GUNMETALR32 S14 JDM Kouki OEM LIP group buy!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gunmetalr32 · 11-05-2011, 06:17 PM

OK I'm ready to start this thing.. i'm picking up my lip tomorrow.. i sould be receiving a super mint condition lip. then i will be getting started on this awesome project.

they will be made just like my valances are with attention to all the small details and not rushed. all these lips will be ready for paint out of the box.. just scuff and paint.. just like any good product should be.

the lips i will be making will be lower about 1" lower than oem (i will be hearing and taking input before i start)

here is the link to my valances.
http://zilvia.net/f/interior-exterio...-now-sale.html

once the tech section is open i will post the build thread on the valances to show how in detail i went.

i not sure what the price will be once finished but im going to start the group buy at $250 (on the high side, might be lower) i will need 10 people.

i will be updating this thread since tech section is down!!

lets get this rolling!!!!!

$100 deposit will be collected to ensure the price and your spot.
paypal with $100 deposit to [email protected]

-yoni_nismo recived lip.

1.whitenoise-PAID
2.s13 loverr-PAID
3.Salem240-PAID sent
4.Drftr915-PAID
5.erict90-PAID
6.98_240_KA-PAID
7.harangatang-PAID
8.k0uki-PAID
9.tacotacotaco-PAID
10.cen805cal-PAID

IF I CAN GET GET 15 THE PRICE WILL BE BETTER!!!!!
11.DaZeD-not paid
12.xXKoukiXx-not paid
13.ChadMcGarity-not paid
14.afmafias14-not paid
15.sickstatus-not paid
16.revat619-not paid
17.Marcus-not paid
18.spooled240-not paid

here is the link to the old thead... back from dead in the tech section
GUNMETALR32 S14 jdm oem kouki lip!!!!

slamn240 · 11-05-2011, 06:43 PM

i need to get the rears off you first than ill get this off of you.

whitenoise · 11-05-2011, 06:47 PM

im in, PM me ur paypal so i can send deposit

gunmetalr32 · 11-05-2011, 07:06 PM

Quote:

Originally Posted by slamn240

i need to get the rears off you first than ill get this off of you.

The valances will be in production again on Monday

Quote:

Originally Posted by whitenoise

im in, PM me ur paypal so i can send deposit

[email protected]

sickstatus · 11-06-2011, 01:27 AM

Count me in!

ChadMcGarity · 11-06-2011, 07:54 AM

Id be in .

gunmetalr32 · 11-06-2011, 12:50 PM

I'll be picking up the lip tonight.. Jump on the group buy guy

afmafias14 · 11-06-2011, 01:50 PM

im in for the front lip. what will the front lip be made out of thanks in advance.

gunmetalr32 · 11-06-2011, 03:40 PM

Quote:

Originally Posted by afmafias14

im in for the front lip. what will the front lip be made out of thanks in advance.

as of right now they will be made of the same materials as the valances

- High quality fiberglass (in a roll.. not in patches or hair fibers)
- High quality grade A ISO resin
- High quality grade A gel coat

here is the link to the old thead... back from dead in the tech section
http://zilvia.net/f/s-chassis/414320...kouki-lip.html

erict90 · 11-06-2011, 06:50 PM

Im in for the lip

gunmetalr32 · 11-06-2011, 06:53 PM

Quote:

Originally Posted by erict90

Im in for the lip

ok.. please send payment.. so i can ensure you a spot for the 1st production run

Salem240 · 11-06-2011, 06:57 PM

I'm in too

whitenoise · 11-06-2011, 07:19 PM

deposit sent , im excited for this.

gunmetalr32 · 11-06-2011, 07:25 PM

Quote:

Originally Posted by whitenoise

deposit sent , im excited for this.

thank god someone paid !!! LOL

Drftr915 · 11-07-2011, 04:35 AM

You should definitely do a combo group buy, valances and a front lip. I have some engine parts I need to buy to get my new setup up in running but i am subscribing to your thread.

Keep up the good work man, you craftsmanship is top quality, good stuff.

blueshark123 · 11-07-2011, 01:39 PM

I kind of want a spare oem hopefully it looks nice lower i kind of want to see pics since im 50/50 on this since i have 2 lips already

sw20>>s14 · 11-07-2011, 04:42 PM

any package pricing with the valances? trying to imagine how this would look extended an extra inch.

