Kingtal0n

Hello fellow zilvians,

I need some experienced advice.

The last thing on my list for the new car is fuel system. I've never seen or used "posh loc" style hose before and I need to know more about how to use it correctly.

1. I want to know if I can use this hose
http://www.ebay.com/itm/3-8-Syntheti...ZXjsy5&vxp=mtr

and clamp it directly onto the factory feed and return lines, and if not, how to go about doing that.

2. Next, I want to know if this barb fitting
http://www.ebay.com/itm/BLUE-3-8-bar...FUwSi3&vxp=mtr

which just says "barb" can be used somehow, and if the push loc line wont clamp to the factory feed/return, then I can use basic rubber fuel hose with these barb fittings in an aeromotive regulator to fuel the engine.

And finally ,
I want to use this regulator
http://www.ebay.com/itm/Aeromotive-1...torefresh=true

With some 6-an fittings, either push loc, or basic barb, unless you experienced have another regulator in mind (I've never bought a regulator before, always used OEM stuff). This is for LSx application 600~bhp.

__________________
5.3/4l80e/turbo 240sx playthrough:
https://tinyurl.com/turbo240