90 s13 door pin help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nddavis2 · 09-05-2020, 11:15 AM

I have a sagging driver side door and realized one of the bushings for the lower hinge pin was missing. I pulled the top one no issue. Tried pulling the botton and what happened? The head of the pin broke off. No bit deal right? Wrong...the pin is stuck in there. I have tried a punch and hammer, and current have pb blaster soaking it. Anyone have a good idea here? I'm thinking about heating it and using a punch next.

Sent from my SM-G950U using Tapatalk

zombiewolf513 · 09-05-2020, 12:10 PM

drill out the center of it

S14rebuild · 09-05-2020, 01:09 PM

Remove door hinge
Throw in trash
Buy new/replacement hinge
Replace hinge

Dont bother with the pins..shitty setup and never seen a new pin and bushing last after repair

nddavis2 · 09-05-2020, 01:11 PM

Was thinking about drilling out but of course if I could get it out without taking the door off, that would be nice.

Remove the hinge? The piece with pin stuck in it is that not welded omt the door itself?

Sent from my SM-G950U using Tapatalk

09-05-2020, 11:15 AM	#1
nddavis2 Zilvia Member Join Date: Sep 2009 Location: SC Age: 39 Posts: 209 Trader Rating: (4) Feedback Score: 4 reviews	90 s13 door pin help I have a sagging driver side door and realized one of the bushings for the lower hinge pin was missing. I pulled the top one no issue. Tried pulling the botton and what happened? The head of the pin broke off. No bit deal right? Wrong...the pin is stuck in there. I have tried a punch and hammer, and current have pb blaster soaking it. Anyone have a good idea here? I'm thinking about heating it and using a punch next. Sent from my SM-G950U using Tapatalk

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-05-2020, 12:10 PM	#2
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 33 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	drill out the center of it

09-05-2020, 01:09 PM	#3
S14rebuild BANNED Join Date: May 2019 Location: Florida-FAIL Posts: 2,497 Trader Rating: (8) Feedback Score: 8 reviews	Remove door hinge Throw in trash Buy new/replacement hinge Replace hinge Dont bother with the pins..shitty setup and never seen a new pin and bushing last after repair

09-05-2020, 01:11 PM	#4
nddavis2 Zilvia Member Join Date: Sep 2009 Location: SC Age: 39 Posts: 209 Trader Rating: (4) Feedback Score: 4 reviews	Was thinking about drilling out but of course if I could get it out without taking the door off, that would be nice. Remove the hinge? The piece with pin stuck in it is that not welded omt the door itself? Sent from my SM-G950U using Tapatalk