Salem240 · 11-07-2011, 05:23 PM

Quote:

Originally Posted by gunmetalr32

thank god someone paid !!! LOL

You have $$$ from me too now

gunmetalr32 · 11-09-2011, 06:15 PM

alright guys bad news.. the lip didn't come in this weeks shipment

but the next shipment is coming soon (before December) so that gives me more time to do the group buy.. remember the more the better discount i can give.. if i can get 15 people i can do better on the price!!!!

Quote:

Originally Posted by Drftr915

You should definitely do a combo group buy, valances and a front lip. I have some engine parts I need to buy to get my new setup up in running but i am subscribing to your thread.

Keep up the good work man, you craftsmanship is top quality, good stuff.

alright guys i guess i'll do a group buy on the lip and the valances.. but you have put a deposit on the lip and wait till the lip is finished to get the package deal

Quote:

Originally Posted by blueshark123

I kind of want a spare oem hopefully it looks nice lower i kind of want to see pics since im 50/50 on this since i have 2 lips already

i think the oem flows perfect with the oem aero.. it just lacks that visual impression of a lowered lip..

the greddy lip looks perfect as far as the lip should sit

the greddy lip loks good .. but the oem flows better.. the oem just needs the drop like the greddy

Quote:

Originally Posted by sw20>>s14

any package pricing with the valances? trying to imagine how this would look extended an extra inch.

/\/\/\/\/\/\/\/\/\/\/\/\/\

Quote:

Originally Posted by Salem240

You have $$$ from me too now

yup got it

hows the car coming along??

Salem240 · 11-09-2011, 08:00 PM

Quote:

Originally Posted by gunmetalr32

yup got it

hows the car coming along??

Unfortunately it's not.... my body man said he can't get it in until mid December now. Oh well, seems like there has been a lot of suicidal deer lately and I'd hate to have it freshly painted just to have one eff up my car. And atleast the lip has a better chance of being in there at the same time

Drftr915 · 11-10-2011, 06:39 AM

Money in ya bank, from me, really looking forward to this.

Salem240 · 11-11-2011, 09:13 AM

Quote:

Originally Posted by blueshark123

I kind of want a spare oem hopefully it looks nice lower i kind of want to see pics since im 50/50 on this since i have 2 lips already

Here is a quick pic of what I imagine it should look like vs stock. Not too extreme but just bring the front of the lip down an inch or so to match the lines. Adrian, what do you think?

whitenoise · 11-11-2011, 10:08 AM

Quote:

Originally Posted by Salem240

Yeah pretty much what the OEM Lip is missing . If it looks like that after it done then we'll have a good lip overall

blueshark123 · 11-12-2011, 11:03 AM

honestly i think it depends on how low the car will be since to low may just make the lip rip off my car.

hey gunmetal how much will it cost to ship 2 lips at once since i live near whitenoise and dont mine sharing shipping cost with him if he doesnt mind either

upsdude · 11-12-2011, 12:00 PM

i bet this would look nice with my autech bumper

gunmetalr32 · 11-13-2011, 08:58 PM

Quote:

Originally Posted by Salem240

Unfortunately it's not.... my body man said he can't get it in until mid December now. Oh well, seems like there has been a lot of suicidal deer lately and I'd hate to have it freshly painted just to have one eff up my car. And atleast the lip has a better chance of being in there at the same time

that would suck.. having you car freshly painted only to have a dear mess it up

GIFSoup

Quote:

Originally Posted by Drftr915

Money in ya bank, from me, really looking forward to this.

got it .. i got you on the list

Quote:

Originally Posted by Salem240

Here is a quick pic of what I imagine it should look like vs stock. Not too extreme but just bring the front of the lip down an inch or so to match the lines. Adrian, what do you think?

i sent you a pic of the side profile.. thanks for the photoshop help..

