Bung on s13 ka24de downpipe - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ownz · 08-01-2014, 09:25 PM

So, I've searched for days and in multiple forums and even went to the dealer and can't find an answer. There is a threaded hole on my stock downpipe that is really close to the steering column. It actually faces almost directly at it. I thought at first it was for an o2 sensor but when I tried to plug one in, the hole was too large. I've seen this hole welded shut as well. I will post a picture when I can lift the car back up. But does anybody know what goes in there or if I can just plug it up. If you know the size of the plug that would save me as well.

Thanks in Advance.

waxball88 · 08-01-2014, 09:29 PM

I'm guessing this is where the EGR re-route too?
Weld it up.

ownz · 08-01-2014, 09:54 PM

I added a pic. Is that the only option? I feel threads in there, maybe a plug would suffice?

Banana_Cute · 08-01-2014, 10:56 PM

EGR. You can find a bolt to fit that shut

ownz · 08-02-2014, 12:30 AM

Correct me if I'm wrong, the egr tube is above the o2 sensor. And you can see both from a top view of the engine bay. The hole I'm referring to can pretty much be seen only from the bottom of the car. I took the picture of the unplugged hole being under the car. I also have a picture of what I believe the egr is(being hooked up as well, while the original hole, the first pic, is still unplugged).

ownz · 08-05-2014, 09:46 PM

So it was a hole for the AIV. Thanks for the help everyone.

08-01-2014, 09:54 PM	#3
ownz Join Date: Apr 2008 Location: SoCal Age: 35 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	I added a pic. Is that the only option? I feel threads in there, maybe a plug would suffice? Last edited by ownz; 08-01-2014 at 09:56 PM.. Reason: Grammar.

08-01-2014, 10:56 PM	#4
Banana_Cute Zilvia FREAK! Join Date: Jan 2011 Location: Irvine, So. Cal. Posts: 1,338 Trader Rating: (16) Feedback Score: 16 reviews	EGR. You can find a bolt to fit that shut __________________ Simplicity is the key to brilliance

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-01-2014, 09:29 PM	#2
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	I'm guessing this is where the EGR re-route too? Weld it up.

08-05-2014, 09:46 PM	#6
ownz Join Date: Apr 2008 Location: SoCal Age: 35 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	So it was a hole for the AIV. Thanks for the help everyone.