circuit sports seat rail problems - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SnaggleToof · 04-30-2013, 12:51 AM

I thought these rails were supposed to be good... and super low. got mine in the mail today, and it doesnt even come close to fitting my 1995 240sx, and they seem to be pretty high... tons of room to go lower.

doesnt even come close to the hole...

crazy angle

ultimateirving · 05-01-2013, 07:48 PM

Did they send the wrong ones? S13 or something mayb i dunno
Also the first pic looks like you have the slider handle from the passenger side...
Only one should have a handle AMIRITE?

Prok0 · 05-02-2013, 09:45 AM

I have the same rails, once you actually tighten them down it will suck the back mounting bolt hole on the outter rail basically where it needs to be. The inner rail bolted up for me no problem.

Its definitely tight, but it will work pending on what seat you use.

Also they room under the rails will be there because the bucket seat will drop lower once you put the brackets on the side, and the bottom of the seat will sit lower than the rails themselves.

I have it installed in my car with a Recaro Pole Position and the seating position is pretty low.

SnaggleToof · 05-28-2013, 08:09 PM

So i had to bend the left side rail to make it work, put my bride vios low max seat in and my head is almost touching the roof (with no roof liner too)

Sold the bride and bought a sparco sprint, same problem. Therr is at least 3-4 i ches between the bottom of the seat and the floor... Probably going to toss this rail in the garbage and make my own.

04-30-2013, 12:51 AM	#1
SnaggleToof Leaky Injector Join Date: Mar 2013 Location: Edmonton Age: 32 Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	circuit sports seat rail problems I thought these rails were supposed to be good... and super low. got mine in the mail today, and it doesnt even come close to fitting my 1995 240sx, and they seem to be pretty high... tons of room to go lower. doesnt even come close to the hole... crazy angle

05-01-2013, 07:48 PM	#2
ultimateirving Zilvia FREAK! Join Date: Nov 2010 Location: arizona Age: 33 Posts: 1,519 Trader Rating: (1) Feedback Score: 1 reviews	Did they send the wrong ones? S13 or something mayb i dunno Also the first pic looks like you have the slider handle from the passenger side... Only one should have a handle AMIRITE? __________________ Z32 with lq4 swap Desert Street Scene \|\| Dssevents.com

05-02-2013, 09:45 AM	#3
Prok0 Zilvia Junkie Join Date: Apr 2003 Location: FL Age: 34 Posts: 376 Trader Rating: (0) Feedback Score: 0 reviews	I have the same rails, once you actually tighten them down it will suck the back mounting bolt hole on the outter rail basically where it needs to be. The inner rail bolted up for me no problem. Its definitely tight, but it will work pending on what seat you use. Also they room under the rails will be there because the bucket seat will drop lower once you put the brackets on the side, and the bottom of the seat will sit lower than the rails themselves. I have it installed in my car with a Recaro Pole Position and the seating position is pretty low. __________________ Sales @ Enjuku email:[email protected] phone:352-241-8399

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-28-2013, 08:09 PM	#4
SnaggleToof Leaky Injector Join Date: Mar 2013 Location: Edmonton Age: 32 Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	So i had to bend the left side rail to make it work, put my bride vios low max seat in and my head is almost touching the roof (with no roof liner too) Sold the bride and bought a sparco sprint, same problem. Therr is at least 3-4 i ches between the bottom of the seat and the floor... Probably going to toss this rail in the garbage and make my own.