Quote:

Originally Posted by whitenoise

Yeah pretty much what the OEM Lip is missing . If it looks like that after it done then we'll have a good lip overall

once it done i think everyone will be happy on the way it flow better and over all appearance of the lip

Quote:

Originally Posted by blueshark123

honestly i think it depends on how low the car will be since to low may just make the lip rip off my car.

hey gunmetal how much will it cost to ship 2 lips at once since i live near whitenoise and dont mine sharing shipping cost with him if he doesnt mind either

i don't see a problem with the lip coming off .. the greddy has a problem with blowing up on any impact with any object. i will try my best on making this lip as strong as possible

as of right now i dont know what shipping would be .. but i don't have a
problem shipping 2 lips together to save shipping cost.. as long as whitenoise is ok with it

Quote:

Originally Posted by upsdude

i bet this would look nice with my autech bumper

i bet it would.. too.. can't wait

whitenoise · 11-14-2011, 10:37 AM

Quote:

Originally Posted by blueshark123

honestly i think it depends on how low the car will be since to low may just make the lip rip off my car.

hey gunmetal how much will it cost to ship 2 lips at once since i live near whitenoise and dont mine sharing shipping cost with him if he doesnt mind either

[QUOTE=gunmetalr32

as of right now i dont know what shipping would be .. but i don't have a
problem shipping 2 lips together to save shipping cost.. as long as whitenoise is ok with it
[/QUOTE]

Maybe i can ask my friend Damian at Tarmac if I can have it shipped there so blueshark can come and pick up the lip and check out the shop at the same time

upsdude · 11-14-2011, 11:16 AM

if you're going to ship using fedex or ups shipping a lip to the east coast would run around 100 bucks due to the oversized box you'd have to use.

sw20>>s14 · 11-14-2011, 04:22 PM

Quote:

Originally Posted by gunmetalr32

i sent you a pic of the side profile.. thanks for the photoshop help..

mind sharing that pic or any other pics of the prototype/concept rendition with us too? i'm finding it hard to commit without anything to base my judgment off of.

gunmetalr32 · 11-14-2011, 04:55 PM

Quote:

Originally Posted by whitenoise

Maybe i can ask my friend Damian at Tarmac if I can have it shipped there so blueshark can come and pick up the lip and check out the shop at the same time

whatever is easier for you

Quote:

Originally Posted by upsdude

if you're going to ship using fedex or ups shipping a lip to the east coast would run around 100 bucks due to the oversized box you'd have to use.

that's what i was thinking..

Quote:

Originally Posted by sw20>>s14

mind sharing that pic or any other pics of the prototype/concept rendition with us too? i'm finding it hard to commit without anything to base my judgment off of.

i will update this thread as much as possible .. i don't have anything new at the moment

11-05-2011, 06:17 PM	#1
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	GUNMETALR32 S14 JDM Kouki OEM LIP group buy!!! OK I'm ready to start this thing.. i'm picking up my lip tomorrow.. i sould be receiving a super mint condition lip. then i will be getting started on this awesome project. they will be made just like my valances are with attention to all the small details and not rushed. all these lips will be ready for paint out of the box.. just scuff and paint.. just like any good product should be. the lips i will be making will be lower about 1" lower than oem (i will be hearing and taking input before i start) here is the link to my valances. http://zilvia.net/f/interior-exterio...-now-sale.html once the tech section is open i will post the build thread on the valances to show how in detail i went. i not sure what the price will be once finished but im going to start the group buy at $250 (on the high side, might be lower) i will need 10 people. i will be updating this thread since tech section is down!! lets get this rolling!!!!! $100 deposit will be collected to ensure the price and your spot. paypal with $100 deposit to [email protected] -yoni_nismo recived lip. 1.whitenoise-PAID 2.s13 loverr-PAID 3.Salem240-PAID sent 4.Drftr915-PAID 5.erict90-PAID 6.98_240_KA-PAID 7.harangatang-PAID 8.k0uki-PAID 9.tacotacotaco-PAID 10.cen805cal-PAID IF I CAN GET GET 15 THE PRICE WILL BE BETTER!!!!! 11.DaZeD-not paid 12.xXKoukiXx-not paid 13.ChadMcGarity-not paid 14.afmafias14-not paid 15.sickstatus-not paid 16.revat619-not paid 17.Marcus-not paid 18.spooled240-not paid here is the link to the old thead... back from dead in the tech section GUNMETALR32 S14 jdm oem kouki lip!!!! Last edited by gunmetalr32; 09-24-2012 at 08:35 PM..

