Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 08-13-2015, 05:44 AM   #1
Kimosabi
 
Join Date: Nov 2010
Location: Altoona, Pa
Posts: 21
Trader Rating: (0)
Kimosabi is an unknown quantity at this point
Feedback Score: 0 reviews
Low Idle on Cold Start?

Anytime I go to start my s13 in the morning it cranks over fine but it'll idle a little over 1000 rpm. It is not a rough idle it just idles low on start up.

Idle also jumps when coming to a stop. Are these things something I should be worried about? Will they give me problems down the line?

The car is an auto to manual swap with auto ecu.
Kimosabi is offline   Reply With Quote
Sponsored Links
Old 08-17-2015, 08:10 PM   #2
Kimosabi
 
Join Date: Nov 2010
Location: Altoona, Pa
Posts: 21
Trader Rating: (0)
Kimosabi is an unknown quantity at this point
Feedback Score: 0 reviews
bump

I feel like this could be an IACV problem?
Kimosabi is offline   Reply With Quote
Old 08-18-2015, 06:21 PM   #3
kruked
Nissanaholic!
 
Join Date: Feb 2012
Location: someone's sisters' pants
Posts: 2,288
Trader Rating: (37)
kruked is an unknown quantity at this point
Feedback Score: 37 reviews
Same issue w/ cold start in the morning. Idles extremely low, (5-700ish) and seems like it wants to stall. Happens for about a minute or so and problem goes away. Normal idle is around 1200 on a regular basis have yet to figure it out because I never have the time to tear into it.
__________________
I like my bikes how I like my b¡tches...naked!
2014 Triumph Street Triple
kruked is offline   Reply With Quote
Old 09-11-2015, 05:59 AM   #4
Kimosabi
 
Join Date: Nov 2010
Location: Altoona, Pa
Posts: 21
Trader Rating: (0)
Kimosabi is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by kruked View Post
Same issue w/ cold start in the morning. Idles extremely low, (5-700ish) and seems like it wants to stall. Happens for about a minute or so and problem goes away. Normal idle is around 1200 on a regular basis have yet to figure it out because I never have the time to tear into it.
yeah same no time at all. Runs and drives good apart from the valve seals causing a little smoke on start up so I'm really not that worried.
Kimosabi is offline   Reply With Quote
Old 09-11-2015, 06:05 AM   #5
zombiewolf513
BANNED
 
Join Date: Mar 2011
Location: AZ
Age: 33
Posts: 1,682
Trader Rating: (6)
zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513
Feedback Score: 6 reviews
Check your throttle body, if I'm not mistaken there's a little pin like thing that is supposed to hold open the throttle a little during cold start until the water heats up and it retracts
zombiewolf513 is offline   Reply With Quote
Old 09-11-2015, 03:02 PM   #6
cotbu
Post Whore!
 
cotbu's Avatar
 
Join Date: Sep 2005
Location: SWFL
Age: 47
Posts: 3,318
Trader Rating: (3)
cotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nice
Feedback Score: 3 reviews
Quote:
Normal idle is around 1200 on a regular basis have yet to figure it out because I never have the time to tear into it.
Quote:
yeah same no time at all. Runs and drives good apart from the valve seals causing a little smoke on start up so I'm really not that worried.
ummmm!
__________________

LoverTechnologies "Half Broken Things!"
cotbu is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:32 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™