
If both nut and bolt thread in their respective places, grind out the welds and slap on a new bracket.
I think that there is something wrong that you're not realizing to be honest. Who would go through that kind of trouble for nothing?
__________________
I like my bikes how I like my b¡tches...naked! 2014 Triumph Street Triple |
|
|
|
|
02-25-2016, 09:54 PM
|
#7 |
|
Leaky Injector
|
Yeah I was thinking the same thing, I looked and did not see anything obvious, will look around more tomorrow, my bracket on opposite side has a the internal frame nut spinning so the bolt and nut free spin so I need to re weld nut back on.
Thanks Richard |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