11-05-2011, 06:47 PM	#3
whitenoise Zilvia Junkie Join Date: Sep 2008 Location: new york Posts: 586 Trader Rating: (23) Feedback Score: 23 reviews	im in, PM me ur paypal so i can send deposit __________________ http://TM-SPL.COM

11-06-2011, 01:27 AM	#5
sickstatus Zilvia FREAK! Join Date: Sep 2009 Location: SoCal Age: 30 Posts: 1,539 Trader Rating: (15) Feedback Score: 15 reviews	Count me in! __________________ straights are for fast cars, corners are for fast drivers.

11-06-2011, 07:54 AM	#6
ChadMcGarity Leaky Injector Join Date: Aug 2010 Location: Fredericton, New Brunswick Age: 31 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	Id be in . __________________

11-06-2011, 06:50 PM	#10
erict90 Zilvia Member Join Date: Jan 2009 Location: Austin Tx Posts: 201 Trader Rating: (9) Feedback Score: 9 reviews	Im in for the lip __________________ *Instagram: @erict90*

11-05-2011, 06:43 PM	#2
slamn240 Zilvia Addict Join Date: Feb 2007 Location: SFV Age: 34 Posts: 856 Trader Rating: (23) Feedback Score: 23 reviews	i need to get the rears off you first than ill get this off of you.

11-06-2011, 12:50 PM	#7
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	I'll be picking up the lip tonight.. Jump on the group buy guy

11-06-2011, 01:50 PM	#8
afmafias14 Zilvia Member Join Date: Feb 2010 Location: new york Age: 39 Posts: 236 Trader Rating: (7) Feedback Score: 7 reviews	im in for the front lip. what will the front lip be made out of thanks in advance.

11-06-2011, 06:57 PM	#12
Salem240 Zilvia Member Join Date: May 2011 Location: North Carolina Posts: 153 Trader Rating: (10) Feedback Score: 10 reviews	I'm in too

11-06-2011, 07:19 PM	#13
whitenoise Zilvia Junkie Join Date: Sep 2008 Location: new york Posts: 586 Trader Rating: (23) Feedback Score: 23 reviews	deposit sent , im excited for this. __________________ http://TM-SPL.COM

11-07-2011, 04:35 AM	#15
Drftr915 Zilvia Junkie Join Date: Apr 2009 Location: Hawaii/Colorado Age: 32 Posts: 423 Trader Rating: (22) Feedback Score: 22 reviews	You should definitely do a combo group buy, valances and a front lip. I have some engine parts I need to buy to get my new setup up in running but i am subscribing to your thread. Keep up the good work man, you craftsmanship is top quality, good stuff.

11-07-2011, 01:39 PM	#16
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	I kind of want a spare oem hopefully it looks nice lower i kind of want to see pics since im 50/50 on this since i have 2 lips already

11-07-2011, 04:42 PM	#17
sw20>>s14 Post Whore! Join Date: Jan 2005 Location: bay area Posts: 5,656 Trader Rating: (19) Feedback Score: 19 reviews	any package pricing with the valances? trying to imagine how this would look extended an extra inch. __________________ s14\| y34\| 911 gts\| exige s\| 600rr\| r3\| 250r\| 85 girlfriend

11-10-2011, 06:39 AM	#21
Drftr915 Zilvia Junkie Join Date: Apr 2009 Location: Hawaii/Colorado Age: 32 Posts: 423 Trader Rating: (22) Feedback Score: 22 reviews	Money in ya bank, from me, really looking forward to this.

11-12-2011, 11:03 AM	#24
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	honestly i think it depends on how low the car will be since to low may just make the lip rip off my car. hey gunmetal how much will it cost to ship 2 lips at once since i live near whitenoise and dont mine sharing shipping cost with him if he doesnt mind either

11-12-2011, 12:00 PM	#25
upsdude Post Whore! Join Date: Apr 2009 Location: Fontana (the good part) Posts: 2,721 Trader Rating: (46) Rides Gallery: upsdude Feedback Score: 46 reviews	i bet this would look nice with my autech bumper

11-14-2011, 11:16 AM	#28
upsdude Post Whore! Join Date: Apr 2009 Location: Fontana (the good part) Posts: 2,721 Trader Rating: (46) Rides Gallery: upsdude Feedback Score: 46 reviews	if you're going to ship using fedex or ups shipping a lip to the east coast would run around 100 bucks due to the oversized box you'd have to use.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode