s13 manual tranny to a s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

madevo99 · 12-21-2012, 01:31 PM

i just got a 95 s14 but automatic

i was wondering if a s13 manual tranny would fit my s14

89hatchman · 12-22-2012, 01:00 AM

I've heard that as long as the tranny bell housing is a DOHC then it should mate up.

So long as the tranny is from a 91-94 then I think you're good to go.

s13-LBC-562 · 12-25-2012, 03:15 AM

all are the same just the bell housing is different the s14 bell housing has a sensor on top of the bell housing and the s13 don't

Sileighty_85 · 12-25-2012, 03:54 AM

all KA 89-98 transmissions are the same

240sxDavid · 12-25-2012, 04:11 AM

Even sohc and Dohc?

KravingAKouki · 12-25-2012, 03:17 PM

Quote:

Originally Posted by 240sxDavid

Even sohc and Dohc?

The tranny's are identical, the engine's aren't

Sileighty_85 · 12-25-2012, 05:15 AM

Yes, they are the same

240sxDavid · 12-25-2012, 04:53 PM

[ATTACH]48081
Thanks zilvia:thumbup::thumbup:

Jack Bauer S14 · 12-25-2012, 07:17 PM

I've heard that you also need the ecu from the manual and a sensor which the s14 has. I am planning to do it also but it may take a while to find everything. I believe those two are the biggest problems.

Sent from my XT910 using Tapatalk 2

dat925stunna · 12-25-2012, 08:52 PM

Im running a s13 5spd tranny on my s14 with my auto ecu my car runs perfectly fine with no c.a.s

Sent from my iPhone using Tapatalk

brewster240 · 12-25-2012, 08:57 PM

Quote:

Originally Posted by Sileighty_85

all KA 89-98 transmissions are the same

Quote:

Originally Posted by 240sxDavid

Even sohc and Dohc?

Quote:

Originally Posted by Sileighty_85

Yes, they are the same

Quote:

Originally Posted by KravingAKouki

The tranny's are identical, the engine's aren't

they are not exactly the same, but all will bolt in place of each other.

the s14 has a crank angle senor that reads off the flywheel. the sensor bolts into the top of the bellhousing. s13 does not have a spot for it.

Quote:

Originally Posted by Jack Bauer S14

I've heard that you also need the ecu from the manual and a sensor which the s14 has. I am planning to do it also but it may take a while to find everything. I believe those two are the biggest problems.

Sent from my XT910 using Tapatalk 2

the car will run fine, but you will have trouble codes/check engine light. it will throw a code for crank sensor, and 2 different auto trans trouble codes.

Sileighty_85 · 12-25-2012, 09:36 PM

Quote:

Originally Posted by brewster240

they are not exactly the same, but all will bolt in place of each other.

Oh Dear God..... same gear ratio, same mounting holes.... Its the same transmission.... the S14 just has a hole in the bellhousing.....

brewster240 · 12-25-2012, 10:39 PM

yeah, and if he cares about his check engine light, he will want the s14 trans.

when someone like you tells them they are the same, and then finds out they arent, it sucks.

Sileighty_85 · 12-26-2012, 02:07 AM

Quote:

Originally Posted by brewster240

yeah, and if he cares about his check engine light, he will want the s14 trans.

when someone like you tells them they are the same, and then finds out they arent, it sucks.

Cuz its so hard to drill a hole through Aluminum.

His question was "will it fit" answer to said question is yes it will fit.

Jack Bauer S14 · 12-26-2012, 02:04 AM

Mmmm maybe I'll try the swap for the S13 since it's easier to get... Although I would mind about the check engine light, hahaha I always make fun of Volkswagens with their dash boards lighting up like a christmas tree from all the warning lights.

bussitcustoms · 12-26-2012, 02:07 AM

I blew the trans in my s14 and replaced it with an s13 KA trans. Drilled the hole for the sensor, and that was that. No CEL, no issues.

brewster240 · 12-26-2012, 07:06 AM

Stfu nerd, you didn't even mention the damn sensor so he could do that, you just said they are the same.

Who did you pay for that guru tag? Always going around give 1/2 info.

Sileighty_85 · 12-26-2012, 07:52 AM

Quote:

Originally Posted by brewster240

Stfu nerd, you didn't even mention the damn sensor so he could do that, you just said they are the same.

Who did you pay for that guru tag? Always going around give 1/2 info.

he didnt ask about the sensor. All he asked is would it fit.

Now if he asked will it fit and is anything else needed to make the S13 trans work with the S14 electrical system then that info might have been given.

Remember not everyone has to deal with Cali's Gay ass laws.

Also my guru tag only mentions SR's and RB's. Not KA's which that sensor is for KA's only

How bout you check out my build threads and see how much 1/2 info I give out.

Lawyer'd

brewster240 · 12-26-2012, 05:10 PM

I'm not in cali, he is. Your post is dumb.

Sileighty_85 · 12-26-2012, 07:25 PM

Quote:

Originally Posted by brewster240

I'm not in cali, he is. Your post is dumb.

Yes i know which is why I mentioned the Cali thing because you referred to the sensor which only Cali really cares about it.....

You do know that sensor is for OBD systems only, it will not affect how the engine runs at all. So those of us that dont care about it dont worry about it

brewster240 · 12-26-2012, 07:43 PM

and again, he is in cali, so you should have mentioned it, if you knew. you probably didnt. keep arguing with me, youlll still be wrong.

any state that has obd2 inspections will care about it actually. you must be an expert.

bussitcustoms · 12-26-2012, 09:11 PM

You're both acting like children. You're splitting hairs. How about someone decides to be the bigger person here? Because you both look like nine year olds arguing over some dumb shit that doesn't even matter.

If you were arguing over the IMPORTANCE of the sensor, that would be one thing. You're not though. You're arguing about one of you neglecting to give that information. Really? Children, settle down.

Sileighty_85 · 12-27-2012, 03:15 AM

Quote:

Originally Posted by bussitcustoms

You're both acting like children. You're splitting hairs. How about someone decides to be the bigger person here? Because you both look like nine year olds arguing over some dumb shit that doesn't even matter.

If you were arguing over the IMPORTANCE of the sensor, that would be one thing. You're not though. You're arguing about one of you neglecting to give that information. Really? Children, settle down.

im sorry I fail to see how any of my post makes me sound like a child.
Maybe if I was screaming in CAPS and throwing cuss words and your momma insults then yeah i could see that.

Arguing over the importance of that sensor would be childish since there is no importance.

Contrary to what your parents led you to believe as a child, Grown men argue as well. So unless you have something important to add to this thread Mister 331 posts I kindly ask you to Fuck Off.

Thanks.

brewster240 · 12-26-2012, 09:17 PM

you stfu too.

bussitcustoms · 12-26-2012, 09:21 PM

Uh oh, we got a badass over here.

brewster240 · 12-26-2012, 09:44 PM

Quote:

Originally Posted by bussitcustoms

interesting.

bussitcustoms · 12-26-2012, 09:53 PM

Wow, and you're 30? Looks like someone missed out on their childhood. Grow up fella.

brewster240 · 12-26-2012, 10:16 PM

blah blah blah

bussitcustoms · 12-28-2012, 12:11 AM

My bad, should have realized interjecting between two babies would be a bad idea. Glad we sorted out that whole sensor issue though, that was a real brain buster.

bussitcustoms · 12-28-2012, 12:12 AM

Ps, I've been on this forum since 04. I forgot my password and just started a new one. But thanks for "pulling rank," I'm sure it made you feel bigger.

12-21-2012, 01:31 PM	#1
madevo99 Join Date: Nov 2012 Location: gardena Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	s13 manual tranny to a s14 i just got a 95 s14 but automatic i was wondering if a s13 manual tranny would fit my s14 Last edited by madevo99; 12-21-2012 at 05:42 PM..

12-25-2012, 03:54 AM	#4
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	all KA 89-98 transmissions are the same __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

12-25-2012, 05:15 AM	#7
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Yes, they are the same __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

12-25-2012, 08:52 PM	#10
dat925stunna Zilvia Junkie Join Date: Mar 2010 Location: west pitt Cali Age: 32 Posts: 585 Trader Rating: (8) Feedback Score: 8 reviews	Im running a s13 5spd tranny on my s14 with my auto ecu my car runs perfectly fine with no c.a.s Sent from my iPhone using Tapatalk __________________ The heep S14

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-22-2012, 01:00 AM	#2
89hatchman Zilvia Member Join Date: Dec 2012 Location: In the west Posts: 295 Trader Rating: (0) Feedback Score: 0 reviews	I've heard that as long as the tranny bell housing is a DOHC then it should mate up. So long as the tranny is from a 91-94 then I think you're good to go.

12-25-2012, 03:15 AM	#3
s13-LBC-562 Zilvia Member Join Date: Apr 2012 Location: long beach Age: 98 Posts: 243 Trader Rating: (9) Feedback Score: 9 reviews	all are the same just the bell housing is different the s14 bell housing has a sensor on top of the bell housing and the s13 don't

12-25-2012, 07:17 PM	#9
Jack Bauer S14 Join Date: Dec 2012 Location: Mexico City Age: 32 Posts: 37 Trader Rating: (0) Feedback Score: 0 reviews	I've heard that you also need the ecu from the manual and a sensor which the s14 has. I am planning to do it also but it may take a while to find everything. I believe those two are the biggest problems. Sent from my XT910 using Tapatalk 2

12-25-2012, 10:39 PM	#13
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	yeah, and if he cares about his check engine light, he will want the s14 trans. when someone like you tells them they are the same, and then finds out they arent, it sucks.

12-26-2012, 02:04 AM	#15
Jack Bauer S14 Join Date: Dec 2012 Location: Mexico City Age: 32 Posts: 37 Trader Rating: (0) Feedback Score: 0 reviews	Mmmm maybe I'll try the swap for the S13 since it's easier to get... Although I would mind about the check engine light, hahaha I always make fun of Volkswagens with their dash boards lighting up like a christmas tree from all the warning lights.

12-26-2012, 02:07 AM	#16
bussitcustoms Zilvia Junkie Join Date: Jan 2012 Location: philly pa Posts: 409 Trader Rating: (5) Feedback Score: 5 reviews	I blew the trans in my s14 and replaced it with an s13 KA trans. Drilled the hole for the sensor, and that was that. No CEL, no issues.

12-26-2012, 07:06 AM	#17
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	Stfu nerd, you didn't even mention the damn sensor so he could do that, you just said they are the same. Who did you pay for that guru tag? Always going around give 1/2 info.

12-26-2012, 05:10 PM	#19
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	I'm not in cali, he is. Your post is dumb.

12-26-2012, 07:43 PM	#21
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	and again, he is in cali, so you should have mentioned it, if you knew. you probably didnt. keep arguing with me, youlll still be wrong. any state that has obd2 inspections will care about it actually. you must be an expert.

12-26-2012, 09:11 PM	#22
bussitcustoms Zilvia Junkie Join Date: Jan 2012 Location: philly pa Posts: 409 Trader Rating: (5) Feedback Score: 5 reviews	You're both acting like children. You're splitting hairs. How about someone decides to be the bigger person here? Because you both look like nine year olds arguing over some dumb shit that doesn't even matter. If you were arguing over the IMPORTANCE of the sensor, that would be one thing. You're not though. You're arguing about one of you neglecting to give that information. Really? Children, settle down.

12-26-2012, 09:17 PM	#24
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	you stfu too.

12-26-2012, 09:21 PM	#25
bussitcustoms Zilvia Junkie Join Date: Jan 2012 Location: philly pa Posts: 409 Trader Rating: (5) Feedback Score: 5 reviews	Uh oh, we got a badass over here.

12-26-2012, 09:53 PM	#27
bussitcustoms Zilvia Junkie Join Date: Jan 2012 Location: philly pa Posts: 409 Trader Rating: (5) Feedback Score: 5 reviews	Wow, and you're 30? Looks like someone missed out on their childhood. Grow up fella.

12-26-2012, 10:16 PM	#28
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	blah blah blah

12-28-2012, 12:11 AM	#29
bussitcustoms Zilvia Junkie Join Date: Jan 2012 Location: philly pa Posts: 409 Trader Rating: (5) Feedback Score: 5 reviews	My bad, should have realized interjecting between two babies would be a bad idea. Glad we sorted out that whole sensor issue though, that was a real brain buster.

12-28-2012, 12:12 AM	#30
bussitcustoms Zilvia Junkie Join Date: Jan 2012 Location: philly pa Posts: 409 Trader Rating: (5) Feedback Score: 5 reviews	Ps, I've been on this forum since 04. I forgot my password and just started a new one. But thanks for "pulling rank," I'm sure it made you feel bigger.