136baker

Can someone please link me to a thread that explains how to make the kouki bumper position lights into the blinkers? I recently got a bumper that fits te lights but I don't want my stock blinkers zip tied into the bumper and id rather use the bumper lights! Thanks!

slow40sx

When you buy the position lights is they are the OEM ones they come with the bulb and plug and the pig tail hanging off the plug, you literally just cut the plug off for the stock turn signal, solder the 2 power wires from the turn signal to the 2 power wires on the position light pig tail and then there is a 3rd wire on the factory side of the harness it's a ground and you can tape it up and leave it or ground it somewhere so your blinkers blink at a normal speed otherwise they'll blink fast like they do when you have a burnt out turn signal bulb

__________________

slow40sx

There's literally no way to fuck it up, I tired it wires both ways and it changes nothing, either way works

__________________

136baker

I have them oem but they didn't come with pigtails, I just have the bulb with the socket

slow40sx

the wires are cut off clean at the back of the socket?

__________________

136baker

Yea right at the base of the clip lmao I bought them off someone, I'll probably just go to the dealer and buy the pig tails. Or can I just use female connectors or the bulb?

FaLKoN240

__________________

Best way to do business with me? Make your best offer FIRST.

slow40sx

That ^ or you could unpin the socket and repair the pins by lengthening the wires, although that would be a massive pain in the dick

__________________

136baker

got it to work! Thanks guys!

slow40sx

glad to hear it

__________________